Master Cylinder Replacement - Dropped Clutch Repair

Подписаться 130 тыс.

Просмотров 275 тыс.

50% 1

In this video I show you how to Remove your clutch pedal and replace your master cylinder in simple easy steps. The symptoms of this problem is a dropped clutch and no gear engagement. Prior to complete failure the clutch may drop to the ground with no return, to which you can lift it with your foot to re-engage. These are the first signs to inevitable failure.
Make sure to hit that like button, subscribe and hit the notification bell
Hope this video will be very helpful and informative to you.
Thank you so much for being with us...
⏰Video Duration 11:26
Product details:
For USA
Underseal Spray: amzn.to/2Qrs7wp
Drill Wire Brush: amzn.to/3wgRO1I
Degreaser: amzn.to/3fiZZ6Q
---------------------------------------------------------------------------------------------------
UK
Socket Set kit : amzn.to/3i4cNB8
Car Jack : https ://amzn.to/3fumvv3
Safety Glasses : amzn.to/3p0Ggxp
Axle stands amzn.to/3fsowYr
Nitrile Gloves : amzn.to/3fupN18
Tourque Wrench : amzn.to/3p3GiV9
Dewalt Impact Wrench : amzn.to/2ToJM98
Electric Ratchet : amzn.to/2S6Lcmu
---------------------------------------------------------------------------------------------------
USA
Socket Set kit : amzn.to/3fSIOJJ
Car Jack : https : amzn.to/3c19Rlb
Safety Glasses : amzn.to/3fQY75Q
Axle stands : amzn.to/2TkUwVP
Nitrile Gloves : amzn.to/3i031zX
Torque Wrench : amzn.to/3oXugwH
Dewalt Impact Wrench : amzn.to/2SD39L2
Electric Ratchet : amzn.to/3fNDdEy
.......................................................................................................................................
.......................................................................................................................................
ツ HOPE YOU GUYS ENJOY THIS VIDEO!
👉If you enjoy this video, Please like and share it.
👉 Don't forget to subscribe to this channel & press the bell 🔔 for more updates.
👉 Subscribe now! rb.gy/h4puuz
Don't forget to tell me your opinion in the comments below.
.....................................................................................................................

Авто/Мото

Опубликовано:

2 авг 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 119

@BMACVAGS Год назад

Feel free to buy me a coffee ☕ If the video helped you out www.buymeacoffee.com/bmacvags

@chrismcgowan5180 2 года назад

Did this job not so long ago. I was getting super annoyed as is, can't imagine the stress of filming with exceptional light quality and angle given the space. Mad props to you, made it look easy.

@BMACVAGS 2 года назад

thank you so much man, I appreciate that. The angles were super tough, I just hoped it showed the job well enough

@obviouslytwo4u Год назад

You might need a joint to calm yourself bro

@chrismcgowan5180 Год назад

@@obviouslytwo4u isn't that illegal?

@senseihai6699 Год назад

i did the same , last year but was a 2.0 tdi and has more room to work on the engine bay , anyway the difficult part it’s fitting back the plastic clip !!!

@Ionutscanning Год назад

How much another cylinder cost? Or how much everything cost you?

@dennissmelly9599 Месяц назад

I followed your advice step by step and everything went smoothly. Thanks, top video.

@jimmyaaron1710 2 года назад

Please do a reinstall video. Bleeding brakes and stuff. Love your content bro. Your really helping

@jamaicantreasures1740 9 месяцев назад

This was the best video for me. The steps match what I faced for the VW Eos 2007. Not all the steps are able to be photographed as the bolts are hidden away from view but the dialog is very helpful. It was tricky to get to those bolts but with perserverance we got there. The whole job took me 3 hours as it was my first time. There are other similar videos herein but this one was the best for us and solved the problem. Thank you!

@timothyhicks5843 27 дней назад

Thank you, there are such tight spaces to work in that I nearly threw the towel in. Your video helped hugely in terms of detail and motivational support!

@sliam2000 Год назад

Very solid man, straight forward, and to the point appreciate it!

@VictorGarcia-it8gc Год назад

Wow thank you so much for this. I can’t believe a detailed video about this actually exists.

