Reconfiguring A 427 LSX From Naturally Aspirated To Supercharged - Engine Power S8, E8

Подписаться 1,6 млн

Просмотров 400 тыс.

50% 1

We reconfigure our racy 427 LSX from naturally aspirated to supercharged status to make big boosted horsepower! #LSX #EngineBuilding
Check out the PowerNation store for shirts, hats, and more: bit.ly/39LkvsF
Want to watch POWERNATION completely ad-free? Subscribe at the link below and receive the first month for just 99 cents: bit.ly/2DuRILC
Follow POWERNATION Everywhere:
www.powernationtv.com
/ powernationtv
/
PARTS USED IN THIS EPISODE:
Fitech: Ffitech Ultimate LS Standalone ECU Kit
More Info: pntv.us/pn_pt_17038_60705d70ea78f
Race-Gas.com: Race Gas Fuel Concentrate
More Info: pntv.us/pn_pt_17040_607063014f98a
RockAuto.com: Automotive Fluids, Lubricants, and Tools
More Info: pntv.us/pn_pt_17041_607063a5eff9d
Summit Racing: Pistons
More Info: pntv.us/pn_pt_17034_60705ae72f361
Summit Racing: AC Delco Water Pump
More Info: pntv.us/pn_pt_17036_60705b923cc26
Summit Racing: ATI Super Dampener Harmonic Balancer
More Info: pntv.us/pn_pt_17035_60705b3ee8100
Summit Racing: Cometic Intake Gaskets
More Info: pntv.us/pn_pt_17033_607059e95d962
Summit Racing: Earl's Performance Plumbing Adapters
More Info: pntv.us/pn_pt_17039_60705dce30d83
Summit Racing: GM Accessory Kit
More Info: pntv.us/pn_pt_17037_6070645a90681
Summit Racing: Magnuson Supercharger
More Info: pntv.us/pn_pt_17032_6070592f2b905
Matco Tools: MATCO Tools are the Official Tool Supplier to PowerNation
The Industrial Depot: Tools, Hardware, Shop Supplies

Авто/Мото

Опубликовано:

3 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 297

@LS1NNOVATIONS 2 года назад

I'm just amazed that 6 rib belt isn't slipping hardcore. That factory tensioner is the true hero of this story.

@petercacchioli319 2 года назад

I just had one of these added to my 6.2 LS. 200 HP addition.

@MrUltraworld 3 года назад

Nearly 800hp on just 6lbs of boost! Big power that's going to last.

@brendentosto5640 3 года назад

It’s mostly due to cubic inch, the more cubic inch the less boost it will make. If this blower were on a smaller inch LS it would probably make 10 psi.

@darrenroot4562 3 года назад

@@brendentosto5640 not only that, but it has high flow heads and a big cam

@robertcranwell7847 2 года назад

This is a built 427 it should make that much power, Raceprovenmotorsports has a video with a 6.2 on 8lbs of boost making this much power.

@civic2980 2 года назад

How about not ruining the video in the first comment. Jackass

@177SCmaro Год назад

There is something to that. I'm almost 600hp with a turbo Coyote on 5-6psi with the stock cams and heads. Even dropped compression to 9/1. I think a lot of it has to do with nearly 300cfm from those 4 valve heads.

@ericadams4226 3 года назад

I love how Pat thinks of the details in real-time by adding 2 psi of boost and using a smaller pulley to milk some extra ponies outta the LSX!

@thespicemelange.1 3 года назад

Zip tie moments brought to you by PowerNation.

@1320Jason 3 года назад

That’s so roadkill!! Haha

@chandlerlofton6536 3 года назад

So glad y’all showed the supercharger guys some love!

@sean5comet 3 года назад

Pulley swap away from 900hp if you get 9psi out of that supercharger. It can easily go up if need be. High hp with the lower boost is nice though, probably last longer and be more street friendly.

@f1y7rap 3 года назад

OK, with that dad joke, I would LOVE to work with Pat as a mechanic

@franktaking 3 года назад

Keep doing these engine build videos I am enjoying it

@AW-xv7dq 3 года назад

Perfect timing on this!

