No video :(

RC-Films: Tamiya TT-01 Rally Conversion Tutorial (English)

Подписаться 4,9 тыс.

Просмотров 68 тыс.

50% 1

The Tamiya TT-02 will be released soon. So here is an idea of what to do with your old Tamiya TT-01s: In my first tutorial I like to show you, how I converted my Tamiya TT-01 from a touring to a rally car.
Deutsche Version / German version:
• RC-Films: Tamiya TT-01...
More Tamiya TT-01-Rally-Videos:
• RC-Films: Tamiya TT-01...
• RC-Films: Tamiya TT-01...
• RC-Films: Tamiya TT-01...
My other videos:
/ teamingel
Music by:
Kevin MacLeod "Future Gladiator" (incompetech.com)
www.incompetech...
Licensed under Creative Commons: By Attribution 3.0
creativecommons...
and
Freie Filmmusik by Cayzland Studio
www.cayzland-mu...
Thank you for this great pieces of music!
If you liked that video, please subscribe to my channel:
www.youtube.com...
Also visit me on Facebook and Google+:
/ teamingel
www.google.com/...

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 153

@TeamIngel 11 лет назад

Thank you very much for your nice comment! I'm glad that this video was helping you a little bit!

@Truth974 10 лет назад

Extremely helpful and informative!!!!! It looks like all the modifications were made using a dremel and very easy too! Well done sir and I can't wait to convey mine over!

@TeamIngel 10 лет назад

You can do all these modifications also with a simple knife. I'm glad, that my video can help a little bit! Thanks for watching and for leaving a comment!

@TeamIngel 11 лет назад

Thank you very much for watching and for your comment! I hope my english wasn't too hard to understand!

@DystrophicEvolution 5 лет назад

This video has inspired me to finish off my rally conversion. I bought some some bumper body posts to prepare when Vaterra releases the '72 Camaro body to do a Max Max sort of car. I had a Vaterra '69 Camaro before, but the ridiculously low ride height meant I had to be choosy where to use it even though the pan had ample scaring after an hour of first use. Thanks for the detailed share and the conversion over to English.

@TeamIngel 11 лет назад

Yes, I can totally recommend an internal body. I used a TT-01 raincover to keep the dirt out, but a cutted plastic bottle will also do the job. During shooting my winter rally video my raincover comes loose and I didn't had duct-tape with me to fix it. So all the snow comes in and finally blocked the steering. Thank you very much for watching!

@TeamIngel 11 лет назад

Hello LEGO X! Yes, it will work. The car used in this video is a Type E version. Thanks for watching!

@TeamIngel 11 лет назад

Thank you very much! I'm glad that my video was able to help you a little bit!

@TeamIngel 11 лет назад

Hello Sean! No, the car in this video already have some tuning parts, because it was used for competition onroad racing. The following tuning-parts are installed in the car: - Aluminum drive-shaft - CVA-Dampers - Ball-bearings Everything else is still stock. Thank you for watching and for your comment!

@pierrotclown9334 6 лет назад

TeamIngel I wonder if 62mm shocks would work? I'm planning on building a rally spec for myself

@TeamIngel 11 лет назад

You're welcome and thanks for subscribing to my channel! Yes, the friction shocks are a little bit stiffer then the CVA-Shocks with the same springs. Maybe put a drop of oil on the inside to smooth them out a little bit. If you don't want to compete with your rally car, maybe put some additional weight on it. I think that this should also help a little bit.

@BEANS420ful 11 лет назад

I just did this conversion today and it is sweet. I'm in love. I'm using the stock touring wheels with foam ok traction but really need rally tires. I also have shocks from my old traxxas street sport, they extend to 70mm. Thanx for the vid i didn't know about the out drive cup trimming part.

@rcdesynz 6 лет назад

Very good instruction! Modification works perfect for extended travel!

@TeamIngel 11 лет назад

Wow, thank you very much! Your comment helps me a lot, because I was very worried about if my english is good enough for a tutorial video.

