Repair a Damaged EPDM Rubber Roof- No More Leaks! (Easy How-To)

Подписаться 4,3 тыс.

Просмотров 41 тыс.

50% 1

In this video you are going to see just how easy it is to repair a small area of damage on your EPDM Rubber flat roof using one of our Patch Repair Kits.
Has your roof sustained a tear or rip perhaps resulting in a leak?
With your Rubber4roofs repair kit on hand this won’t take you long at all!
www.rubber4roofs.co.uk/shop/e...
You will see how to repair your roof in just 5 easy steps:
-Clean the area and measure the patch.
-Cut the patch to size.
-Prime the area using R4R primer.
-Peel the backing off the patch and stick down to cured primer.
-Ensure good contact with the seam roller to finish and provide a strong lasting repair.
We hope you find this video useful. Leave a comment to let us know how your repair went.
Please visit us at www.rubber4roofs.co.uk/ to see all of our products.
➢www.rubber4roofs.co.uk/
➢ / rubber4roofs
➢ / rubber4roofs
➢ / rubber4roofs
➢024 7666 7234
IMPORTANT NOTICE
No responsibility or liability is accepted for the information provided in this video. You are responsible for your own health and safety. Activity with our products whether at ground level or at height is entirely at your risk. If you are an employer you must protect your workers and others from getting hurt or ill through work.
#rubberroof #diy #roofing

Хобби

Опубликовано:

17 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 13

@everhardproducts Год назад

Nice looking seam roller! 😍

@akashchandragautam4575 Год назад

Also please tell which glue to use if not bitumen to stick epdm rubber on terraces

@bradleyphilipprice334 Год назад

Are Your Products Available in Surrey, British Columbia, Canada? I would like to add three new downspouts. I need 3 Drain Outlets & Instructions. How big should the round hole be? Thank You

@freddytait7726 3 месяца назад

No sticking down the insides of the slit? Is this same for bubbles?

@beardedpianist 2 года назад

You have given me bonding adhesive for my roof. Is this the same as the prima you mention, or do I need to buy again for patch work? I also have the supplied soft seam roller; I'm guessing the silicon seam roller is needed for repairs too?

@Rubber4Roofs 2 года назад

Hi Michael, the contact bonding adhesive and waterbased deck adhesive are both for the main rubber membrane. The uncured flashing tapes do require a separate primer normally supplied in a small 250ml tin. If this hasn’t been supplied please give the office a call on 02476667234 and they will get this out on the next delivery for you.

@akashchandragautam4575 Год назад

Sir please tell me if we can use liquid bitumen to stick epdm sheet on roof tops

@Rubber4Roofs Год назад

Hi Akash Epdm is not compatible with Bitumen products unfortunately. What substrate do you intend to stick the membrane to?

@jaimebenitez3208 2 года назад

Thanks for this. Question. Is adhesive only when bonding to a deck or iso? Is primer only for use on existing epdm?

@Rubber4Roofs 2 года назад

Hi Jaime, the water based and contact adhesive is only used for adhering the membrane to the deck or insulation. The primer is used in conjunction with the EPDM tapes, for example your flashing tapes, or joining tapes.

@jaimebenitez3208 2 года назад

@@Rubber4Roofs thanks pal.

@joechampagne4714 Год назад

You need to lap seal your patch’s people also you need to clean the area with a cleaner before applying your primer and your patch does not need to be that big that’s a waste of material you only need to have 2inch of coverage around your whole

@thinice9000 9 месяцев назад

Agree on the lap seal when youre done and the cleaning and the patches. Where im at need to be at least 3 inches. (also its supposed to be cut out from a 18inch roll also called curb flashing which you can make couple patches out of one cut off the roll. from firestone now called elevate roofing products.) skill isnt cheap and cheap isnt skill