Most Affordable 3 INCH Lift Kit for Jeep Wrangler DIY INSTALL and review | MotoFab Lift

Подписаться 25 тыс.

Просмотров 112 тыс.

50% 1

www.Garagecouple.com
We finally did it! We lifted our Jeep Wrangler JKU 3 inches, and we could not be happier with the way the Motofab kit went in, as well as the new ground clearance for not much coin! We love it! We hope you enjoy this step by step DIY install guide. As you have seen, not all installs go smoothly, but this was the gold standard. Everything dropped right into place. Having done this once, we could do it again in under 3 hours for all 4 corners. Pretty awesome. Anyways, here are some links as promised: Jeep drives like Original, which was huge for us. Don't forget to enter our headlight giveaway! Cheers!
Motofab 3 inch lift kit - amzn.to/32bSdE9
Motofab 2.5 inch lift kit - amzn.to/2VD1S4e
Mechanics tool kit - amzn.to/33rdlGU
Spring compressors - amzn.to/2OIcn4W
Liquid wrench - amzn.to/314XEn2
3.5 ton floor jack - amzn.to/2VAdMvP
3 ton jack stands - amzn.to/2M9pEl9

Авто/Мото

Опубликовано:

11 окт 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 316

@Garagecouple 4 года назад

Support our channel by checking out some of our awesome and recommended JK mods, all links are here: Bright LED headlights - amzn.to/2JR4fNP Smoked LED turn signal - amzn.to/2EQ7X67 Steel Stinger Front bumper - amzn.to/2WjykMA LED tail lights - amzn.to/2JPBL7f Under seat subwoofer - amzn.to/2JOKDK4 Red metal handles - amzn.to/2Wik8U1 Red shifter bezel - amzn.to/2HRZscH JK light bar - amzn.to/2EPEOYH Rock lights - amzn.to/2JPBUHP A piller switch pod - amzn.to/2MoWBw2 Door hinge side step - amzn.to/2ENee2A Trunk mounted table - amzn.to/2EOywbL Door hinge side mirror - amzn.to/31pQs5a

@spartanCody08 4 года назад

Great video! Really helps to see the scale of work it takes to put a lift onto a jeep. The voice over explaining what's going on was helpful as well!

@Garagecouple 4 года назад

Thank you for the comment! Let me know if you have any questions! Cheers 🍻

@nautica1017 Год назад

I have been thinking of getting this, but after watching your installation video and then the review of 1 year later, I was sold. Love the channel you guys explain everything very understandable.

@Garagecouple Год назад

Appreciate your support! Howd yours turn out?

@appathejku5848 4 года назад

For $130 it's a very good lift. My crew and I all run it currently and it's done all of us very well so far.

@Garagecouple 4 года назад

Awesome! I am glad to hear you like it. It's a solid entry level lift!

@Garagecouple 4 года назад

We're in southern California!

@shawnyoung3033 4 года назад

I just had this put on my 17 jk sport. I love it. Did you have to get alignment?

@starkiller6740 4 года назад

How much labor cost u think it would be

@SZeeshanNaqvi Год назад

Can you run 37's with this kit?

@aggrex 4 года назад

Great DIY budget lift video showing a few safety tips like jack stands, tire under the jeep and spring compressor tip etc (except for foot protection). Next look for some sway bar quick disconnects...makes disconnecting super simple when going off-road.

@Garagecouple 4 года назад

Awesome! Thank you for the comment! Will do, again thank you! 🍻

@a13xsalinas7 4 года назад

You guys are amazing very entertaining and keeps me wanting to upgrade my JKU

@Garagecouple 4 года назад

Appreciate the kind words! Right on!

@lalp01 9 месяцев назад

After a few months of getting the kit, and after an engine and transmission breakdown that required both to be changed, I finally installed the kit, following your advise. Worked like a charm. Took me about 6 hours to do the whole thing alone in my garage. I love it. Keep up the great videos. Cheers!!

@Garagecouple 9 месяцев назад

Glad to hear!

@lalp01 9 месяцев назад

@@Garagecouple So, I hear that you are a physician. So am I. I am a hand surgeon in Florida, Wesley Chapel, north of Tampa bay. I love doing things to my cars. My Jeep is my baby. Love your channel.

@Garagecouple 9 месяцев назад

That's cool! I'm an Anesthesiologist.. sharing that same feeling about the jeeps as you! Cheers 🍻

@jallwine 4 года назад

Thank you so much for this video. I was EXTREMELY helpful!