@loquitos1972 4 года назад

your video showed up as a suggestion but the initial ground clearance was not 6mm. Your ruler has a blanc space in front (before 0). That counts too. So the initial ground clearance is at least 12mm :)

@joehart3826 Год назад

Top comment

@pastimesteve 11 лет назад

Great tutorial! Many thanks. Steve

@TeamIngel 10 лет назад

I have never heard from this diff hub, but searched for it immediately. Really great, thank you very much for your advise!

@TeamIngel 11 лет назад

Hello Keith! I'm using shocks from tamiya with item-no. 50519. You can build these shocks in different lengths (55, 64, 67 and 70mm). My shocks are about 60mm long. Thanks for watching!

@TeamIngel 11 лет назад

That are some great ideas! Thank you for watching and for your comment!

@TeamIngel 11 лет назад

Hello Mac Turbo! I thank you for your nice comment and of course for watching!

@uncletom1971 4 года назад

I have given you a thumbs-up.

@TeamIngel 11 лет назад

Yes, it will work. You will also already have the better shocks. Thank you very much for watching and for your comment.

@danielemulazzi7309 4 года назад

Gran lavoro di precisione... Complimenti

@TeamIngel 11 лет назад

I changed the shocks to Tamiya item no. 50519 and I changed the main driveshaft to the aluminium-version. That's all I upgraded on my TT-01. Thanks vor watching!

@vgtg16 11 лет назад

Very nice video. Thank you

@TeamIngel 11 лет назад

Thank you very much! I'm glad you liked it!

@TeamIngel 11 лет назад

Sounds great, so I will do some tests with heavier shock oil next time. Thank you!

@mabadood3000 11 лет назад

Cool thanks for the response.

@TeamIngel 11 лет назад

You can use a simple hobby-knife. The parts to cut on the lower skidplates are made of very thin plastic. Also there should not be a problem at the differential hubs. Thanks for watching!

@khaymahv4027 5 лет назад

Excellent tutorial 👍👍👍

@TeamIngel 11 лет назад

Yes, they work fine!

@giovanni1717 10 лет назад

Very good tutorial!! now im ready to snow rally :D danke schön

@TeamIngel 10 лет назад

Thank you very much and have fun with your rally car!

@TeamIngel 11 лет назад

I'm using Tamiya CVA-Shocks. The Tamiya parts number is 50519 (you will need two sets). Try to buy them off ebay or maybe you have a hobby-store nearby.

@TeamIngel 9 лет назад

+Antuan Perez For some reason I can't reply directly to your comment. So I'll try it this way. As far as I know, you don't need to do any modifications on the TT-02, because it is available in a rally version. But I'm not shure if you can build any kit in rally setup or if you need some extra parts. Maybe this thread on R/C-Tech is a little helpful: www.rctech.net/forum/electric-off-road/828544-tamiya-tt02-tt-02-rally-off-road-thread.html Thanks for watching!

@modwlego 9 лет назад

What dampers are you using?

@dj4monie 8 лет назад

+modwlego Tamiya CVA's with Yellow On-Road Touring Car Springs

@TeamIngel 10 лет назад

Thanks for watching, leaving a comment and for your kind advise!

@TeamIngel 11 лет назад

Hello Ethen! I found some Tamiya TT-01s on ebay sweden with prices between 990 kr. and 1300 kr, (115 - 150 €). Thanks for watching!

@philrc1410 8 лет назад

Danke für das Tutorial

@ReubenHorner 10 лет назад

very good, would of been good if i had access to this like 2 years ago, haha

@TeamIngel 10 лет назад

Thank you very much! Why you needed this video 2 years earlier?

@ReubenHorner 10 лет назад

TeamIngel because that is when i turned my tt-01 to rally style and it would of been much easier to just watch this than scouring all of the tamiya fourms hah also it might be good to say that you should get some large soft tires and a brushless motor combo 2

@pastimesteve 11 лет назад

Hi! No, your English is perfect! Thanks again, Steve

@HighVoltsEntertainment 9 лет назад

Great Video I have a TT-01 and did a rally conversion myself but didn't know about the Diff hubs! Thanks for the Info I love your channel Keep up the great job!!!

