How to Setup Jumper T16 Pro with Spektrum Receiver BNF Airplane 

Thanks guys! Just got a Jumper, mainly for my quads, but I also have a bunch of spektrum based planes and helis and wasn't quite sure how to set those up. Problem solved. You guys have some great tutorials - keep it up!

THANK YOU! Finally someone that takes the time to explain T16 to beginners! I have Spektrum stuff but bought a T16 and could not understand how to use it was about to sell it for $40 cause there was no book and most online stuff was way over my head as a beginner. I appreciate y’all’s great service when buying and shipping is a whole lot better than those “big” guys store. Much rather support a “local” hobby store, I wish we had one here in North Louisiana. Thanks again

Thank you both so much. I’ve been flying for years but I still find all of your tutorial videos super helpful and informative!

Thanks for this great informative video. I was going crazy trying to setup an Admiral/DSM receiver. Your video helped me out tremendously. Keep up the awesome work and I would love to see even more Jumper T16 videos! 👍👍👍👍

THANK YOU GUYS SOOO MUCH ! I have been trying to figure this out for at least two months now! Can't say it enough thanks for listening 🙂

Thanks so much guys been using spektrum for years,just got a t12 pro and was having trouble setting up this has helped a lot.

Finally! Thank you guys soo much! Liked and subbed! Ive almost gave up on this transmitter.

I got the jumper T16 off of you all and now you showed me how to set up my sportclub s you guys are the best thanks guys#

You guys are great! Thanks for the quick and informative vid.

I have the Jumper T-16 Version 2 which does have the internal RF so I did have to turn that ON for the transmitter to communicate to my Sport Cub S.

Hey guys, great videos! I use my Jumper T16 with a Zohd Orbit Neon, Mini AR Wing, AR Wing, Hobbyzone AeroScout. Pretty soon will be flying the Avios Mig 17 and Hobby King Vampire. I love the screen and functions of the Jumper T16 and prefer to use it over my DX6.

Thanks !! As always, very helpful!

I did it, and I’m happy to be subscribed to your channel. Great videos by the way!

I wish you guys had a store here in New York. You guys rock. 👍👍👍👍👍

I'll be setting up my Opterra 2m . Need to figure out elevons, but this was a great start. Thanks guys.

Awesome info like always, thank you.

This is for the old T16 without the internal RF board! You must select the internal board with the latest T16.

Awesome info! Thanks for the video!

Thanks for sharing this video!

very useful for an old blade 180qx.on now a jumper T16. cheers guys

Awesome video! Please do one for the UMX Timber, showing the flaps, as3x and safe modes setup, low, mid, high rates switch etc.

Thank you guys so much for this video.

Gday Will & Basil, nice job guys love that t16 transmitter.👍🛸

Thanks for the video 👍

This was needed. Thanks Fella's

Wish we had a hobby shop like y’all’s around here. Nice

Thanks dude, this helped me A LOT!!! :-)

Very helpful!

Must say this is first class video keep em coming especially if you can do one on Eflite apprentice thanks from uk

Good video. Thank you!

Great tutorial ,because most my planes are spektrum!!!: )

I just figured what I did wrong. I get the same screens now. Thank you.

Thanks guys!

THUMBS UP another awesome video , and I fly over 30 models of various manufacturers ....never thought about the Jumper for planes, only used the original Jumper for my micro quads , use Spektrum DX9 in all my planes btw...at some point I assume that Jumper T16 will be a future purchase..But next I got to have a better set of FPV Goggles

Keep those Jumper videos coming guys!

Looks like Jumper is a winner with the T-16 Pro. My objection is the Open TX OS. I have a QX7, and it too is a very nice radio. It also runs Open TX. Yes, it's possible to do almost anything with this OS but not quickly. And it's certainly not easy to do at the field. After one season I bailed and went back to my trusty DX8.

This is an awesome video. 1st one over seen. Can you please do a similar video for the JumperTX 8? Subscribed!

Cool video thank u I want the multiprotocol board from u guys

Greatly helpful video, gents! I'm trying to get this exact setup working: Cub S and T16 on most recent firmware. Channel 5 on three position switch ends up with panic mode where I think experienced would be as well as on channel 6 if I set it up for panic. Since I don't trust SAFE mode, I'd like to have the option to turn it off. I know it's in there somewhere! Thanks!

Hey Guys, Clean1 again. I figured out my Umx Timber binding to the Jumper T16Pro problem. This doesn't align with your instructions for the Sport Cub S, because when I followed your video @4:30 min in, you shut off internal, and went with external module. That did not work for my Timber. Only after I went back and tried the internal module, did the Timber come to life! Thanks for everything else though, it got me going in the right direction. It was a 50/50 chance, so it was worth doing, Whoo hoo! FLAPS, here we come! I will also have my Sport Cub S back together this week also, and will bind it to the jumper T16.