@alexjuarez1247 3 года назад

That’s awesome i agree we need more build videos like this

@godzillasballs 3 года назад

they did good by having this young guy as the co-host

@yieud Год назад

Seeing you guys use the fitech system makes me super excited to see what mine can do, I have a 03 lm7 with a complete fitech system

@johnsmith-qz4bv 3 года назад

great work guys

@charleshenshaw9099 2 года назад

Great job on this project.

@timeless6964 2 года назад

Sounds Great!!!!.........This IS, What I Need!!!

@robertkerr4199 3 года назад

I miss building engines. Lost my arm in a motorcycle accident. Please don't text and drive.

@robertkerr4199 3 года назад

@@bigboreracing356 you're a real hero

@carlrice6989 3 года назад

OR drink and drive,,, Not worth it,,, sorry to hear of your Loss,R Kerr,,,

@P71ScrewHead 3 года назад

find out if you can have another attached to your body bro, its possible now..

@MeatMarksman 3 года назад

It’s not impossible to do though. My families backyard mechanic has only one functional hand. With the occasional assistance, he does everything automotive. Mind over matter.

@king0cans 3 года назад

My old lady is missing parts too. Don't slow her ass down. Smoke a joint and worry less man.

@DanielOrtegoUSA 3 года назад

An excellent video was beneficial information.

@alejandroherrera5271 3 года назад

I love Pat's dad jokes. Totally stealing that one!

@Timberwolf69 3 года назад

If Marc ever needed any motivation to finish that project, this definitely does the job...

@shanecloyd6646 2 года назад

I'm from a GM Family. My late dad plus he was a WW2 Navy vet, my late brother, and my late brother- n- law he was a Vietnam Veteran. My dad worked at Delco Battery, Muncie Indiana, my brother and brother- n- law worked at Fisher Guide, in Anderson Indiana. They would be proud of those awesome new Chevrolet power plants.

@craigcontofalsky4387 3 года назад

Get it installed!!!

@ralphhaldermanjr5926 3 года назад

I need that motor in my 1980 Z28 camaro

@raylaux8295 3 года назад

motors are electric, cornfused you are

@ralphhaldermanjr5926 3 года назад

Really this early in the morning with BS you could not say nothing nice

@mr.serrano4267 3 года назад

Can you guys do some daily driver builds using 87 octane?

@michaelbannan9972 2 года назад

For real. As cool as it is to see the big numbers, knowing they're using a really high octane race fuel makes the point moot. Most people aren't using race fuel in their builds unless it's a full on track car.

@midnight347 Год назад

@@michaelbannan9972 trying to build high hp with low octane fuel just isn't smart. That is a quick way to blow shit up trying to push things on low octane.

@midnight347 Год назад

87 octane doesn't have any business near a big power boosted setup.

@nonameavailable7914 Год назад

Pat is our hero

@glenstokes3970 Год назад

Good job fellows

@willkincaid5841 3 года назад

I remember when I was kid using all hand tools and tuning by vacuum or by other means afr gauges work good for both N/A and boosted applications.

@willkincaid5841 3 года назад

And they didnt cost a you a grand.

@franciscovasquez4555 3 года назад

One killer build, wish that was going into a trailblazer SS AWD

@bethanyhaskiell9116 3 года назад

That's what the trailblazer ss should've came with from the factory

@yungtooli 6 месяцев назад

@@bethanyhaskiell9116 no too much

@lawrencefoster2120 3 года назад

Wow that engine.

@war_moose5814 2 года назад

Have to love the dad jokes!

@samuelbyrd4923 3 года назад

I would really love to see these guys do a Gen 2 LT1 build

@Ballen1182 Год назад

I wish they would make an ls style intake for those.

@brianbingham5152 3 года назад

Rock auto doesn't have all the parts you need. It all depends on what vehicle you are working on and what year it is.

@_JoeMomma 2 года назад

when rock auto doesn't have my 1901 model T brake pads... smh

@CanadaBud23 3 года назад

Tire fryer would be an understatement. Would be more like tire vaporizer. If you manage to get even a fraction of that power down, that motor in an XJ would absolutely destroy everything from Chrysler. More power at literally half the weight.