@changchufeng8340 9 лет назад

TT01 is one of the best chassis to do conversions :D I have a tt01 with a full drift conversion, it was not really hard tho just need drift tires and lock the diff and that's all haha

@HighVoltsEntertainment 9 лет назад

Sweet Thanks Man

@TeamIngel 9 лет назад

HighVoltsRC Thanks a lot! It's nice that my videos can help a little bit!

@TeamIngel 9 лет назад

chang chu feng That's exactly what I did with my TT-01 and the result is a very decent drift car, which is easy to handle. Thanks for watching!

@HighVoltsEntertainment 9 лет назад

Yes it helped for sure! And awesome I have locked diffs so all I need is drift tires and I have a whole new car! Thanks guys!!!!

@BadShoppe 10 лет назад

TeamIngel: great video! a friend sent me the link and i like how you were able to achieve the rally setup :D i will for sure try this on at least 1 of a few TT01's i have :D

@TeamIngel 10 лет назад

Thank you very much! Great, if my videos can help a little bit!

@Danishhorror 11 лет назад

Thks!

@TripleXmodder 11 лет назад

More tutorial videos. Best on the Tube. !!!

@DCRlive 11 лет назад

nice job, great invention. thanks for sharing

@RatteGonzales 11 лет назад

really nice car! That would be my next project i would like to build a remake of the Ken block ford fiesta!

@BenThePsychoGamerT 10 лет назад

awesome vid thanks for making it i was trying to find a vid for making mine more suitable for rally

@TeamIngel 10 лет назад

You're welcome and thanks for watching! I'm glad that my video will help you a little bit.

@qcustomz 11 лет назад

great tutorial keep up great work

@Rebecca_The_Dragon 10 лет назад

How does this compare to the performance of the XV-01 Chassis? Im trying to make a decision on what to buy

@TeamIngel 10 лет назад

I think that the XV-01 is more suitable for offroad driving, because this is what it was designed for. But it is also a lot more expensive. I never really had any problems with my TT-01 when driving it offroad, it's a very reliable chassis. Thanks for watching and for leaving a comment.

@TeamIngel 11 лет назад

I thank you for watching!

@ThatRoadCyclistUHate 11 лет назад

The stock and after height is way more than what you said because the botem of the ruller did not stat on zero

@TeamIngel 11 лет назад

Thank you very much! I really appreciate this!

@emielvb 11 лет назад

really awesome!!!

@TeamIngel 11 лет назад

Oh, yes, you are right, what a silly mistake! But at least you can see the difference between before and after! Thank you very much!

@TeamIngel 11 лет назад

You're welcome!

@TeamIngel 11 лет назад

Thank you very much!

@TeamIngel 11 лет назад

Wow, thank you very much!

@takeii7173 10 лет назад

Nice clean work!!! Keep doin what you doin! Big upz

@TeamIngel 10 лет назад

Thank you very much!

@TeamIngel 11 лет назад

I don't know if I would use a TT-01 D for rally-driving, because it's more expensive then the standard-version. The friction shocks have the same length as the CVA-Versions, so I would give them a try!

@theyatsyspam 11 лет назад

Ok, cool. Thanks for the response. And the video! Really informative, I've been looking for something like this for a while :) cheers.

@modwlego 9 лет назад

May I ask, what brand of shocks are you using for the setup?

@timothyma7298 10 лет назад

Thumbs up!

@pascalfritz4176 9 лет назад

Cool i like thé body ans your vidéo really helps

@TeamIngel 9 лет назад

Thanks a lot, I'm glad that my video helped a little bit.

