Тёмный

How To Change Rear Diff Oil 2005 Sierra 1500 GMT800 | 1999-2007 Silverado Avalanche Tahoe Yukon 

Kevin
Подписаться 441
Просмотров 10 тыс.
50% 1

Buy something cool for your friends - keln.net
Join me in this comprehensive tutorial as I demonstrate how to change the rear differential oil on my 2005 Sierra 1500 GMT800, a process applicable to various 1999-2007 GM vehicles like Silverado, Avalanche, Tahoe, and Yukon. Maintaining your rear differential is crucial for optimal performance and longevity.
In this step-by-step guide, I'll share my hands-on experience and offer valuable tips to make this task accessible to both experienced DIY mechanics and beginners. Keeping your rear differential oil fresh is key to ensuring smooth and reliable operation of your vehicle.
Don't forget to subscribe to my channel, give this video a thumbs up, and activate notifications for more informative automotive tutorials. Let's get started on this rear differential oil change journey! #Sierra1500 #RearDiffOilChange #DIYAutoMaintenance #GMT800

Авто/Мото

Опубликовано:

 

15 дек 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 35   
@j.moneyfilms
@j.moneyfilms 26 дней назад
9:24 semper fi Thank you so much for this video, and the wire hanger tip is 100% a lifesaver.
@funcle_kevin
@funcle_kevin 26 дней назад
Semper fi! I'm glad it helped!
@hud351
@hud351 3 месяца назад
So lucky my 2002 Yukon SLT had the drain plug! I did a little happy dance. I had to do the whole cover on my 06 Escalade.
@funcle_kevin
@funcle_kevin 3 месяца назад
Awesome! If I remember correctly, the Yukon might have a factory drain plug for the transmission pan as well, which also makes that job much less frustrating.
@hud351
@hud351 3 месяца назад
Yes it does. Although you only get like 3 quarts out at a time.
@funcle_kevin
@funcle_kevin 3 месяца назад
@@hud351 That's still a lot better than 4 quarts dumping onto your driveway!
@idecidenotyou
@idecidenotyou 7 месяцев назад
Well you did a great video I got to tell you man you did amazing on your commentary perfect visuals gave us a ton of information that most people don't even really think to go into we can tell you did your research I would have you know took the extra time and cleaned out the inside of it just because I'm not anal but after watching you do this and you done it quite a few times I don't think I'll need to do that either think I'll just drain it, clean up the areas and reapply it. Learns quite a bit watching this good job man look forward to seeing more of this type of content
@funcle_kevin
@funcle_kevin 7 месяцев назад
I'm glad the video helped, and I appreciate your feedback. It's been my experience that looking for metal shavings at this point is a waste of time. I know a lot of people do it, but after the break-in period, a properly lubed gear won't be an issue unless there is a major mechanical failure. That failure would be obvious, meaning I'd be opening the diff knowing chunks of metal will be falling out. In the absence of abuse, the G80 is pretty reliable. It gets a bad reputation (much like the 4L60e) by people who add too much power to the engine without beefing up the rest of the driveline. This will never work out well in the long run.
@kellismith4329
@kellismith4329 3 месяца назад
Lube locker makes a fantastic gasket for these, they are thick gaskets and reuseable part #LLR-G850 If you are looking to replace the cover, it is worthwhile to order the GM replacement as it includes a gasket, the mounting bolts, and the bracket for the brakeline
@funcle_kevin
@funcle_kevin 3 месяца назад
I've been meaning to replace the cover for a few years. This might be the summer it finally gets replaced!
@BooBoo-vo6oh
@BooBoo-vo6oh 2 месяца назад
Trying this tomorrow. 130,000. I think it's time.
@funcle_kevin
@funcle_kevin Месяц назад
Sorry for the late reply. I just saw your comment. How did everything go?
@paulponce4711
@paulponce4711 6 месяцев назад
One for Chesty... Rahhh
@tonytan0
@tonytan0 Год назад
Hey I have a 2002 Suburban 1500, but it looks like we have the same 10 bolt rear end. My issue is someone stripped my fill plug and I am looking for a replacement part number. It is basically non-existent. I was wondering if you could measure the threads and tell me what the thread is on that fill plug. So i can look for a replacement before i tap and extract the plug out.
@funcle_kevin
@funcle_kevin Год назад
