Тёмный

Seized Engine - Can This Generator Be Saved? 

James Condon
Подписаться 184 тыс.
Просмотров 120 тыс.
50% 1

A subscriber purchased this Briggs and Stratton Storm Responder Generator. He was told it was in new condition with low hours. The seller dropped it off and the subscriber paid for a working machine. Later, he pulled the engine over and it turn just a little bit and stopped. Now the engine is stuck and will not advance. What happened? Can it be saved? Will it run again? Lets find out.
Engine Number: 21T212-0116-G1 Code: 100419YD
Donor Engine Number: 21T202-0121-G1 Code: 111216YD
Generator Model: 030430A-00
Engine Head 799859: amzn.to/3TBp1Re
Head Gasket 697690: amzn.to/3eI1D5M
Push Rod 592673: amzn.to/3CM9yXN
I use Harbor Fright Super Heavy Duty Degreaser in my ultrasonic cleaner.
Visit My Amazon Store:
www.amazon.com/shop/jamescondon
Compression Tester: amzn.to/3yWeoki
Dead Blow Hammer: amzn.to/3EPwqsa
DEPSTECH Borescope: amzn.to/3Te0baw
Feeler Gauge: amzn.to/3SenkIv
Kill A Watt: amzn.to/3eEZmZj
Ryobi 1/4" Impact: amzn.to/3eI0paH
Ryobi 1/2" Impact: amzn.to/3eJHv3j
Tank Bushing: amzn.to/3CLzx1B
Ultrasonic Cleaner: amzn.to/3s5FJwy
If you want to donate to the channel, you can use the RU-vid "Super Thanks" feature.
#GeneratorRepair #SmallEngineRepair #SmallEngine #DIY #Fixed #Troubleshooting #HowTo #willitrun
AVR, Bent Push Rod, Briggs and Stratton, Carburetor Cleaning, Carburetor, Compression Test, Connecting Rod, Conrod, Corrosion, Engine Head, Fixed, Generator, Hertz, How To, How-To, Keepers, Low Oil, No Oil, Rust, Rusted Spark Plug, Seized Engine, Small Engine, Storm Responder, Stuck Engine, Stuck Valve, Troubleshooting, Valve Clearance, Valve Lash, Voltage Adjustment, Volts, Water Damage, Water, Will It Run

Хобби

Опубликовано:

 

