Nugget Garage - 13's for $1300, We TURBO the N/A BARRA and SEND it! 

You guys need a 3rd driver named David so the door can have "David Ethell Hoff" on it

Classic Aussie "She'll be right mate" attitude.

It's shows your true character that you offered the other guys use of the dyno! You two are true gentlemen sportsmen!

Please keep going ?? I think we would all love to see how far you can push a BA na Barra ?

Awesome stuff dudes - DIY kiwi here this loves this sort of stuff and NG is a must watch - thanks!

The titles misleading Should’ve put 12 for 1200$ Your view count would go higher! 😂 Good shit boys, keep it up! 💪🙏

Awesome content from you guys and I've already watched the Overtaking Lane video which was great and great to hear that you offered other competitors the use of your Dyno that's great sportsmanship on your behalf

12's for $1200

loving how you blokes are getting better at videos. good stuff keep it up

i have been waiting for this! :D

You took up the challenge and didn't get all serious with it and made so awesome videos. There were lots of smiles and laughs, that has to be a win

thanks blokes, loved the challenge from start to finish, bring on the nxt project

That VR sounded mangtastic. Music to my ears

If you are going to keep drag racing this thing, I think you should do the S3 and S4 solenoid delete. This is the best way to make the auto last, unless you have figured out how to adjust the shift time (not line pressure) in the tune. I had a quick search for BA ECU pinouts, looks like S3 solenoid is on pin A17 and solenoid S4 is on pin A18, trace the wires, cut the wire, leave trans side of wire flapping in the wind, ground ECU side of each wire to ground via a 27 ohm, 5 watt resistor (the big white ceramic jobbies). That will make it last. It does sound like its shifting pretty well at the moment, which is surprising for an old BTR. Keep up the good work blokes

Thank you guys. While many will say the build, the car and the challenge was your enjoyment too. I have no doubt the video editing and shooting was for all our benefits. So, for that I thank you both very much. My only criticism, i believe where the vehicle lacked was in having such a heavy tune on the engine while running stock parameters on the gearbox. But thats nit picking. Im impressed

Awesome work... Highlight of the week is when your vid drops

$100 and a reach around hahahaha :P

Great video guys, love what can be done on such a small budget and also how modest you are ... time for some more nugget garage stickers

Great work blokes! Bit surprised by the 12, well bloody done!

Well done fellas! I come for the falcon, stay for the Dragna content!

Bloody well done fellas! A 12 sec is worth writing home about!

Cheers for the great content as always

This was a fun one legends 🤙🏼 can’t wait for the next project

Nugget + $100 reach around = awesome nugget. Love the video as always guy's. The only thing i can say is it would have been great to get a build video then a drag video. Anyway's only a suggestion love all your vids great to see you guy's get a win👍👍👍🥃

Loved this series so much, love seeing shit none turbocharged motors getting boost and making power

Use the factory window washer bottle and pump. Stick carburator jet in the end of the tube for adjustment and atomization. Cheap and effective.

watching these legends makes me feel proud to me from the mud flats. shout out roothy

Awesome video guys, thank you. 😁

Seems Like Al was the real winner.. ha ha ha Great stuff as always guys. Crazy how well it ran.

You guys are the Aussie roadkill keep up the good content and good luck with future projects

Love it guys. Very Entertaining.

Should have added knee pads to the budget 🤣🤣🤣

Top Job, went better than we expected 👌

Good to see our EA Falcon when you ran the 12.7 were out doing base runs with it and ended up with 16.9 ... not bad for center fire injection 300k engine and manual :). Loved the series and hope that we/others can join this year !! :)

This was a cool series to watch guy's 👌 P.s thinking of you Aussies from across the ditch with the bushfires.

thats sick good job

Good ole Aussie ingenuity !

Awesome as always! I was just wondering what you were doing with your hand in your pocket while discussing Frozen? LOL

KEEP AT IT BOYS. KEEP AT IT. KEEP GOING

Should show more of the fab work, even if it’s more dodgy that woody facial hair.

Top series, love to hear what you did in the excel for 14's Scotty

Well done guys. Thats great what you did with the ba. Should do a burnout one or best offroad cheap family car.

"No good deed goes unpunished" - Turbo Yoda

Oaken - Yoohoo... big summer blowout 😂

Nice vid loved it well done on the challenge

When all else fails....turn everything off!! Nice work lads 👌

Yeah! So keen

12's! Good job!

Great job, just really wish you guys would show more of the fab work. It's always fun to watch a low-buck turbo kit made by pros that works.

Yup, dead set legends. Keep on keeping on you fellas, nailing it like a pair of champions

I don’t know how many times I’ve watched this. I love it! When is it going to willowbank next?