@TheBibleExplorer 3 года назад

🥺 O' now I want one in my TJ or XJ... but...😱 it cost more than both of them together 🥴... 🤔 That's going to be quite the sleeper XJ you all have got in the works over there 😁👍 😊 Can't wait to see it hit the track for the first time

@OpenRoader 3 года назад

Ear to Ear smiles!

@PhillyDee215 3 года назад

Supercharger is the only way to go in my book😉

@THROTTLEPOWER 3 года назад

Very cool!!!!!!!!!!! 💪👍🙂

@tjh44961 3 года назад

Pat's Dad jokes kill me!

@joshhope9287 2 года назад

Pat is my homie!!!!!!!!!!!

@mindeloman 3 года назад

"After the AMC fans brought out their pitchforks and torches, Detroit Muscle wisely decided to use the 304." Damn straight! Far too many, "went with a LS engine," builds. Even if it's a LSX, putting a GM engine in an AMC heresy. From my vantage point, only AMC should go in an AMC. And I would be totally behind a punched-out and/or stroked 401. Because AMC was the "little car company that could," and to use anything but AMC is disrespecting the legacy. AMC fans are a loyal crowd and will always pull for the underdog.

@bmstylee 3 года назад

Yes because being slow is cool.

@Heffelz8 Год назад

Came for the engine build, stayed for the awesome dad jokes.

@dragonsbreath1984 3 года назад

That 427 would have gone better in my 85 El Camino sleeper.

@kevinglunz6608 3 года назад

You just cant beat good ole GM power. Best engines out there. Ls and sbc.

@aaronmcconkey1062 2 года назад

Id hope they would know how to make a sohc v8 at this point.

@midnight347 Год назад

They aren't the best engines out there but whatever lol. Coyotes and condor/trinity v8 4v fords and 03-04 cobra 4.6 4v motors all can make big power with just boost on a stock long block with way less cubic inches than the 7 liters shown here. Doing it with 4.6, 5.0, 5.4 or 5.8 liters max is dope. Dohc + boost is like a cheat code. This thing is a built highly modified 7 liter lsx.

@Twankiejones 2 года назад

Need some larger diameter headers I believe, them glowing makes me think there to much back pressure. Not completely sure because of I’m basing from a turbo engine but to me it makes sense still with this being a boosted application

@JordysRailVideos Год назад

7:53 nice dad joke Pat

@TheBakoman5 3 года назад

awesome show. Would like to see ya build a 450 with over 1100 bhp like the one teans am world wide made as tribute to their father

@dainielponce1006 Год назад

Me gusta mucho este programa . Kisiera gue estos capitulos fueran en ESPAÑOL .

@johnkuhn7835 3 года назад

Soooooo cool 😎

@adanmota777 2 года назад

I want one of those.

@georgew.5639 3 года назад

Now it’s time to beef up the trucks frame, suspension and drive line to take all of that torque and horsepower. That engine makes enough to tear it apart.

@ShawnGilbert1967 3 года назад

Looks like the smaller pulley gave it belt slip or couldn't keep up...the first run didn't have that power dip from 6500-7000.... It may have been in the springs as well but looked like slip...

@Ballen1182 Год назад

How can a man be a ford guy when GM has all these badass ls engines?? Perplexing.

@eskieman3948 Год назад

Because you're not paying attention. A Ford Coyote engine crushes this "badass" engine. Think not? Check their video.

@bobdavis3389 2 года назад

I want this for my 65 Corvette Coupe !

@francoisd6942 3 года назад

It would be nice to see a 4.2-liter Atlas LL8 built to race like Falconer did

@samuelriester1419 Год назад

You should have gone full party pulley, I wanted to see the coyote you all built versus this with the same boost to see if the two liters or four valves was worth more power!

@davidlefranc6240 3 года назад

when i saw the canadian logo on the pulley at 8min15sec i was like yep better than made in china for sure!!!!

@utahcountypicazospage5412 2 года назад

always liked at least 10 to 1 compression with a boosted application because I can keep boost low and make great power.

