How to make a spinner ring - (2 Different Styles)

Подписаться 154 тыс.

Просмотров 80 тыс.

50% 1

In this video I will be showing you how to make spinner rings using just some copper and brass but it could also be done in silver and gold. If you have any questions about the spinner rings feel free to leave a comment and I will get back to you asap.
Here are the metals I use and where to get order them online. 😀
Wire:
16Ga Copper wire - amzn.to/2sQsTTH
16Ga Brass wire - amzn.to/2JA3PuC
12Ga Brass wire - amzn.to/2sH77Tl
12Ga Copper wire - amzn.to/2M8LtiE
Sheet Metal:
22Ga Brass sheet metal - amzn.to/2sMRuIY
22Ga Brass sheet metal - amzn.to/2JvSwk5
How to make a silver & mixed metal ring video - • How to make a gorgeous...
Other than this "How to make a spinner ring " video I have a growing selection of other videos with new tutorial videos coming out every week. Subscribe to my channel so you will be updated whenever a new video goes live!
#jewelrytutorial #DIY #beginnerjewelrymaking #spinnerrings #spinnerring
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that and I'm updating all the time so bookmark it to stay up to date:
GomeowCreations.com/tools-and...
GomeowCreations.com/partners-...
If you buy any of the tools or materials from my list I will make a small commission at no extra charge to you and it helps support the channel
----------------------------------------------------------------------------------------------------------
If you would like to directly support the channel you can do so in a few different ways.
1. Like, comment and share my videos
2. You can make a one time donation via Paypal of any amount www.paypal.me/gomeowcreations
3. You can sign up a monthly donation via my patreon for as little as $1 per month / gomeowcreations
4. Just watching my videos helps out too and I'm happy to see that I have been able to help some may people get into jewelry making.

Опубликовано:

25 май 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 84

@GomeowCreations 6 лет назад

This video was re-uploaded due to me messing up the sound levels, sorry about that and I hope you enjoy the video. 😅

@ElGatoLoco698 6 лет назад

I mentioned a problem I was having in the comments of your last video about soldering. You answered it in this video. I tried your advice today and you were spot on. I made four rings today and beat the hell out of them on the mandrel and not one solder joint cracked. You are the man. Thanks.

@GomeowCreations 6 лет назад

Hey, I'm happy to hear that it fixed your problem. If you have any other questions feel free to ask or if you have suggestions for future videos I'm always looking for ideas. My next video will be on picking and I should have it up sometime this week.

@ElGatoLoco698 6 лет назад

That's great. I need pickle help too. No specific questions, just general advice. I"ve been doing mostly electroplating/electroforming so clean metal is extra important. Nothing like having a nice piece of jewelery flaking off bits because of bad pickle or oxidized metal or both. Looking forward to you next video.

@lexisdibbs7186 4 года назад

5:55 that terrifying moment when u cant get the ring off and ur life flashes before your eyes Lmao.

@GomeowCreations 4 года назад

Haha you that is very true. 😅

@stormyeffects4795 3 года назад

The best way I have found to get a struck ring off is to twist it off gently with even force. Make sure you look at how the soft tissues of the finger are moving in order to see where the snag (stuck spot) is. You can also add oil or soap to get it off, and I’ve seen people use a string method or cut it off too. Just don’t wait! If a ring is stuck, get it off as soon as possible without panicking.

@nicolecrystal6765 2 года назад

liquid soap or vegetable oil

@Dharlanna 6 лет назад

So cool to see your take on how to make these rings. I've made both types and did mine a little differently and it was really nice to see some tips here. Thank you Randy!

@davidw3791 6 месяцев назад

great vid nice explanation!

@edmelzark1069 Год назад

Really like the spinner ring !!!! Great job and Ideas Ed

@HOPEbus 3 года назад

That was a very cool video. I love spinner rings . Thanks for sharing

@dominicgreen7617 6 лет назад

Thanks this is great for a long time I've been trying to get some basic on making spin rings

@GomeowCreations 6 лет назад

Thanks for watching it and I'm happy to hear that is helped. 😄👍

@LeeOfBent 6 лет назад

Great tutorial! Thanks for sharing it!