I'm having a hard time with the inductrix brushless and will be doing the Timber x

Great, thanks. Can you do a video with Jumper Pro, bind to horizon cub 1.3 rtf? There are some gps things to cover. Maybe it's not even possible to control this plane with Jumper pro. Here's hoping for another rainy day in Atlanta.

Thanks for all the great content guys. Learning tons from your videos. I have purchased Jumper Rx's from you and the LiPo battery for the T16 as well as the USB C charging upgrade. I cannot get my T16 to work the throttle on my Spektrum Rx's however. I can bind to DSMX or DSM2 just fine, but throttles just don't work. Any ideas?

Thanks great video. Can you guys do a video setting a Blade 230 S heli with SAFE mode?

Hi! Thanks for this video. Have you a video to bind an carbon cup s2 with this transmitter?

Great video! Do you know how I can also program in the rates and arm/ disarm switches that are on a Spektrum tx?

Great video sir's could you tell me if this would similarly work for the jumper t8sg plus or is it different again, thankyou, regards, Alan, UK.

Great info! love your videos. was finally able to bind my jumper t16 to a little eflite vapor. It works! Only annoying thing is i'm getting constant telemetry low or critical messages. Any ideas? There's not tuning for no frsky receivers I guess?

Great video... I need some help getting my AeroSport BNF setup on my Taranis X9D+ with a Jumper module as the external radio.

Hi Grayson Hobby! Thank you so much for your videos!! I'm a super newbie into flying quads and would like to find out how to use third party radio, such as my Jumper T16 Pro, with the DJI FPV system. I know it can be done but no matter how hard I try, I can't seem to find a tutorial to do that. Can you guys do one for that? And also how to connect the receiver to the system! Thanks!

Hey guys, thanks for your videos... Can you tell me what settings for the T12 and a beta flight lite? I'm new it's my first radio and whoop. Ty been looking everywhere 🤦

Thank you

Just picked up a jumper t16 pro v2. I went through the process with the setting it up as outlined; however, as stated by another person, the internal needs to be set the way you noted on the external for new radios. Also...something with the software has changed because setting up this plane as noted in the video mixes up the throttle and elevator. I can't figure out how to take the prop off of this so someone else has to hold it safely, but the AETR on mine (5/2020) is ATER. Update: If people are having any of the same problems I was having, the answer for me was in a few areas. 1 - On Jumper t16 pro v2 - it has the internal, so as stated by other comments below, turn on internal and make sure external is off, otherwise it won't bind (the opposite of what's in the video). In terms of the other problems, they were all caused because I tried to update the jumper to the most updated version before I tried setting up the plane. The new version included changes to the channel mapping rather than the setup shown on this video, that's why the elevator and throttle was switched when I completed the binding. I had saved a copy of the original default firmware that came with my jumper (dated 1/2020) and so I deleted the updated version and copied the original back. I then reprogrammed the model based on the video, also using the internal and everything then matched Grayson's instructions. If you ever update the firmware, the channel mapping will change and AETR will be incorrect and watch out for the prop. Thanks guys! Great, helpful content!

Followed your tutorial for a T12 and worked out well, thanks. Am I missing something or does one have to re-enter setup every time you power off/on the radio to re-bind to the plane. With the couple of tinywhoops I've played with on that radio it just re-acquires every time I turn on. Can you set a shortcut switch on these radios to bypass the screen for that?

can you show how to set up the jumper with the spectrum AS3X and safe select

Battling with an indoor brushed all in one FC ( spektrum) get the AETR and no switch auxiliary on receiver tab. Help would be great thanks 🙃

Please do a setup video on the mini convergence with the Jumper T16 pro. It`s driving me nuts trying to figure it out, thanks.

I have the jumper t16 pro 2020 and want to know if this same set up will work for quads and spectrum rx? My yaw & roll are on the wrong channels. Thanks!

Do you have to change the wiring on the receiver? I am getting ready to bind my carbon cub to the jumper t16 . If you are changing channels seems that you would have to change the wiring

Good job Guys! I happen to have a Sport cub S, which died when I got water inside while flying with floats. But my question is, I also have a UMX timber, which I tried to bind following our video on the Cub S. I've actually only been able to fly the timber its the transmitter from the Sport Cub, so I haven't got to use flaps yet. I got the latest updated JumperT16 like in your video, but can't get the Timber to bind. I've tried both X 22, and X 11ms with no results. Any chance you guys could bind a Timber with flaps? Any ideas what might be wrong. I watched video 5 times, and of;;owed step by step. Thanks for all the informative videos. I've flown my ET115 which I bought from you guys after your video came out on the V3 model. I actually fly it smoother with the JumperT16, than with the Taranis Q7x I had. I didn't think the hall gimbals would make that much difference!. Anyway, great videos on the JumperT16!

Any way of getting an external module to see if I can get my plane flying?

Please let people know that If you plug servos into a Spektrum Receiver the RX channels are STILL TAER . The radio auto selects the proper channel routing. AETR in the radio converts to TAER on the RX.

