PORTED THROTTLE BODY VS. STOCK THROTTLE BODY!!! DOES IT REALLY MAKE A DIFFERENCE?!! 

for real ya got sometin here keep hustlin..run yo shit

You just saved me $300 bucks, I was gonna get a ported throttle body but not after this, great video bro!!

Down here in Hawaii we got run your mouth. Basically talking about the same shyt 🤙🏽

I have same tb and airaid spacer also look into vas traction bars. Get all of your power to the wheels. Get at me I van tell you more of what I have done to my 2014. Thnx

What is the name of the performance place that offers a non flapper on the throttle body? I could tell what you said in the video?

I just found your wrecked truck on Copart. Hopefully you are ok.

Need a tune

Can the flapper be beveled?

well done cool truck

porting needs calibration? write this tuning gives +0,7% power on 4500rpm

step it up to 95mm and get solo 95 to 87

You might be able to tell a difference from bone stock. But running anything under 9 in the 1/8, a 3 to 15 hp increase wont be noticable. Hell you might even have noticed some better numbers from a very deep stage at the light than from a little bit more air. Not sure what kinda hp your making. Im assuming over or around 500 hp. So if all this mod does is give you 3 to 15, on the high side you've added 3%. Almost nothing!. And you pointed out your numbers on a 60 vs 90 degree.obviously better air quality on the cool day. So bottom line is, its kinda of a dumb mod unless your factory stock. But cool video and thanks for helping me put the breaks on this goofy idea

Proof is in the pudding. Ported throttle bodies are a bust.

i seen this truck in auction 🥲