@GomeowCreations 6 лет назад

Thanks and no problem. :)

@earthmothercare13 Год назад

Wow those are beautiful! Thank you for sharing 😻

@GomeowCreations Год назад

Thanks and no problem 😁👍

@argentummoonjewellery3503 6 лет назад

Interesting, nice pieces and nice ring. Thanks.

@GomeowCreations 6 лет назад

Thank you 😀👍

@kristibbradshaw 3 месяца назад

Very nice!!!!

@dawnsaffel2620 2 года назад

Thank you so much for your video. I'm going to be making some rings and I've been looking for a video to answer some of my questions. And you did.

@GomeowCreations 2 года назад

😁👍

@manuelcamacho1392 4 года назад

Excelent work. Thank you for the video 👍

@GomeowCreations 4 года назад

No problem and thanks for watching 😊

@lisajarvis3820 3 года назад

Would love to see you make one of these using a Abalone Veneer ring that moves on top!

@esliet 5 лет назад

Awesome video. Want to make these soon.

@GomeowCreations 5 лет назад

Thank you. When you do I would like to see them. 😄👍

@nicolecrystal6765 2 года назад

Hi ! I just want to make round copper wire simple rings, Id like to use silver lead free solder stics, but what kind of propane (only) torch should I use ?? THank you love ur vids Can I snip solder stick into little pieces or should i buy solder bits?

@painenpanic3786 2 года назад

I'm going to have to try this, now to see if I know anyone with tools otherwise it's going to be a very expensive one time project

@peucenon Год назад

Thanks for the great video. Wondering why you leave it in the tumbler for 10- 12 hours?

@GomeowCreations Год назад

The longer you leave it in the more work the media in the tumbler can do. It will smooth stuff out and start rounding some hard edges and give it a nice shine as well.

@gewelryamator4252 3 года назад

Очень профессионально !

@alexandrevlaemynck9432 2 года назад

hi, thank you ;)

@GomeowCreations 2 года назад

No problem 😊

@silenttraveler2710 6 лет назад

*Awesomeness*

@GomeowCreations 6 лет назад

😀👍

@luciakaur 4 года назад

love it

@GomeowCreations 4 года назад

Thank you 😁

@AnyaMRocha 4 года назад

I'm sorry this is a stupid question... When putting metal on the mandrel, is it measured by the ring's bottom touching the line (ie. Size 8) of the correct measurement? Or is it the top of the ring that needs to be on the size line? I hope that makes sense to you. Oh and looking at the larger ring, all I can picture is the webbing between your fingers all cut up.

@infledermaus 5 лет назад

How do you price your work? Materials are obvious, but what do you charge for your time, and what percentage do you mark up? I worked for Zale's years ago and we marked up 2.5 times. That would be helpful. Maybe a video about that or shorter would just be to respond here. However, it would be cool to watch you make something and see how you determine material costs, your time, and ultimately what you would like to get for a piece of work, what the total of your time and materials, overhead, etc., total up to. Is that something you can show us?

@eddycheung4693 2 месяца назад

Hello, a bit late for question haha but what is the bit you used on rotary at 19:00 minute? Cheers!

@dr.carmencaltagirone5868 3 года назад

I don’t have a good domain tools dooming punches. Instead of buying a whole Dapping set again, I would like to buy individual dabbing tools or punches. I know that the size of the tool is different for different size rings. But, can you tell me a range of sizes, about 3 or 4, that I can buy that would work for flaring out the spinner ring.

@GomeowCreations 3 года назад

By the door that I show in this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5EdXcZEhXtk.html this is all that you will ever need for this kind of spinner ring. The link is in the description of that video 😁👍

@argentummoonjewellery3503 5 лет назад

Do you use brass with 15% zinc and 85% copper? (Under the trade name “NuGold”) it has a redder, richer yellow than cartridge brass with 70% copper and 30% Zinc.

@GomeowCreations 5 лет назад

I'm using yellow brass so 60%-70% copper.

@argentummoonjewellery3503 5 лет назад

Thanks

@TheWind213 3 года назад

Very nice, but it you are using brass and copper wouldn't it leave a greenish tarnish on your finger?

@GomeowCreations 3 года назад

Yeah it would. You can use a clear coat to seal it, gold or silver plate the metal or you can make these using silver or gold using the same techniques. 😁👍

@infledermaus 5 лет назад

Gotta try this. Copper first, then silver.