@normanbooysen4022 3 месяца назад

Thank you so much. You just bailed me out! I was stuck but you guided me out of that forest. It was not necessary for me to make mistakes. Great video. Keep it up! You deserve a lot of coffee, bro.

@alanburman549 2 года назад

Brilliant video.. Half way through it now... Well explained and great advice with creating space! Thankyou👍😊

@jeremysky7708 2 года назад

Thank u so much! I was having issues this was more informative even tho I'm working on a rusty 07 Jetta NY car that traveled from NY to CA lol now wait for Ebay. Respect

@dickyyrrep1383 2 года назад

You could have been a Surgeon mate !! Great job done.

@HeinAN 2 года назад

Glad to see your still making videos! Will you be starting a vw touran series like you have done with mk4 golf? Used to love watching them as you made alot of «unusual» videos showing many of the bugs and common fixes for these cars that is hard to find anywhere else :-) keep it up!😀

@e15pud 2 года назад

Excellent video. Thanks!

@Jordan-xi2fs 2 месяца назад

Saved me about £250 thanks so much for making this video

@lazymandoplayer 2 года назад

Really helpful video, I have an EOS that I have to do this on but thankfully the engine bay has much more space.

@justynpoppitt5987 11 месяцев назад

Just swapped out the clutch matser cylinder on my VW Touran cause all local garages were booked up for 2-3 weeks, great video just saved me 2 weeks & approx £170 theres a coffe on its way buddy

@silviu788 Год назад

bro you worked a lot and filming and showing pretty all of what it's included into this operation. Thank you very much.

@BMACVAGS Год назад

Thank you for appreciating the effort

@banksiasong Год назад

Incredible skills. Thank you.

@onyxaries Год назад

Bro mine just gave out was gona do it myself but after watching this and many other vids getting the shop to do mine to much stress this job 😂 props to you bro

@lizziejaynestevens Год назад

I'm a newbie, but this video was ACE!! Subscribed and hit the bell...looking forward to seeing more from you!

@BMACVAGS Год назад

Welcome aboard!

@anocaesar1975 2 года назад

Good day BMAC FIRSTLY THANKS FOR THE DOPE CONTENT 🇿🇦

@Airzism 2 года назад

Nuff luv B thanks bro 👊🏾

@seanspringett2914 2 года назад

Very good tutorial, thanks

@Mike_5 11 месяцев назад

Perfect expert skills to replace these rubbish plastic Master Clutch valves (They break on LOTS of Seat/VW/Audi/Skoda cars!) and lot's of good tips to make the repair go nice and smooth

@anthonygaunt8974 2 года назад

Well done lad🤗

@abderrahmanegouasmi7556 2 года назад

Good job. Thank you 🙏

@gordonglenn2793 9 месяцев назад

Great vid. Informative

@FSHooligan Год назад

Also, very good video, especially considering how tight everything is 👌

@kirkh9641 2 года назад

Top job man

@rdown11 2 года назад

Great Video! you know your stuff. I enjoy your tutorial on VW

@BMACVAGS 2 года назад

Thank you, I appreciate that.

@philip.aocallaghan4602 2 года назад

Great video.. thank you for to the trouble

@Choc-Ice 5 месяцев назад

Fair play to ya mate. That's like a surgeon replacing someone's heart while they're head is in the other room, letting their hands do the work. 😂

@mkhonzalucky2400 Год назад

Tnx bra it's helpful

@BoofYou 2 года назад

Thanks good video. For bleeding the clutch i recommend using a small oil can pump with brake fluid and pumping in from the bleeder valve. Worked like a charm and pushes out the air our the reservoir as you fill the system. Make sure you have the clutch pedal pulled out. Works like a charm.

@ThanhBui1 Год назад

That makes sense. I know some will take a long time to bleed, this way is more effective, thanks for the tip

@jamaicantreasures1740 9 месяцев назад

This is a great idea. I had trouble priming the master cylinder. This simple idea is brilliant. Next time!

@keithgribble8143 Год назад

Great instructional video bud. Whenever I do something with the chance of a lost nut as in your video I attach a strong magnet to the extension it hold the nut or bolt magnetically into it. If that makes sense.