Great work Guys, keep it UP!!!! But I think you need to see if we can get a visit from Uncle Rodney

two top blokes.

Love it blokes! Kick ass

Al got a reach around!!! 🤣🤣🤣

Ha I did a compression test on one recently same thing oil in the spark plug holes/above the plug on some but ran perfectly 😆bloody unbelievable!

That was fucken awesome! Loved it boys!!

Going so fast the camera falls off is the new "Danger to manifold"! :D

Hey Boys, Great work, loved all the Nuggets so far, I've got a name for this one, The Blue Poo. came to me as I was waiting to complete the paperwork ;)

I'm a fool. I've been giving away stuff for just a handy. I should have been getting a handy + cash.

Got to love those Barras

That's more that $1300 worth of fun.

10s for 2000 sounds like a great idea

Who doesn't love the sound of a V8? But you CANNOT beat the cheap HP you get from bolting on a turbo. My mate spent $10K on a Cleveland that was good for 60K. It was an excellent engine...but the price. I have got 50% gains at the treads just by turning up my boost (still safe), adding a cheap Chinese intercooler and remapping the factory ECU. Love the channel. Could you be a little more Aussie, though? I want to see a Ned Kelly tattoo or the Southern Cross and always wear a stubbie holder with no bottom on your wrists yeah? Then you would fit in well in my country town. :)

This is glorious...

Hahaha 12s pretty churr and glad you won against the holden👍

Cheers. Keep goin like it

I can't wait for.. "not fantastic"!

nice work 👍🍻

11:08 watching those needles swing hard right . 6lbs boost two and half thousand revs.

Im a huge fan of the build fellas! You said you were thinkin of putting the engine in another donor vehicle. An rx8 with a blown motor would be the prefect donor. And its only been done once or twice on the planet as far as I can tell.

S5 solenoid is adjustable. Wind in for more line pressure. About 3/4 of a turn in my skid car gives very very sharp crisp gearchanges.

I went and saw frozen 2 with my girls, they enjoyed. I thought the town was going to get wiped out by the dam letting go. Oh the suspense!

Lol have a go at the front bar! May as well take it off and throw it away. Bloody thing would probably chop my l98 calais though.

Just shows to go ya. You can pick up a cheapie, throw a hair dryer and a quick tune and run as hard as the big boys costing 000's more. All for fun and a continuous smile. All using the OZ phrase "She'll be right, mate."

Can you use the windshield washer bottle to do methanol injection?

That wastegate is nuts! It's bigger than the exhaust.

Loved it! You guys should see how little more you can spend and get it into the 10s. 10s for 2k challenge maybe 👌

Hi , did you use a FG NA map sensor?

nice power. can only assume thats pretty much 100% duty cycle on the injectors?

Good stuff

Mint!

"$100 and a reach around" LOL

hey fellas, i want to do the same thing on my wagon whats the cheapest way/dongle to install the f6 map do you have to buy the hptuners mpv12 then the credits. or better of getting the sct x4 but its more expensive and you can only use it on the one car

Hey man do you have a link to purchase the hp tuner

What software you using there? a Bit of the old Foreskin or the ridgy-didge?

Host the diff down onto a wheelie bin! 👌🏻

Never weld a Falcon diff. Minispool is cheap and solid. Though a 3.45 XR6 diff gears is what you needs, more so with those big tyres. Water injection? Windscreen washers do the job. Temps? A bag of ice into the intake path.

cut a rusty datsun 120y's firewall, shoehorn the driveline with a welded diff in, sit in the back seat and you should run a nice little 10 atleast

Sloppy Mechanics would be proud ;)

Up the mighty Barra💪

So the torque reduction worked by putting it in 2nd? I’m having an issue where in mine if I boot it it’ll shift itself to 2nd or sometimes 3rd. I have a haltech plug n play.

With the tune that you used to start with was that just a generic tune eg 10psi phoon tune?

Nice/funny entertaining project 👍 Should've used the front screen wash for the water/meth injection? ,👍

Could you show the process of the turboing process fellas, I'm in same boat as you and i have a n/a ba and want to start drag racing.... I w amt to be able to have good fun for a budget as I want to learn to. And also with regards to the rods. Would it be wise if I just flipped it upside down and just replaced rods with some bigger ones? Just for some safe, reliable fun as a beginner drag racer, I'd love it to last at least a year.

Well done on the 12's for $1,200, but what is a reach around really worth?! Content is always improving, keep up the great work!

Falcons are the best. Got a 1998 EL XR8 tickford I'm doing some work on at the moment.

HAAAA 12s how good👍🏻

Hey, i own an FG NA and im looking at forced induction on the cheap... did u use a F6 tune file and work from there or...?

you lads based in perth or?