@GomeowCreations 5 лет назад

I always practice with copper first.

@infledermaus 5 лет назад

@@GomeowCreations Bought a big fat sheet of 18ga copper just for that purpose! ;-) having just returned to smithing after 30+ years away, I've buggered a few bits of silver, but got some great pieces out of water casting with the scrap.

@infledermaus 5 лет назад

@@GomeowCreations If you ever get up this way (North Bay SF) holler. I'd like to meet you.

@GomeowCreations 5 лет назад

Well I do live in Southern California but I have never been to San Francisco.

@infledermaus 5 лет назад

@@GomeowCreations It's cooling off. Better hurry! Near the coast the temp drops like a rock after the sun goes down.

@mauricioDS6514 2 года назад

is there a cheaper alternative to soldering? I tried using a soldering iron to join pieces but it doesn't look good

@GomeowCreations 2 года назад

Soldering irons are only for soldering electronics, burning wood and making stained glass. You can get set up for soldering metals for $25-$50 using a plumbers torch. Check out this video I make all about this. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-r8nU0ZMZGFA.html

@mauricioDS6514 2 года назад

@@GomeowCreations thanks sm

@JessE-vk8dh 6 лет назад

Where do you buy your metals?

@GomeowCreations 6 лет назад

Sorry for the late reply. Wire: 16Ga Copper wire - amzn.to/2sQsTTH 16Ga Brass wire - amzn.to/2JA3PuC 12Ga Brass wire - amzn.to/2sH77Tl Sheet Metal: 22Ga Brass sheet metal - amzn.to/2sMRuIY 22Ga Brass sheet metal - amzn.to/2JvSwk5

@DjDustiSam Год назад

Can you make a ratchet spinner ring?

@RabeccaPrimeau 2 года назад

What touch are you using? and Product to pickle? Where to buy

@GomeowCreations 2 года назад

This is the torch I use - amzn.to/3zlHQ20 This is the pickle I was using - amzn.to/3JCTfzf This is the pickle that I use now - bit.ly/SmartPickle

@luigiesposito7385 4 года назад

hi thanks for your videos. how can I tighten a silver ring with stone without taking it off

@GomeowCreations 4 года назад

What do you mean?

@lindawallace6750 7 месяцев назад

Do you sell your rings ??

@erizabesu87 Год назад

💙💙💙💙💙💙💙💙💙💙💙💙💙

@GomeowCreations Год назад

😁

@isjon777 5 лет назад

is there an equasion that will tell you how much it will weigh?

@GomeowCreations 5 лет назад

I'm sure there is but I don't know of one or use one 😁

@DriverDown.... Год назад

What is pickling?

@GomeowCreations Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1mPAXsKXb1Q.html

@crazy4beading 6 лет назад

can you share what gauge metals and wires you used? thanks

@GomeowCreations 6 лет назад

I used 16 ga copper wire along with 16ga and 12 ga brass wire. I think the sheet metal was 22 ga.

@crazy4beading 6 лет назад

GomeowCreations thanks so much. I really enjoy your videos.

@GomeowCreations 6 лет назад

No problem, I really need to add that info into my videos, I just keep forgetting to haha. I'm happy to hear that you enjoy my videos. 😀

@stormyeffects4795 3 года назад

I want. I make.

@infledermaus 5 лет назад

I ran onto this by accident and given your unusual ring creations, I thought you might get a kick out of it. If you make a ring from this, whatever it is - it looks beyond my skill level so I didn't watch it, you have to film it for us, okay? Radioactive Tritium (??) and Damascus (??) ring ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ublt-4GkVoA.html Of course, if this stuff would make your finger turn green and red and fall off, never mind! Lol!

@roverman985 4 года назад

I bet that flared ring is un comfortable to wear.

@GomeowCreations 4 года назад

It would depend on the spacing on your fingers

@roverman985 4 года назад

@@GomeowCreations human hands are basically all the same. Noone is going to have their fingers constantly spread apart. The flared ends of ring is going to dig into the fingers on either side of ring. Only finger it wouldn't do that is the thumb. Flared out ends is just a bad design.