@InvictousDubstep 9 лет назад

What shock dampers do you have on this setup and where did you get them from? Im trying to do the same to my car, good tutorial btw

@jaxkdyson3677 11 лет назад

Brilliant video, helped a lot. One issue though, i'm english, and think you speak english better, and with more diction, than english people :|

@isi3297 7 лет назад

heelo. great video, but i have a problem with this conversion. I have done all the steps and it seems that my car is braked... the wheels rotate slower....how can be that possible??? :( my dumprs are 68 length

@nakazatoGTR 8 лет назад

Hi, TeamIngel, It has been a loooong time since you were part of my inspiration to "rallify" my TT01 Plastic tub version, then my HSP/Exceed/Redcat "Driftstar" aka Flying Fish,[a mirrored clone of the HPI maverick Strada] and not a TT01 with Carbon Chassis. I sold my plastic tub TT01 because it was time to grow... i then had the HSP Flying Fish, which was 200mm(i have had problems sourcing a Rally based 200mm bodyshell) i then upgraded my Flying Fish with metal Arms and Carbon Fiber chassis i also have the 3racing upgraded TT01... Nostalgic! but do you think it is ok to cut out the same areas for increasing ride height?

@keithwilkinson5759 11 лет назад

where did you get them shocks i did all thisto my tamiya and im now limited by my shocks

@timothyma7298 10 лет назад

You can just buy a yeah racing diff hub, as a kind advise.

@theyatsyspam 11 лет назад

Do you think it's necessary to create an internal body shell to keep dirt out? I've followed this video for the suspension but I still have concern for the driveshafts etc.

@RcNerds 8 лет назад

What is high of those shocks?.

@tudorpavel4681 4 года назад

HI! Great video! What's the lenght of the suspensions?

@supreme3376 10 лет назад

How did you cut a driveshaft cups ? Have you tried a higher shocks dampers i will be going with a 65 mm.

@TeamIngel 10 лет назад

I cutted the driveshaft cups with a dremel, but you can also use a knife. There are already 65mm shocks installed in my TT-01, I forgot to mention this in the video. Thank you very much for watching and for leaving a comment!

@creatingthings9312 7 лет назад

TeamIngel what knife?

@antonaguilar6780 11 лет назад

What did you change to upgrade the tt01? Only shocks? Please reply thanks...

@seankwon123 11 лет назад

so you use the cva shocks? and if you do, where do you get them?

@rubenbothma5111 7 лет назад

hii teamingle....what did you do with the steering arms to get the front so high

@BenThePsychoGamerT 10 лет назад

oh what does this do to make the chassis rise necessarily

@ayske1 10 лет назад

Have you used it for an off road track? Have you ever used anything other than the rally block tires?

@TeamIngel 10 лет назад

Hello ayske1! No, I haven't used it on an offroad track so far. Just bashing around in a sand pit. But I have used other tires on it. In my video "Early Morning Rally" I used onroad tires. They are ok, but nothing compared to rally blocks. Thanks for watching!

@happiman9484 10 лет назад

Is TeamIngel a actual team or is it just the channel i live in the U.S. of A. so i wouldn't know

@TeamIngel 10 лет назад

Yes, Team Ingel is a team of myself doing all the filming and editing and different "guest drivers" in my videos.

@brandondavis-white3352 10 лет назад

Great conversion there. I'm making my Tamiya TT-02 into a rally car but I don't know what type or weight of shock oil I need. I have heard that it needs to be soft to Handel the bumps better that stiff oil. Can you help?

@TeamIngel 10 лет назад

You're right, you will have a better performance with a softer setup on rough terrain. I'm using soft springs and a soft shock oil at the moment. But you can also try soft springs and a medium shock oil if you have problems with jumping. Thank you very much for watching and for leaving a comment.

@brandondavis-white3352 10 лет назад

Thanks for tips

@seankwon123 11 лет назад

ok, thanks a lot, I've subbed to you, and I think you'll be a great help for me while starting out. :D Oh, one more thing, everyone says the friction shocks are too stiff, do you know if that's true?

@joelbrown1510 10 лет назад

how is the road holding on this rally car as the road holding on mine is s**t but mine is a ta02

@ronnietjikoeri9965 8 лет назад

is it possible to lower the car again without buying a new skidplate ?