@Garagecouple 4 года назад

Stay tuned for the follow up video, premieres tomorrow at 2pm Pacific

@Sami-rp7mf Год назад

That was great. Not a mechanic or a great handyman so learned quite a bit. But. I'll have to to do this outside. Thanks

@donnstambaugh1506 4 года назад

Love the concept of your channel, great job.,.

@Garagecouple 4 года назад

Love this

@4LowConcepts 4 года назад

Awesome video guys!!

@Garagecouple 4 года назад

Thank you so much!

@daubie3 4 года назад

Hey Guys, Great video. Just a little hint/tip, any time you are changing things with the suspension, it is much much easier if you loosen the control arm bolts and remove 1 bolt from the track bar. that will allow your axle to be much more flexable and give you more travel without fighting against you. The arms and track bar are holding the axles in place when they are tight. Besides, you should always loosen the control arms and then re tighten them back up after it is back on the ground with tires so they are not in a bind from the old ride height before the lift. Make sense? Keep up the good work... I still think Jerry was going to pick me.... :-)

@Garagecouple 4 года назад

Thank you so much for that pro tip. I will make a note of it and do that next time we do anything suspension for the rigs. I appreciate you taking the time to add that... Lol, Jerry was being a brat..if he was more into it he would have forsure grabbed your paper..Oh well, hopefully next time! Thanks so much for watching!

@daubie3 4 года назад

@@Garagecouple Well, I'm no pro by any means, but I have been wrenching on Jeeps and the like for a little over 40 years now and I have learned a few things along the way by busting knuckles and smashing fingers... So, that was WAY before this thing called the internet. Early on you just took your best guess at how to do something and try it until you got it done, and then hope you remember how you did it. (To help reduce blood loss the next time) But, like i had said earlier, it would still be a good idea to loosen and then re torque all of your control arms with the Jeep sitting on its wheels. That will relax the bushings and take the preload out of them from adding the spring spacers. Again, you guys keep up the good work. In case you were wondering I presently have a 2005 TJ RUBICON. I've had a couple of JKU RUBICONS, but really keep going back to the TJ's...

@doctordeath5519 2 месяца назад

Stright forward lift. Good job !

@nicolasprice9860 4 года назад

i would definitely be watching the cv boot on front drive shaft!!! common failure with any lift on jks. rzeppa high angle cv joint is good fix.

@Garagecouple 4 года назад

Thank you for the tip!

@fixmeuphandyman 4 года назад

@@Garagecouple yup, i had it happen with my 2.5' teraflex lift and 35" tires. Def a common issue, once you go up an inch or two in lift kits, that CV boot will give and the bearings in the front drive shaft will start to make cracking and popping noises because the OEM shaft isn't designed to run daily in that angle. Best thing is to get new drive shafts with yokes on each end and ditch the OEM CV setup. Curious to see how the spacer kit will work. It adds more bolt tie-in's which I myself am weary of bc it creates more points of stress and failure. Hopefully you guys don't experience that.

@markmissildine961 3 года назад

@@fixmeuphandyman hey what the fix for the CV boats and do you have a link to the drive shaft or is it going to have to be made custom

@fixmeuphandyman 3 года назад

@@markmissildine961 you will have to take a measurement of the driveshaft length after putting on the lift and have someone make you one. It can be done with or without the existing driveshaft in if the height of the lift allows. My fix for the moment was getting another OEM driveshaft from someone who had one in their garage until I can afford to have one made and ditch the CV joints and go with something a bit more robust.

@adventure_48 3 года назад

@@markmissildine961 This is Kevin, if you want to see my Jeep, head over to The Texas Exit page and check it out. I haven't done a full walk around but you'll be able to see a little bit of it.

@anthonycalderon3569 4 года назад

Looks good guys 👌🏽 Recommend to buy new links for the sway bar and some extended bump stops

@Garagecouple 4 года назад

Solid advice, will likely do that soon! Thanks for the tip and thanks for the comment! 🍻

@michelskelling 4 года назад

Wow! I need that. And it look so easy.....