I originally bought the T16 to use with quads as the multi -protocol allows me to buy a bind and fly regardless of the receiver. Sometimes trying to fit a spectrum on some little quads is quite challenging. I am now using the T16 for airplanes as well but I found with my E-Flite P51D 1.2M BNF that the range was significantly reduced. I am told that Spektrum frequencies may be a little off and that there is something you can do on the T16 to correct it. Do you know what the issue is?

I'm trying to figure out how to bind this to an xk a800, any tips or know how?

How do you guys do safe select on a plane like the night timber??, on this plane you have to hold the sticks in and down then move a switch 5 times to assign it as safe select, I have tried a lot of stuff and nothing works, I think the issue here maybe different frequency on the endpoints between the t16 and the original Spectrum TX, I'm thinking the receiver is not reading a proper endpoints so it is not going in into the programing of the switch for safe. I'm not sure what is going on.

Would the process be the same for the horizon hobby Valiant? It doesn't have the panic switch but I would like a switch that controls as3x technology for on/off... pls help

how do u bind the inductrix pro. i tried the instructions on the video.

hey can we use trainer link with spektrum transmitter using jumper t16?

I've got a Taranis QX7 with a multi-protocol module. Everything works except the SAFE switch on channel 5 and the panic switch on channel 6.

Does Spektrum AS3X on OpenTX require a different stick travel range? Or stick with stock Jumper range?

You need a channel for throttle cut. It would be nice to see more BNF setups including control mixes.

Can you transfer models from a Spektrum DX2 Gen2 to the Jumper T16?

can you show the procedure of how to bind the Jumper T16 with spektrum ar7000 and ar6100 receivers please . My Jumper T16 failed to bind with it. Thanks !

Do you think this would work on the xk x420?I have heard it’s the s-fhss protocol???

If throttle is ch 3 on the radio and ch 1 on the Rx how do they map bearing in mind failsafe on a Spectrum Rx only works on ch1?

Can I set up a spektrum model and use the usb dongle for simulators?

i would love to see a video on a jumper ts18 with a spektrum inductrix bl

Hi there. I have the super cub which has safe mode and rescue mode etc right. The problem im having is the control has a arm/disarm switch on it and i cant seem to get the motor running at all..i have rudder and elevater working but cant figure how to arm the motor..please help..from a frustrated flyer.

i have a umx carbon cub ss i can not get it to work with my t16 i tried what u just did and it dont work works great with my blade heli tx but i cant get it to work with the jumper t16

Hey gents! Will this bind process and set up of Safe and Panic mode be the same for Spektrum AR636b? CA Jim

I'd like to see you setup Opentx on a Blade Fusion 270

Thanks for your instruction Video. I tried to bind and followed your Step by Step instruction, but can't bind T18 to any of my Spektrum Receivers... it's annoying.

how about setting up an opterra with safe?

Hi I just wanted to buy the transmitter but I have a blade 230s v2 and a blade fusion 270 iam not sure if this transmitter will work with the blade helicopter or only with planes can you let me know thanks

The tx does have an internal module if this is the t16pro cuz the only external module is if you add one like crossfire

Show how to bind to the e flite f15 please.

I have bought a new Spektrum DX8 and wanted to buddy box him with another transmitter. I already own a Jumper T16 so, my question is, would it be possible to bind the T16 as a slave to the DX8 for wireless buddy? Not been able to find any info so it’s either not possible or no one had done a video on it yet.... 😉

I am trying to bind a Turbo Timber and set up safe select on a 3 way switch and panic switch on a momentary switch on a JumperT16 pro help please.

trying to bind up a eflite havoc with safe select. can i please get help

my local hobby shop told me that if i bought the rm tx16s or jumpter t16 transmitter it wont bind in a receiver that has as3x and safe technology and if it did it wont be functional is that correct? or was he just trying to upsell me on buying a spektrum transmitter. please help

Hi guys, will the jumper bind with hitec

Is this the same way to bind the t18 pro to spektrum

It the binding process the same for the areoscout. I want to be able to use safe as I am a new pilot

Great video, have you tried to setup the T16 with the X-vert?

I never was able to get my multimodule to work properly with my F27. The AS3X setup stuff was confusing, so I eventually gave up and flew it with my JR 11X. maybe its time to try it again! also you spelled “Aileron" incorrectly ;)

With the new lineup from Eflite having telemetry supported ESC's, does the Multi module also support DSMX telemetry?

but how do you know the three modes and panic switch are working? I see no difference happening , no matter where i put the 3 way switch. Or no definate difference when i pull the panic switch

Good video! Really like tutorials like this. How about setting up a blade 230s v2 helicopter tutorial?

eflite umx ultrix im having trouble binding my t16 with this plane

I was so excited I found this video I have exact plane and Tx but I can’t get it to work it binds then the control surfaces just go crazy and the jumper keeps saying telemetry lost telemetry recovered over and over any idea what’s up. It binds to the Tx it came with but it’s mode 1 and I’m mode 2 😩😩