@tonymorse4573 Год назад

Hay Bro, looking for some advice, i've watched a few of your videos on the mk4 golfs, great videos, easy to understand and follow, i have a clicking noise on my Audi A3 2.0 8v 2016, got my mk4 golf sold Friday, sad to see it go, but had to change car for the CAZ in Bristol.. thanks

@enlightenednews5265 Год назад

Good video

@user-vo4yh4ed9n 4 месяца назад

top class

@go8no1 4 месяца назад

Getting ready to do a clutch master cylinder in a 2007 Rabbit mk5. Do you know if its the same?

@britishbatman8598 2 года назад

This guy does this in great detail but is there any videos on this with a 1.8t engine like s3 8l , mk4 golf or leon cupra r ect cause wrong car for me😫

@katarinaespwall8542 11 дней назад

Great video.shame it's not for my car🤣🤣.I can't seem to find much on MK2 Volvo v70? Hopefully some of this vid might help??Cheers😁

@FSHooligan Год назад

Is it perhaps a bit more accessible from underneath the car? Mines starting to stick occasionally, and I do have access to a hoist 🤷🏻‍♂️

@ITZMitchYT Год назад

Is the slave cylinder on a 2012 1.6 tdi touran on the outside or inside of the gearbox? Its a 6speed transmission

@etterbakk 2 года назад

i have what seems a working mastercylinder on the mk4 only the end of the rod little ball joint has released out the white clip. what should i do? greets

@valentin-mirceabala4704 2 года назад

super

@guitaroidman524 2 года назад

I have just replaced the master and slave cylinders in my caddy, but the hydraulic line is not sealing on the new parts. Genuine VW parts with brand new seals. Do you have any clue as to why it is doing this?

@smokeyboro 2 года назад

HEY BOSS I LOVED YOUR VIDEOS SO INFORMATIVE AND YOU ARE GREAT TO WATCH PLEASE DON'T STOP THE CONTENT THANKS ALWAYS

@BMACVAGS 2 года назад

Thank you so much. I trully appreciate that comment

@Diego2011ism Год назад

Tks

@fuhrerfury3622 2 года назад

hey there , may you show me a video of 1998 Audi a4 steering wheel rack removal please? thank you so much .

@avinashbhat7403 Год назад

Thanks for the video. I also have this metal rod holding me back from removing the clutch pedal. But having very hard time to remove this metal rod, because it is way hard in my model to access its screw (vw golf 6 1.2tsi). Screws of the rods are restricted from access as it’s next to the electric sensors or something and did anybody had same problem and resolved it?

@clarestephanie5557 Месяц назад

Has the peddle got to come out to do this or will the cylinder come off from the engine side?

@matteobenedettino9021 Год назад

@BMACVAGS how many working hours for this repair?

@mathewwade1415 2 года назад

My golf Mark 5 lost all gears. The pedal isn't to the floor and the gear linkages and clutch were replaced 8 months ago. I can get the car Into Gear with the engine off and have to change gear without the clutch to limp it home. Any ideas

@Gandeloft 7 месяцев назад

I haven't yet tried, but in case someone feels like answering and knows the answer.. Is this video's process applicable for my 2008 Volvo C30 1.6D?

@RumelM 2 года назад

Just a suggestion, the white t-shirt is affecting the white balance. Great video BTW!

@BMACVAGS 2 года назад

Great point, I didn't think of that

@craigbrockwell7199 Год назад

Can u do a bleed video thanks bri

@senzom4484 3 месяца назад

how do you know its broken if you compare a new one nd old one?im scared to buy it cz on my car the brake fluid was full no sign of leak but the clutch pedal was sticking

@williambritcliffe2211 2 года назад

Happened on my PD130 Bora recently

@sm7538 2 года назад

Ah I remember this job I done on mk5 golf was pain in the backside to replace

@BMACVAGS 2 года назад

I didnt enjoy this job

@enlightenednews5265 2 года назад

Now that's better.

@BMACVAGS 2 года назад

Thank you

@alexcovaci24 2 года назад

Hello mate, I have a golf 6 2010 and my clutch pedal dropped sometime and today decided to give a hard time. Just I want to know if you find to be hard to shift gears just before you decide to replace the cylinder. I don’t want to change the whole clutch kit and then to end up changing the cylinder. My flywheel been changed 50k ago. Any info will appreciate! Cheers

@BoofYou 2 года назад

What do you mean gave you a hard time? For me when the master cylinder went out it got very soft and worked a few times and then went out complete where you couldn't change gears at all. If yours dropped but then can back for a while, i guess it's still possible there is a small crack or seal that has gone bad. But it could be another part of your system.