@Garagecouple 4 года назад

Was very straight forward! Let me know if you have any questions! 🍻 🚙

@luigarci5202 3 года назад

Gracias a este video también levanté mi Jeep aunque yo use Rought country 2.5 me ayudó mucho este video

@Garagecouple 3 года назад

cheers

@luigarci5202 3 года назад

Saludos desde Austin Texas

@luigarci5202 3 года назад

@@Garagecouple Right now go to suscribe

@scottdworakoski5824 2 года назад

Thanks for a GREAT Video! BTW, you two are really cute together!

@christianaguila8297 3 года назад

Aweosme video, but I’m curious because when I see other body lift kits the rear bumper stay in the same place and the car goes up?

@MattBrownbill 4 года назад

Great vid, thanks 😁

@Garagecouple 4 года назад

You are very welcome! Thank you for watching!

@johncourtneyscott2757 2 года назад

It looks great guys

@Garagecouple 2 года назад

Thank you!

@altonwilliams4654 2 года назад

Ight you guys talked me into it.

@L319DNHUSA 4 года назад

FYI. If you would have unbolted shocks and sway bar links on both sides let suspension hang install springs on both sides before re assembling anything. It would be much easier to do your coil spring spacers

@Garagecouple 4 года назад

Thank you !

@T3m0ur 3 года назад

I subbed as soon as you mentioned affordable mods! Who doesn’t love great beginner mods on their Jeep!! Can’t wait to get one :(

@Garagecouple 3 года назад

Awesome! Thank you!

@youngmoneyoutdoors841 4 года назад

Well done. Not an easy project without a lift. Great video!

@Garagecouple 4 года назад

Cheers and thank you!

@mcplar1971 4 года назад

Great video.. bought the RC version which is pretty much identical and will be installing it this week. Word of caution, I noticed the speed sensor wire was the issue with the first rear corner. Careful not to snap that, another hundred bucks to replace. Disconnect the wire at the frame and it should give you plenty of room. Glad to hear you're still happy with this lift!

@Garagecouple 4 года назад

I'm glad to hear you love your kit too! Thank you for the suggestion! All the best!

@kellianderson2582 Год назад

Did you use the factory sway bar links when u installed the lift kit or did you have to install longer sway bar links I have a 2015 jku I ordered this kit just wondering before I get started

@sl15026 Год назад

Have you had to change the drag link or track bar after this? Any wobble?

@caponyx 4 года назад

just bought a JKU and im wondering what lift kit youre using. love the channel Ive got crazy mod bug so thanks for the links to the products

@Garagecouple 4 года назад

Hi there! Welcome to our channel 👋! We are using the motofab lift. The link is in the description 👍

@johnbelch8919 3 года назад

Awesome lift

@Garagecouple 3 года назад

Thank you!

@Pnwutvadventures 2 года назад

Hey guys just wondering how has this 3in lift held up? I purchased a 3in fab tech lift kit with coil springs new shocks front sway bars and rear trac bar relocation but now I’m having people telling me I will need a driveshaft control arms and trac bars just wondering how yours handled after this lift kit?

@williamsmyth8703 Год назад

My headlights are completely shot would definitely like a new set

@fvkn_savage 3 года назад

Just put this lift on my 2017. Still have the rake in the front but regardless i like how it came out and the height i got and clearance for the 35”s i put. Great video watched it a few times before installing mine. Thanks for the vid

@Garagecouple 3 года назад

Love thia comment! Glad we helped! Cheers

@nelsonenaccion4x424 4 года назад

Great video guys i just buy an Rubicon 11 is original so that is my begin lift i would like to do it looks great guys question did you have an video how you cut the fenders flares thanks ill ready suscribe

@Garagecouple 4 года назад

Hi there! Thank you for the support! Yes we have a video, check it out on our channel! Cheers

@yeyosrepairs6634 3 года назад

Good video 👍🏼

@Garagecouple 3 года назад

Thanks for the visit

@BadInfluence_JKU 4 года назад

How has the lift been since install? Would like to see an update video

@Garagecouple 4 года назад

We are planning on making one soon! Its been great

@GhostshooterGames 2 года назад

I have 33x12.5R20 tires. The front of my truck measures 43 inches. How much would it be lifted?

@regmartin688 4 года назад

Great video.

@Garagecouple 4 года назад

Thank you

@Aamilahpeso 2 года назад

Do you have any recommendations for a 2021 Willy’s lift..this won’t fit my jeep

@GF-pc5bt 3 года назад

All I saw from this to this was a wardrobe change!!!

@Garagecouple 3 года назад

Lol!