Unfortunately, my thread checker doesn't go up that big, but from my research, it looks like the fill plug is a 1/2" NPT. Keep in mind that there could be minor variations within the GMT800 line (for example, my cabin air filter is not serviceable, which is unique to just a few years of the line). It looks like Dorman makes a replacement that is sold at Advanced and Mr. Gasket makes one that is available at Auto Zone (both use a hex head instead of the 3/8" ratchet head). From everything I could gather, this is just a steel plug, so even a 1/2" NPT bolt from Home Depot should do the trick. If there's a scrapyard near you, I'd recommend stopping by there and pulling one from another '02 if they'll sell it without buying the whole housing. I hope this helps.
@tonytan0
@tonytan0 Год назад
@@funcle_kevin you sir! are a life saver. and that hex head would benefit me 50,000 miles later. Thank you !
@funcle_kevin
@funcle_kevin Год назад
@@tonytan0You are quite welcome; I'm glad I could help!
@kgpeck8475
@kgpeck8475 Год назад
Great video, torque spec please?
@funcle_kevin
@funcle_kevin Год назад
Thanks for the feedback! Surprisingly, there are no torque specs for the differential cover. The general consensus is that they should be between 20-30 ft-lbs, but I don't have anything definitive. At one point, it was recommended to use new bolts each time (I believe this is the reason for the torque range -- the bolts need to be tightened more over time if reused). There is, however, a torque spec for the fill plug, but it's different throughout the GMT-800 years. For a 1999, the rear diff fill plug is torqued to 45 ft-lbs; for 2000 and 2001, it is torqued to 24; for 2002-2007 (before the body change), it is torqued to 20 ft-lbs if you have a 9.75" ring gear, and to 24 ft-lbs if you have anything other than the 9.75" ring gear. I hope this helps. Let me know if you have any other questions; I'll do my best to respond quickly.
@kgpeck8475
@kgpeck8475 Год назад
@@funcle_kevin Great info, TYVM! Now onto my 2000 YukonXL 🤠👍
@funcle_kevin
@funcle_kevin Год назад
@@kgpeck8475 Glad I could help!
@kellismith4329
@kellismith4329 3 месяца назад
30 ft lbs
@CArbon865
@CArbon865 5 месяцев назад
How about fill to spill?
@funcle_kevin
@funcle_kevin 5 месяцев назад
That's definitely not recommended for the rear diff. There won't be enough room for expansion and the oil will become frothy as it heats up and lose its lubricity and cooling properties. It still annoys me that they didn't just put the fill hole lower so it could be simpler (like the front diff and transfer case).
@kellismith4329
@kellismith4329 3 месяца назад
@@funcle_kevin just fill it and suck some out with a turkey baster
@anthonyrettaliata7311
@anthonyrettaliata7311 Год назад
Is that a cork gasket?
@funcle_kevin
@funcle_kevin Год назад
No. I'm pretty sure it's cellulose but Fel-Pro doesn't give specifics on their materials as far as I know.
@kellismith4329
@kellismith4329 3 месяца назад
It’s paper, you can get cork ones that have a metal stiffener
@tommytwo-tips5785
@tommytwo-tips5785 3 месяца назад
I just did mine, pumped 4 quarts into the rear and it never spilled out…
@funcle_kevin
@funcle_kevin 3 месяца назад
In a 1500 with the factory diff? Something is not right. For starters, the rear diff isn't a fill and spill set up, it needs to be a specific distance below the fill hole. Regardless, with 4 qts, you should have seen some spill out. Without seeing it, I would have to guess the truck either wasn't level, or has a rear diff from a 2500 or 3500.
@tommytwo-tips5785
@tommytwo-tips5785 3 месяца назад
@@funcle_kevin or a leak in the axle seal/gaskets?
@funcle_kevin
@funcle_kevin 3 месяца назад
@@tommytwo-tips5785 Definitely possible, although I would think they'd have to be almost nonexistent for the oil to push past them without any resistance. You could pull a tire and see if you see oil pouring out, but the absence of oil doesn't necessarily disprove the theory.
@kellismith4329
@kellismith4329 3 месяца назад
@@tommytwo-tips5785 wouldn’t you see that leaking out as you fill it?
@tommytwo-tips5785
@tommytwo-tips5785 3 месяца назад
@@kellismith4329 no I didn’t! I laid under my truck for 25 minutes. Had no idea where it was going, but I took it around the block and came back and it was leaking. Saw it coming from the passenger axle where it meets the diff. It’s in the shop right now, I’d do it myself but I’m in the middle of packing to move so didn’t want the extra stress
Далее
How to Change Rear Differential Fluid | 2003 Suburban
15:16
Бмв сгорела , это нормально?
01:01
2005 Sierra Pitman Arm Replacement - EASY WAY!
21:25
Просмотров 17 тыс.
Rear Differential Gasket Replacement GMC Yukon 2005
8:32
BYD U8 танковый разворот
1:00
Просмотров 2,2 млн
Manual installation process of highway guardrail
0:15
Самая дорогая реклама Lexus forever
0:15