@midnight347 Год назад

I mean at the end of the day cylinder pressures are about the same either way weather it's higher boost lower compression or visa versa. It might keep iat down and make recovery time better and be easier to cool the blower but I don't think it's really much better on the engine itself but at the same time some blowers don't like to be ran at such low boost and perform more optimally at a higher boost level. Each blower has an efficiency island that you should try to stay within for best results and not go under or over that.

@shannisgeorge 3 года назад

U should have put this in that surburban build

@trickyrickie4828 3 года назад

Hey Pat when are you going to put that Mopar on the dyno

@singletonperformance5473 3 года назад

Did I miss it!!! What happened with the timing change when the charger got bolted on..? Didn't stay the same as aspirated I'm sure..... Right??

@fordfairlane662dr 3 года назад

So were is the reat of the javelin build series?

@bigal878 3 года назад

I’d love to see that with 10 PSI boost. 👍🏻

@jamieschinkai1267 3 года назад

It would make about 875hp. It adds 22.5 hp/pound, with 650 as it’s normally aspirated base line. 650+225=875. All this considering the blower could even move that much air in the first place.

@Matthew-wn8oq Год назад

I want to buy that Jeep! Does Power Nation ever sell any of their project vehicles?

@dadgarage7966 3 года назад

@ 8:06 Made in Canada.

@mm2024-7 2 года назад

That is one expensive build. But very nice! 🙂

@stevesolo16 2 года назад

I think this proves two senerios. First, if you are building this for racing, go with a turbo charger. Second, the supercharged engine would be great in a street car, and there are different pulley combos to fine tune your engine.

@thetreblerebel 3 года назад

Heat exchanger? Intercooler..maybe?

@maxmaijor 3 года назад

on 19.34 the big turbo dip, as many as 6-7 sec,....uhhh... develop new, 4-valve cylinder heads

@TheJeracuda 3 года назад

one thing I don't remember you people ever really discussing is what type of oil do you use in these high horsepower builds. Do you use just a normal oil like a Pennzoil that's rated for high hp or do you use a synthetic oil such as amsoil?

@square348apple3 3 года назад

They run royal purple I have seen it in some vids

@Carlos.Rivera 2 года назад

Race oils

@cowboystuff2002 3 года назад

I have a question. When you talk pump gas, does it contain ethanol or is it ethanol free pump gas???

@rroy8049 2 года назад

Can you readjust the necessary changes to put this build into a boat

@rickycortez6733 3 года назад

Can someone explain the 900 pens 🖊, cell phone, and glasses in his shirt pockets. Oh and don’t forget the tap measure to complete the Bob the Builder outfit 🥸

@danhambrick6331 3 года назад

That's why I call him Pocket Protector Pat....😂😂😂😂

@rickycortez6733 3 года назад

@@bigboreracing356 LOL didn't even catch that when typing.

@danhambrick6331 3 года назад

Are they gonna put that Beast in that Jeep XJ?😁😁😁

@bmstylee 3 года назад

It needs to go in a Tesla to piss off people who think they are saving the environment.

@40calDeathPunch 3 года назад

Yes forcing the air up making it have a longer path of travel creates more HEAT. The enemy of any performance engine.

@Ningagato 3 года назад

Im no super charge expert or engine expert at all but im pretty sure that blower or every blower has a heat exchanger inside. Thats why they put that external radiator to cool the heat exchanger inside the super charger

@susiedyer3260 11 месяцев назад

Yes rock auto parts store is awesome AF and u can get ur parts really cheap but the shipping is where it will unalive ur wallet I bought a grill 4 an Oldsmobile paid 75ish 4 the grill but paid 61 bux just 4 shipping now know this I am NOT throwing any shade at rock auto cause they r awesome AF just need 2 figure out how to lower shipping costs

@richfarfugnuven6308 3 года назад

What happened to the other guy with Pat? I think it was Mike Galley...

@billk9628 2 года назад

As my ole Boss always said, "Ain't nothin that money can't fix" ! Why would anybody do this much for a 100 plus HP!? Funny thing is, I beat the crap out of supercharged vettes, in an LS1 powered RX7 that was stock! So, "THINK" about your bank role, and think about how to use it, because this ain't the best way! First worry HP to weight! Whatever you think, will kill your car before you even build it!