@BabyBlue124 Год назад

I have a 2010 golf 6 1.6 L TDI I just replaced the clutch Kit and flywheel. started it did not start but heard a knock sound Upon further investigation when taking the master cylinder I noticed a crack through it. Should I buy a new master cylinder ?

@alexcovaci24 Год назад

@@BabyBlue124 I had ended up changing the master cylinder first and whole clutch kit at the end. If you notice cracked master cylinder, it worst try as cheap version and could be fix. Mine is 2.0 tdi and slave cylinder is inside the clutch. Have to mention that. Are the most reliable cars I have so worst investment if you want to keep it.

@josemartinez7811 2 года назад

I reused mine. I only changed out the clutch starter switch. But now it won't take pressure. The pedal will not stay up. Any ideas

@DJMac 2 года назад

Great vids. You got a link for the electric ratchet

@BMACVAGS 2 года назад

If you are in the UK: amzn.to/3Ae3LHu

@DJMac 2 года назад

@@BMACVAGS yeah am in Scotland. Thanks. Keep up the good work bro

@marcellosgarbini759 2 года назад

Thank you for taking the time posting your video. Will check if it is the master cylinder as the pedel clicks sometimes under foot. Bites about an inc up. Been told clutch but sespect master cylinder. Any thoughts?

@chrstphrr 2 года назад

Goodness, I thought the master cylinder on my LHD mk4 was a bit of a pain having to work around it's ABS pump, but the RHD access makes it look wide open in comparison.

@BMACVAGS 2 года назад

I was envious when I saw the lhd location

@joead5739 2 года назад

Changed the clutch on bkd and pedal is getting spongy any Ida

@hassanzaman6454 Год назад

What are the symptoms of a bad clutch cylinder?

@seandaly1291 Год назад

Did one on a caddy.. couldn't release wire had to cut it . Was awarded to remove with the wire still attached.. even when I had it remove had to break the wire plug to release it.. nightmare job.. got it done eventually had to rejoin the wire this is not a job for the faint hearted...

@jibcot8541 2 года назад

I did the clutch ok but I dropped the rubber seal from the hose that goes to the brake fluid reservoir 😭 I have spent 2 hours with a touch looking for it but no idea were it has ended up! I cannot even find the exact replacement on ebay 😒..

@alisatchan4885 2 года назад

Do you have the link for it m8

@kylejohnstone2378 2 года назад

Wish I saw this video first 😪

@coolmonkey619 2 года назад

Are you a mechanic full time or just a hobby

@BMACVAGS 2 года назад

I am a jack of all trades, I do pretty much anything to do with cars.

@elbowtoe84 11 месяцев назад

How to bleed ?!!?

@joead5739 2 года назад

I’ve got MK5 2.0tdi on 140k and slowly the pedal started to get stuck down.. last month had new clutch and dmf and every day is getting worse and worse U think it could be master

@HGVCraig Год назад

It’s not a master slave cylinder. That makes no sense. The one on the pedal is the master cylinder, the one in the gearbox is the slave cylinder, because the slave does what the master tells it to do

@grf4005 Год назад

Just replaced this but pedal still drops to the floor :/ any idea?

@BMACVAGS Год назад

Have you bled the system?

@grf4005 Год назад

@@BMACVAGS Yes! That was the problem, low clutch fluid and air in the system. Bled it with a one-way valve and it's all good now. Thanks for the video (Btw it was a nightmare doing it to a 2.0 TDi Passat)

@ivanmihanovic5443 Год назад

@@grf4005ame happened today to me. How did you sort it out? After I installed new cylinder, pedal is still on the floor and has no resistance whatsoever. All seals intact on both hoses, all clipped in etc etc Oil comes out of the slave cylinder on the gearbox and clean stream but pedal is still on the floor.

@grf4005 Год назад

@@ivanmihanovic5443 your slave cylinder/throw out bearing has broken then. Gearbox off job for that though :( new clutch and flywheel too.

@ivanmihanovic5443 Год назад

@@grf4005 it’s b7 passat 1.6 tdi so slave is on top of the gearbox. Will try it first before release bearing