@riderkonkle9972 4 года назад

Great vid!!Just curious if you had any kind of lift on the Jeep before putting on the spacer lift kit? or if you just ran the 35's on a stock suspension/lift. Thanks in advance!!

@Garagecouple 4 года назад

Thanks for the kkind words! We didn't have any lift, we were running stock height with 35s without any rubbing or issues, but we had to cut the fenders! loving the lift kit! Cheers

@starkiller6740 4 года назад

Can u stack this if u have 2in lift kit

@g0rillak1ng25 3 года назад

Nice video!

@Garagecouple 3 года назад

Thank you°°

@save-the-civic6386 Год назад

Quick question what size wheel spacers are you guys running? They look beefy.

@TonyArechiga 15 дней назад

Installating this kit and the brake line stuff made me nervous. Ha! Felt like I was going to break it. Ha! (Pun intended)

@randellwagner3454 Год назад

Thanks for video an chance to win those headlights..

@Garagecouple Год назад

Be sure to check out ourblatest video for another chance!

@staceycampbell3640 3 года назад

We have this kit and thank you for your video! Just a question we have two small 1 1/2 spacers that we can’t figure out where they go.

@Garagecouple 3 года назад

Hmm.. I'm not exactly sure where they go either..

@Isteveym 3 года назад

If they are H shaped , with tubes at the end perhaps they might be the shock extenders ?

@G-I-JOE 3 года назад

Look at 10:14 in the video. It is the spacers that go into the lower shock mount on the front axle. There is also a good shot of the spacer at 10:50 and 13:37. It keeps the bolt from collapsing the lower mount when you install the shock extension.

@CYoung-fv4vu 3 года назад

Question,,,, I have this kit installed. also have a set of JKS Quick Disconnects up front for the swaybar links. Wondering if I did disconnect the links would that front spacer stay put if it gets fully extended going offroad????? Have a trip coming in a few days

@Garagecouple 3 года назад

Not sure about that! I'd check with a professional!

@stephanieball7521 2 года назад

I keep getting told not to put a cheap lift kit on my jeep. Are the cheap ones as good as the 1k ones?

@natewelch6608 3 года назад

My 2008 jeep wrangler has the smallest looking springs. Did you guys change out those at some point as well? or just put the 3" spacers on it?

@Garagecouple 3 года назад

We put in the rubicon springs and added the spacers, but we are completely re-doing the suspension soon, stay tuned

@dustinramsey358 Год назад

Question: I just installed synergy front end parts… New track bar, new tie Rod, new stabilizer, and new drag link that mounts to the top of the passenger side tire top knuckle(flip over kit). Also installed track bar relocation bracket that now matches the same elevation mount point of this new drag link flip mount. I currently have 2” lift on the jeep, but now the top part of the track bar relocation bracket is hitting the bottom of the jeeps frame when I hit a bad pot hole or bump. Will this 3” lift kit from Amazon solve my issue by providing more clearance, or 4” lift??

@Garagecouple Год назад

That's a good question. I'm not sure. If you have a clearance issue then yes. You would have to measure how much more clearance you need and buy the appropriate kit.

@Isteveym 2 года назад

Could i use this kit with 2.5 or 3 inch lift ?

@hugoavalos6402 3 года назад

Can i do 2.5 lift kit on 35s . Great videos very useful

@Garagecouple 3 года назад

With cut fenders yes!

@juliansandoval1204 3 года назад

Would I be able to use the stock springs with this lift kit, or should I buy different ones?

@Garagecouple 3 года назад

You could use the stock springs!

@zumezoom9593 4 года назад

how much lift should i install on my jeep if i plan to install steel front and rear bumpers, with steel rock sliders and skid plates? obviously i'll also need to install a winch and carry a minimum of 35x5 inch tires?

@Garagecouple 4 года назад

How high do you want your jeep?

@AI5KP Год назад

Could you do both sides at one time to make the spring change easier? Or are you using the intact side to hold it together?

@Garagecouple Год назад

You totally van!

@g.w.stegall 3 года назад

Where can I find the third brake light that goes behind the spare tire that’s fully functional turn signals and brake light

@Garagecouple 3 года назад

I havent heard of that before

@kenvetter3603 2 года назад

Hi guys, great job! Did you end up getting an alignment after lifting?