@creatingthings9312 7 лет назад

ronnie tjikoeri yes Use the yeah racing oil filled shocks they are adjustable but when I use them they can't full extend down even with the skid plate off

@seankwon123 11 лет назад

thanks so much for all your help, but i have so many more questions... XD Anyways, Do you think it would be fine to get the tt-01 drift version and modify that? Also , do you think the normal friction shocks from the tt-01 e is okay for rallying?

@happiman9484 10 лет назад

is the tt-01 chassis same as tt-o1e chassis and if they are what are some good tires for making it a rally car

@TeamIngel 10 лет назад

The chassis are basically the same. The only difference is an upper deck in the TT-01E. I have not tried many different rally tires, but I think the ones from Tamyia are ok but a little stiff. The tires from HPI are a little bit softer. There are big RC-Rallys held in the Czech Republik. As far as I know, they are all driving tires called "ARP Rally Block", which are looking like the ones from Tamiya but they are very much softer. Thanks for watching and for leaving a comment, I really appreciate this.

@TeamIngel 11 лет назад

Yes, a penknife should work.

@emilioesteves8685 9 лет назад

What's is a good gear ratio for the tt01 as a rally car. Thanks for the tatorial on this car.

@creatingthings9312 7 лет назад

Emilio Esteves I'm guessing for my tt01 right now it's 24t:55t spur and pinion But you'll need a fan I am using a sport tuned motor and sometimes it just gets to hot

@seankwon123 11 лет назад

Was this stock on the video?

@creatingthings9312 7 лет назад

Well I did I made it into a buggy I made a diy buggy body and removed the skid plate made some diy protectors for the skid plates covers for the drive shaft and used a 55t either the pinion or the spur idk it was on 17:55 I guess the 55t I'm very sure about it but the 17t not so but well I guess I need to buy a fan lol I just don't have long wishbone suspension arms lel but works fine tho

@Danishhorror 11 лет назад

What type of knife u use?.Pls reply.TY

@Danishhorror 11 лет назад

A penknife?

@mabadood3000 11 лет назад

Will this work for a TT01D?

@maxi4377 11 лет назад

will it work with the TT-01 type E

@BenThePsychoGamerT 9 лет назад

this did not work for me i used a serrated butchers knife and a tiny unserrated pocket knife since i could not find a penknife

@utegrabben 11 лет назад

i Think it chost on ebay 120 $ ??

@tomdircks2290 9 лет назад

hello everybody, I have a KYOSHO ALPHA 3 PURE TEN EP. I want to make it a rally car like the video, but it's not a tamiya tt-01. Can a person help me please?! Gr. Tom

@BenThePsychoGamerT 9 лет назад

what knife would you recommend serrated or any other types

@dillanpoling4497 5 лет назад

I found a Dremel cutoff wheel. But you can use an exacto knife and just score it over and over once you are most of the way through just cut with scissors and it will split on the cuts. Hope that helps.

@rcz2523 9 лет назад

hey TeamIngel, i really need help, i cut the skid plate like you did, but it makes no diffrence, im using stock shocks, do i need diffrent shocks like you have? someone please help

@rcz2523 9 лет назад

or diffrent tires?

@modwlego 9 лет назад

The stock "shocks" that come with the TT01 or the TT01E only allow the vehicle to be at the height that the uncut skid plates allowed. To make your car raise you need higher coil overs.

@rcz2523 9 лет назад

modwlego can you suggest any shocks, mabye an ebay link? thanks

@modwlego 9 лет назад

I'd love to recommend some, but I've recently done the modification myself and have no idea what brand to use myself.

@TROJANP 11 лет назад

YOU ARE SOOOOOO SIKKKKK !!!! thank you you saved me good bit of pounds lllolll

@maksymilianukosz2284 6 лет назад

Stock electric ?

@suchenderw9890 3 года назад

norm14?

@nameunchanged7162 10 лет назад

hi if I do these mods would it still work with a sway bar

@TeamIngel 10 лет назад

Hello! I'm not completely sure about this, because I have no swaybar installed. I think you will be still able to mount it, but I don't know if it will work like before. Thanks for watching.

@nameunchanged7162 10 лет назад

TeamIngel ok thanks