HOW TO FORSCAN F150, +Bambi mode, Disable start/stop, door chime 

yup.. a crona...dude is litterly drinking and driving...

Through a Ford engineering study that they did the auto start/stop saved between 1.9%-11% in new York city traffic. So unless your driving in that the amount your saving is less than 1mpg.

@@WICKEDAUTO1 I live on the coast, Gloucester, Ma to be exact. We have a drawbridge that separates Gloucester in two, an island side and the mainland. The Blynman Bridge avg. 10k openings per year making it one of the busiest in the world. Marine traffic has right of way and it's common to wait 15 minutes or more. Us locals are used to turning off our engines while waiting. I think Ford had us in mind when developing the Auto Start/Stop feature!

@@CapeAnnImages o wow, not only do I envy your location but this feature is definitely made for yall! Lol

@@WICKEDAUTO1 Here's the story on my F-150 and a little snap shot of where I live. capeannimages.blogspot.com/2017/10/new-wheels-for-lens.html

@@WICKEDAUTO1 1 mpg in a 26 gallon tank is about $5 per tank around here. It adds up if you drive in traffic most of the time. I think most people who complain about it have never seen traffic before and in that case they are perfectly justified. I bought my 2019 F150 used and this was already done. I am one of the few who want to re enable it. I think for most people if Ford just reversed the switch so it enables it rather than disables it, Ford would have a hit on their hands . . . then in the menu give you the option to reverse the switch so its on by default or vice versa. Now I just need to find where to get a copy of that spreadsheet. . . . OK this is an update . .. I found a spreadsheet but its not for my vehicle. If I use the before settings for the engine stop start (from this video) it thinks my truck is a 4 x 4 and since it is a 4 x 2 it throws a code. I need the stock settings for a F150 2WD for stop start.

nothing voids the warranty unless they can prove that whatever you did is what caused the problem. With forscan as long as you save your factory settings before making at changes, you can always change back to factory.

Ford has their ETIS site where you enter your vin and get the *Just-left-the-factory* configurations in case something does go wrong, and its not a module failure.

Bryan Dunn do you have a link?

CORRECTION!!!!: I was partially incorrect, buried in the ETIS site is a link for where to obtain the AS-BUILT data. The site is: motorcraftservice.com/AsBuilt

Shawn J I have a 19 platinum too, have you made any changes yet? I’ve tried, and so far there are a lot of modules that didn’t pop up for me. I changed the double honk when leaving the truck with it still running, and add the heated/cooled seats to the home screen. No my TPMS is displaying. Have you run into this yet?

Its from the forum, enjoy all the changes!

docs.google.com/spreadsheets/d/1uDSQ1Z5a2Wt8-kjrSiVSlDFGFHnfeuhb3RTMVz95730/edit#gid=815852466

It turns it off but it also then doesn't allow the battery management system to work, no idea what all that entails though

WICKEDRIDESZ Oooh okay I thought it would make the deffault to off, makes sense thanks

In the description

WickedF150 Thank you for the fast reply. I’m don’t mean to keep bugging you man, but do you have any idea where or how I can find spreadsheets like what you showed but for a 17 fusion vs. f150s? I would greatly appreciate your help man.

@@rjlott9453 no problem and your fine man that's exactly what the channel is for! There is not spreadsheets for other models, 15+ Fords are basically the same. I programmed my wife's edge with the same spreadsheet. Some is different so just have to try your luck. I wouldnt add extra features but just changing stuff like...screen background/theme, seatbelts dings, global windows...all that is fine.

I believe the forscan fix is for any trim level. Just check the spreadsheet for the change and see what the truck says and just go from there.

Its just programmed differently, not all programming through forscan will work on all their models

Send a picture to the fb page facebook.com/WickedF150-109302690410438/

More than likely not as this spreadsheet is 15+ but im not sure of any for a 12 escape

THE DESCRIPTION

The forum

The factory 5 in wide ones...

I am not sure, you should check the forscan website forums and/or spreadsheet to see if it's possible

I know this is way late, some cable need an update software to work properly.

@@akbychoice I appreciate the advice. I had to buy a Bluetooth adapter, it worked fine.

Believe it can only be through an actual tune

Forscan is a poke at the VW original, called VAGCOM.

No that's not possible that I know of. I changed the whole theme/color of the entire sync system but the navigation is the same no matter what. I had changed it to where I could type in an address while driving with forscan, I'm not sure anymore what section that was in

No they haven't at all, they knew from the very first visit that I changed stuff. And they also cannot, not honor the warranty just because of that depending on what you change of course. For instance doing the global windows...that has zero affect on anything else so if your engine stops running right they cant say its because of the window through forscan. Plus you can always put everything back to stock before you take it in.

I wanted to be upfront with my dealership too before I did any modifications, but they are not comfortable about them at all. I live in a smaller town. They don’t they get many folks that want to modify their trucks. They did tell me that Ford is working on a patch to change the “Start/Stop” to a constant stop for owners if they want. But who knows how long before a patch is released. Thanks for your info! Keep up the good work!

@@BigTv8power well technically speaking they have to prove any modification you perform was the direct result of the failure of the warrantied* part to not cover it. But goodluck!!

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VeDZPgYjUdY.html Getting the license starts at 11:25

WickedF150 thank you for the helpful information, I was able to add the trailer control setting and now I am trying to go to the spreadsheet that you are showing at @9:58 but it seems that I am missing a step or the video cuts off for a second

@@frankperez166 the link for the spreadsheet is in the description