@Garagecouple 2 года назад

Thanks for the kind words! We aligned ourselves and made a video on it! Just search align on our channel

@vanessafrmtx1687 4 года назад

Would you suggest brake line extensions or were you comfortable with how taught they were

@Garagecouple 4 года назад

We were happy with the brackets that came with this kit. So far has been working really well for us

@josephvitale321 4 года назад

You mentioned that you have Rubicon shocks... can I put that on my Wrangler Sport Unlimited?

@Garagecouple 4 года назад

Yup! We put rubicon shocks on both our tj and our jk. It takes modifications to fit a tj but bolts right up to the jk. The shocks are amazing

@soccergolf413 4 года назад

With adding this kit, did you guys have to change the front driveshaft? Or was there no real change in driveshaft geometry? Was there anything you guys had to change afterward that you didn't realize at the time of install? Thanks, this video and all your others are very informative!

@Garagecouple 4 года назад

Hi! We haven't changed a thing! Been running it this way without any issues

@williamrunsatlanta9491 7 месяцев назад

Hey I know I’m late but are you still giving away those LED headlights?

@2000wrx 3 года назад

How did you address the driveshaft being much closer to the exhaust. Most lifts will need exhaust hanger extensions.

@Garagecouple 3 года назад

We didn't have that issue!

@BluePen-AZF 2 месяца назад

@Garagecouple this was 4 yrs ago.. How did the factory shocks hold up with using the spacers? Did you end up going for lift shocks or keep going as you did?? How was the road travel??

@Garagecouple 2 месяца назад

Still on the same set up rides absolutely amazing

@BluePen-AZF 2 месяца назад

@@Garagecouple Thanks for the feedback!! And congrats again with the Baby!!!

@MT-lv7xn 3 года назад

Awesome video... do you not need new control arms with this kit?

@Garagecouple 3 года назад

Nope!

@williamvarner3541 4 года назад

I’ve heard of people having to use longer sway bar links for front and rear. Did you guys have any issue with that?

@Garagecouple 4 года назад

Nope!

@williamvarner3541 4 года назад

Awesome I bought a similar kit and was reading of people having to do so! Thanks for the info!!! Love the Jeep btw!!

@BlazingChicknMan 3 года назад

Hey guys where did you put your jack stands in the rear for the rear installation. I am having a hard time finding a place that is even on both sides so i can let down the weight of the jeep to lower the axels with the jack. I was trying to see where you had it mounted on the video. Thanks in advance! Love the channel!

@Garagecouple 3 года назад

On the control arm mounts! Good luck and let us know!

@BlazingChicknMan 3 года назад

@@Garagecouple I was able to install the 2.5 lift on mine thanks to your video. Thanks for replying

@Garagecouple 3 года назад

Oh thats awesome! How do you like it??

@BlazingChicknMan 3 года назад

@@Garagecouple so far so good. Nice to have it leveled out. That coupled with Rubicon shocks gave me a nice lift

@fieldsbazen543 4 года назад

Have you had any problems with this lift kit? I’m thinking about putting this on my 2011 jku. Thank you guys!

@Garagecouple 4 года назад

No problems at all! Been a long time and 0 issues

@fieldsbazen543 4 года назад

Garage Couple thank you!

@stratdemakis1115 4 года назад

Did you have the stock shocks on your jeep before and after you did this installation?

@Garagecouple 4 года назад

We had stock jk rubicon shocks

@tidanhibbard 8 месяцев назад

Sweet

@Garagecouple 7 месяцев назад

Thanks

@camachosrusticwoodwork5653 4 года назад

Nice video, how's driving and off road any difference?

@Garagecouple 4 года назад

It drives like stock!

@ReverseTurnstyle 4 года назад

How is this lift holding up? Any need for a longer drive shaft?

@Garagecouple 4 года назад

Hi there! Lift has been completely issue free. Literally couldn't be happier!

@richweber5090 4 года назад

@@Garagecouple did you need to get an alignment after? do you use an adjustable track bar? Basically was it just 'plug and play'? Great video!! ~R.

@johnortlip1140 4 года назад

"And it's in". That's what she said. "Just tug on it; it will work" y tambien

@Garagecouple 4 года назад

Lololol

@rivvercooper2410 4 года назад

How is the lift working still and did you guys need to upgrade your front driveshaft

@Garagecouple 4 года назад

Lift has been perfect. No issues at all. We didn't upgrade the drives haft or anything else aside from the kit.

