Тёмный

Rust-Oleum RockSolid Garage Floor Coating Review & Tips! 

Dillan Fisher
Подписаться 597
Просмотров 6 тыс.
50% 1

I wanted to make this video to help others out that made the decision to put this on their garage floors without issue! As I said in the video I ran into some coating issues and how thick to lay the epoxy. I reccomend twice the amount that is stated on the box for thick and smooth coverage and to not use a ton of chips. You can get an awesome professional look with this product with the right knoledge and steps taken, prep is everything! Hope this helps some of you looking to do this to your garage!

Опубликовано:

 

20 июн 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 13   
@tamir5940
@tamir5940 2 года назад
If I use the rustoleum concrete primer… you think that would help me with the end result looking better?
@DillanFisher
@DillanFisher 2 года назад
I definitely think so. The reason so many people say to buy double what you need (which I still recommend) is because the concrete absorbs so much initially when you start to lay it down. If I was to do it over Id definitely would degrease, etch, fix the cracks, then lay my primer and then the rocksolid ontop within the primers allotted time. You will get a much more uniform finish and less headache.
@tamir5940
@tamir5940 2 года назад
@@DillanFisher Thanks for the reply. Yeah I figured so that you would need a primer. I ended up getting a kilz brand concrete primer but then found out from my local paint store that the epoxy kit wouldn’t stick to it so I ended up returning it. I then found the rustoleum brand concrete primer so hopefully that will work. Fingers crossed 🤞
@DillanFisher
@DillanFisher 2 года назад
@@tamir5940 I think it will work great, just read the times for when you need to apply the top coat on the primer. I will make an update video on how the epoxy is doing a few months in soon!
@tamir5940
@tamir5940 2 года назад
@@DillanFisher Thanks again for all the help!!!
@steezypeace96
@steezypeace96 2 года назад
@@tamir5940 how did your floor turn out using the rust oleum concrete primer?
@aanthonyha
@aanthonyha 2 года назад
I am still trying to figure out if i’m going to need to sand my garage. It’s brand new construction and has not seen a spot of oil in its day.
@DillanFisher
@DillanFisher 2 года назад
I would personally just use the etch in the kit and then prime and apply the epoxy for the best results. I think sanding might be overkill, but no harm in it either. My epoxy was just etched and I've dropped hammers and tools on it a lot and no chipping at all. Its really tough stuff..
@aanthonyha
@aanthonyha 2 года назад
Thanks for the input, Yeah I really don’t want to sand hahahaha
Далее
OG Buda - Сделай Мне Приятно Щас
02:24
Cat Corn?! 🙀 #cat #cute #catlover
00:54
Просмотров 6 млн
Rocksolid Garage Coating DIY (polycuramine)
26:24
Просмотров 4,2 тыс.
MY DREAM GARAGE FLOOR COATING ROCKSOLID RUSTOLEUM
22:43
DIY Painting Tricks to Get Pro Level Results!
27:03
Просмотров 3,6 млн