@MarkEvans72400 2 года назад

What’s that entire set up cost ?my c5 2002 would love it

@fuckoff898 8 месяцев назад

I missed the compression ratio of the engine?

@billflk2364 3 года назад

Hey Pat, what do you call a cow with a twitch?, Beef jerky. Lol

@bmstylee 2 года назад

Ok. I'm taking that one.

@darrenporsch 3 года назад

Never heard anyone say pound inches I always heard inch pounds sounds a little weird

@blown572hemi Год назад

Amazing when you consider 376ci puts out 707hp and you lose 400hp on other boost. You hit the target tho and it only cost a small fortune. Good infomercial never the less.

@leonardwalters154 3 года назад

It's killing me, so few episodes on the javelin, we need a update on what happened to it!

@leonardwalters154 3 года назад

@@bigboreracing356 I agree, gm products don't rule hot rodding

@bmstylee 3 года назад

@@leonardwalters154 it was on TV. A God awful paint job and a ridiculous looking stance.

@meatybtz 3 года назад

the biggest issue here is that no one makes "new" products for AMC engines. All the product lines have not been updated or re-engineered for the last 30 years. Powernation works off manufacturers giving them parts to hype. There is just no money in AMC. And this is coming from a real AMC fan. I've owned and raced Javelins, Rebels, Matadors, the works. I've built AMC engines that do go fast. But the reality is that engineering for ICE's has come so far from AMC that it is crude and limited. A lot of engineering advances have been "backported" to the Chevy 350 (the classic small block) and GM continues to build newer and better engines.

@umakemerandy3669 3 года назад

7:50 best part..... geeeez. Whyyyyy

@sihartobing9570 3 года назад

Power Nation*🌠 Engineering Workshop _ Best 🌠👍👍👍🌠🌠🌟🌠🌠.

@boostnhoe 3 года назад

They said the motor made 647hp all motor 19:05 min into this video. Then they bought a $7k supercharger not including accessories and only added about 140hp? Seems Waste of money. The dollars don't make cents.

@robertcranwell7847 3 года назад

It's a 427 that's built up from a previous episode, adding Octane booster to 93 and with the 2650 supercharger they should be hitting 950-1K Horsepower. They could hit 785HP with a built 6.2 IMO. Race Proven Motorsports does this all day on their channel.

@Parents_of_Twins 3 года назад

Isn't inch pounds or pound inches the same thing and you divide by 12 to get foot pounds or pound feet?

@bombombimbim440 Год назад

Is this same as LS7 corvete engine??

@papilloncycles3463 3 года назад

Wow

@genemounce8302 3 года назад

On the street, you'll need 12lbs of boost to equal those numbers on 93..... js

@noahpelletier3871 3 года назад

Peep the 300 inline six they haven’t gone back to in such a long time :/

@1320Jason 3 года назад

Tire fryer. 😂

@jasonandrews457 3 года назад

mixing fuel to run 6 psi ???

@bossjoe3 3 года назад

Do you have a show about the newer dodge charger

@bmstylee 3 года назад

They've done a Challenger with twins. Not sure about the Charger.

@JerkVegas86 3 года назад

Does race gas with no tune for it do anything for your car?

@HypocriticYT 2 года назад

Could have put it in my 2002 Camaro SS. Engine is all stock

@markdonovan9247 2 года назад

👍👍

@Hawkers02 3 года назад

The bald eagles have flew

@matthewbrown1760 3 года назад

Nice but that setup wants at least 15lbs of boost, need a different Supercharger then you’ll see 1200hp easily and still comfortable.

@BIGGIEDEVIL 3 года назад

You build it and show us all how its done until then watch the show and don't critique it

@stevenbelue5496 2 года назад

I agree if that supercharger was any smaller it would be a restriction. That 427 is breathing some air naturally and needs something adequate to take advantage of what that engine has to offer. 4 to 6 lbs for the price of a magnuson, just not worth it, not much over NA. That SC would be more at home on a 6.0,6.2.

@midnight347 Год назад

@Steven Belue they could push alot more boost than this bro it doesn't need a bigger blower just smaller pulley