@jeffw7233 3 года назад

Can you share what the shop light or link to the LED light is? Thanks

@Garagecouple 3 года назад

We have them in our amazon shop, just google garage couple amazon shop

@vanislandfishing4159 4 года назад

The nut that wouldn’t go on was a stover nut it’s ment to go on and stay on

@Garagecouple 4 года назад

Thank you!

@TonyArechiga 15 дней назад

Had the exact same problem with the supplied nut. It wouldn't go on with any tool.

@gilbertomartinez3087 3 года назад

I have 2 inches suspension in my jk I need an inch more to put tires 37 you think this works

@Garagecouple 3 года назад

Yes with cut fenders it will work

@dejanae305 2 года назад

Is this stock height before??

@kevinyin209 3 года назад

Awesome video! Does this 3 in lift mess up your steering and alignment?

@Garagecouple 2 года назад

Hasn't messed anything up in the few years and 30k+ miles we have had it on

@jacklee5071 2 года назад

Installed on my 2018 JKU. Had to re-center steering wheel slightly. Left front wheel needed slight alignment. Also had to replace the rear track bar with an adjustable one to re-center the body to axel. When installing my new longer rear sway bars, I had to move them to the inside of the mounting brackets to avoid top bolt contact with the wheel. Note: JT gladiator rear sway bars are also mounted on the inside of the brackets.

@kevinyin209 2 года назад

Should I purchase a Rough Country Rear Track Bar Bracket, a front track bar bracket, and 2 sets of Rubicon Express RE1157 sway bars, 1set for front, 1set for rear? I have read a lot of reviews that an alignment is highly recommend. What about steering geometry? Does steering needed to be adjusted? Sorry, I'm new to the jeep culture. Just got a lot questions and want to make sure that's all! 😅

@martinkolar3595 7 месяцев назад

Is yours JK or JL? Thanks

@coreydawson5689 4 года назад

Does this lift get rid of the factory rake and make the Jeep sit level?

@Garagecouple 4 года назад

Ours didn't have a rake from the factory!

@coreydawson5689 4 года назад

Garage Couple did you regear the Jeep to run 35s

@wykkydjvc 6 месяцев назад

didnt bother watching cuz you got the longest sponsor vid i ever seen holy crap

@Garagecouple 6 месяцев назад

Oh okay bud

@MatthewTafoya 3 года назад

What is the rear door surround make/model. I can't find any surrounds like that for my hard door for the rear of a 4 doors JKU thanks

@Garagecouple 3 года назад

Not sure what a rear door surround is...the tire carrier?

@MatthewTafoya 3 года назад

@@Garagecouple oh, its that black plastic door frame piece that goes around the rear solid doors when the hard top is off. It supposed to give the rear soft door some stability when the top is off but I've never seen them for solid doors. Does your jk have a hard or soft top? I have a hardtop but don't have it on most of the year...

@Garagecouple 3 года назад

Oh got it!its a hard top.. they sell those frames ig you want to convert to soft top

@liontigar7135 3 года назад

After lifkit installation,does your traction control light stays on??

@Garagecouple 3 года назад

Nope!

@rcpartsyard3840 3 года назад

you need to center the steering wheel

@miguelfloriano9039 2 года назад

Go back to that :)

@Garagecouple 2 года назад

🍺

@terryderush7066 4 года назад

What a man will do to keep a Beautiful Woman HAPPY!!!! Great job.

@Garagecouple 4 года назад

Thank you so much!

@FlowYork 4 года назад

Did you have any lift on it before? If not did adding the 3 inch in the front and back did it get rid of the rake? I saw pictures on amazon and it looked like it did not get rid of rake

@Garagecouple 4 года назад

We did not have a lift and it currently sits without a rake! Cheers

@FlowYork 4 года назад

Garage Couple thank you so much for replying! I plan on buying this for my 2016 jk next week and was debating just putting on the front half of the kit

@fvkn_savage 3 года назад

K. Charles i just installed my lift last week and i have a 2017. I still have the factory rake but still looks good and put 35”s on

@probam10 Год назад

What kind of fender flares do you run

@Garagecouple Год назад

Metalcloak

@MyTomatoesHateMe Год назад

Did you need any additional components, like sway bar links or rear track bar bracket?

@Garagecouple Год назад

Nope! Just whatever you see in this video. It's been driving fine since we installed it. Still has the same lift kit

@MyTomatoesHateMe Год назад

@@Garagecouple Thanks for letting me know! I actually purchased this kit over the weekend and just found your video. I was wondering if I needed to order anything else. Is there no change in its handling, both highway and off road? I'm no wheeler, but I'd like to have that option

@Garagecouple Год назад

@@MyTomatoesHateMe drives just like stock just higher. Didn't need anything else

@MyTomatoesHateMe Год назад

3000 mile checkin. It's just like the factory ride. I had a bit more difficulty than your video, but it was not difficult.

@hummdeez 3 года назад

Did this kit level the front or is there still some noticeable stock rake ?

@Garagecouple 3 года назад

It doeant change the stock setup in terms of angles. Adds 3 to the front and rear

@hummdeez 3 года назад

@@Garagecouplethanks for the reply! do u still notice the that the front angles down a bit?

@Garagecouple 3 года назад

@@hummdeez ehh not really! We are actually preparing to do a suspension lift soon! Stay tuned

@nando8909 4 года назад

Does your Jeep still have that lift? And the control arms don’t need to be longer for this lift or can you use the same stock control arms!!

@Garagecouple 4 года назад

Yup! No issues at all stock control arms

@nando8909 4 года назад

That’s I just ordered this from amazon

@Garagecouple 4 года назад

Sweeet

@nando8909 4 года назад

Garage Couple if I wanted to upgrade the shocks any recommendations

@Garagecouple 4 года назад

Stock rubicon shock

@jeffchoura821 3 года назад

I had a question I have a manual Jeep 2016 rubicon I heard that I would need to get break extension is this true please respond need some help???

@Garagecouple 3 года назад

Nope. Not true!

@jeffchoura821 3 года назад

So how do I go about that do I just pull the hell out of them after I unbolt off of the frame?

@Garagecouple 3 года назад

Just follow the instructions in the kit. If you feel uncomfortable with the install have a professional do it so you don't put yourself at risk!

@jeffchoura821 3 года назад

I’m sorry to bother ya but do you think you can get away without using the break line bracket I heard of people not even using them any thoughts???

@Garagecouple 3 года назад

You probably can but its a 5 minute fix

@Itsaveragejoey 4 года назад

What size spacer are you running? Where did you find it? Did you make a video on spacers?

@Garagecouple 4 года назад

2 inches and we havent had the chance

@Itsaveragejoey 4 года назад

Sure, where can I find a link to these or what is the brand?!

@Itsaveragejoey 4 года назад

I’m curious if it’s an Amazon type deal. Can’t find any 2 inch spacers

@Garagecouple 4 года назад

They have them on amazon, ebay, and all over :)

@Itsaveragejoey 4 года назад

Garage Couple, ah I need links. It’s hand looking for this stuff with an older phone.

@paulnnateproductions 2 года назад

Ok the only error I see was that the "biggest bolt " is actually for the rear spacer. The bolts are very close. Your rear spacers welded nut is upside down. Otherwise helpful

@kyleb.7870 3 года назад

Most affordable lift kit n spacers for a 2020 jl unlimited sport

@Garagecouple 3 года назад

Link in our bio!

@richsmith3120 4 года назад

I just hope you torqued all the bolts back to spec.

@Garagecouple 4 года назад

We did not! We just gave it some "ooomph" and 1 yr later still holding fine!

@richsmith3120 4 года назад

Consider yourself lucky so far.

@Garagecouple 4 года назад

Not really! Not lucky, things don't loosen when given oomph..hehe

@dadedadesmile 2 года назад

…Hello!! I wanted to ask you if the suspensions you mount are original, and if after the assembly you felt the jeep too stiff while driving… thanks for your answer!🙏🏼🙏🏼

@CreativeTypeish 4 года назад

What size tires do you have?

@Garagecouple 4 года назад

35s

@Fabuliciouz18 4 года назад

How big are your spacers?

@Garagecouple 4 года назад

2 inches

@Fabuliciouz18 4 года назад

With a 3 inch lift kit can you put 35 inch tires without modifying anything ?

@jasonfiveash005 Год назад

Yikes! Only one spring compressor? Good thing it wasn’t tightened much or it could shoot out at you! Always use two.

@Garagecouple Год назад

Totally!

@chrischenusa6323 9 месяцев назад

The nut provided in the kit was a Nylon stop nut, it is a great nut and always fits tight Do not be afraid to use it! Oh, I forgot, I called Dickies, your safety shoes are on their way! LOL Tks