19 окт 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 560   
@Nkokaran
@Nkokaran Год назад
Thanks to James for fixing the Storm Responder! I just returned from Guinea, West Africa where I gave the school the generator. They were surprised to receive the generator as supplies and materials are rarely provided. I sent James pictures of the generator with the school children. I will say that the generator has given hope to the children who have to help their parents on their farms. Now they can use light to study and learn in the evenings, and they can even gather to play near the school instead of being left out - light brings life. I've read many comments below about the cost of shipping a generator to Africa and about the voltage specifications. Here is clarification on these matters. First, the way we ship things is in bulk, along with others in the community. This makes the cost to ship minimal and cost effective. Also to purchase a generator of this size and capacity in the village would have been way more expensive than shipping this one. And with regards to the voltage, please understand that in Africa we don't make many things, but we adapt all equipment to our life and our needs. So thanks again to James for his kindness, to his preserving the planet from waste, and to bringing dead machinery back to life for good use!
@bulkchart3239
@bulkchart3239 Год назад
please be certain they check the oil with every single tank of fuel AT LEAST!
@johncourtneidge
@johncourtneidge Год назад
Well done! I have friends in Ghana, Uganda and Kenya and from Tanzania: Africa has been brutally damaged by global capitalism. Everywhere else too. Hence the politics that I do.
@dannyj5688
@dannyj5688 Год назад
Your donation of your time and parts speaks volumes of the kind of person you are....I would be proud to call you my friend!!! Thanks for all you do for us wannabe small engine repair men (and women)!!!
@BenMitro
@BenMitro Год назад
After following your channel for so long, I realise it doesn't matter whether a generator comes in running or not...after you get to it, it will be running and running well. Thanks for showing us wannabe's how its done. Your behaviour with these machines make me think of Robert Persig's "Zen and the art of motorcycle maintenance".
@gergemall
@gergemall Год назад
I have that book and agree. ❤
@johncourtneidge
@johncourtneidge Год назад
Indeed it does!
@Skynet-1
@Skynet-1 Год назад
Great job! The buyer was taken advantage of. I bet there's more to the story then what they told him. Glad you were able to pull it off for him! 👍👍👍
@jimthesoundman8641
@jimthesoundman8641 Год назад
I can't understand who would buy an motor like that without testing it. Even if it has a bad carb or something, you still could test it with starting fluid and at least listen to it run for two or three seconds. P.T.Barnum said it best, "There is a sucker born every minute"...
@bobadam7021
@bobadam7021 Год назад
@@jimthesoundman8641 I thought he bought it knowing it needed work. At the very least I would have expected someone to pull the engine over.
@PageMarker1
@PageMarker1 Год назад
@@bobadam7021 Tend to agree, buyer bought it for a low price knowing it needed work as it was sold 'as is' and rolled the dice as it looked nearly new.
@daviddawson574
@daviddawson574 Год назад
Story seems fishy to me (a black guy). West Africa is a region, not a country. Many of the countries that make it up are modernizing. One small generator wouldn't power a school anywhere else. Check what Sierra Leone (THE poorest country in West Africa) looks like. I think that guy was a scammer with a sob story.
@johncourtneidge
@johncourtneidge Год назад
Yes!
@RaysLaughsAndLyrics
@RaysLaughsAndLyrics Год назад
Very good methodical diagnosis. Patience and determination in the repair was fruitful. The icing on the top was your generosity concerning your time and materials donated to the African school. Kudos for that act of human kindness. Wishing you and yours all the best in health , prosperity and long life. Thanks for sharing.👍..and for those that keep track... I own first view.😀
@MitchEllis-dn9lf
@MitchEllis-dn9lf Месяц назад
Thank you for donating your time, labor and parts for free James
@wildefox1478
@wildefox1478 Год назад
That was very kind of you donating your time and expertise to bring this generator back to life, I hope it serves the school well, nice work James!
@MrPatdeeee
@MrPatdeeee Год назад
THE...BEST teacher on Engines I have had (in your incredible video); since I was taught "Auto Shop" in Fenger H.S in Chicago in yrs '49 and '50; by THE greatest I have have ever listened to. His name was "Mr Loizo". I was 17 and 18 then. And I turned 90 last April 5. You brought me tears of Nostalgia...yes you did. And old men rarely tear up. But YOU did it Sir. So thank you kind Sir. You NAILED it! I enjoyed the entire video. And usually; I never watch all the video. But YOU made it so interesting; I just HAD to see what was next. And YOU are a "Cut above". May Jesus bless you and yours always.
@jcondon1
@jcondon1 Год назад
Thanks Pat!
@mazafreno
@mazafreno Месяц назад
Completely agree. I was in a cruise in the last week, I payed about 100€ of internet only for see the videos of James. I think best channel for generator and also for small engine in the world. Thanks for your unbelievable videos James.
@MrPatdeeee
@MrPatdeeee Месяц назад
@@mazafreno ❤
@barrygrant2907
@barrygrant2907 Год назад
I bought a similar generator in 2004 when Frances and Jeanne tried to move my Florida home to Kansas. I've only actually used it 2-3 times since, but I pull it out before every hurricane season and give it a short test run. I use only non-ethanol fuel and add a bit of stabilizer and Marvel Mystery oil to it. After running it, I shut the fuel off and let the carb run dry. After 22 years of primarily storage in the garage, it still starts on the 1-2 pull and runs fine. The biggest maintenance problem is the tires that are always flat. Going to put solid wheels on it one of these days. A little care and maintenance go a long way.
@AntonioClaudioMichael
@AntonioClaudioMichael Год назад
Omg at the Rust in the filter and Box
@Exploder206
@Exploder206 Год назад
Just want to say James I discovered your channel about 6 months ago and you inspired me then to go around buying broken generators in my area, fixing them and then selling them to make a little side money. It's been going amazing! It's crazy what people think is "trash" when all it needs is a good cleaning and some fresh gas most of the time! I think I speak for alot of young guys here(I'm only 23) you inspire and provide lots of knowledge. Thank you and keep up the amazing content!
@1pcfred
@1pcfred Год назад
The vast majority of small engine problems is fuel related. Bad or contaminated fuel gums up the carb then that's that.
@jcondon1
@jcondon1 Год назад
Would agree with Paul below, that most problems are related to neglect. Fuel being the first thing to go.
@1pcfred
@1pcfred Год назад
@@jcondon1 the bouquet of skunked fuel is the smell of profit.
@lloydprunier4415
@lloydprunier4415 Год назад
Has helped some old guys also!!
@garyhilder7733
@garyhilder7733 Год назад
Excellent. Particularly given the generator’s final home where it will likely be greatly appreciated and valued.
@bigal1863
@bigal1863 Год назад
I own one of these for 17+ years now. Still starts on the first pull! Maintain it and it's a very reliable piece of machinery!
@martyb3783
@martyb3783 Год назад
Great job James. I am glad this turned out well for this great cause. Thanks for that and for making this video.
@davyarthurs
@davyarthurs Год назад
Well done James for your good work for a good cause. They certainly have a rather well running unit now! What a recovery!
@dougthomasmusic
@dougthomasmusic Год назад
This guy knows his stuff. Thanks James for the clarity and guidance. Very much appreciated!
@berniken6511
@berniken6511 Год назад
Well done James and for a very good cause. Always look forward to your great videos.
@Chris.Y.054
@Chris.Y.054 Год назад
Jim, another great video. It was very nice of you to donate your time and resources to help this person out.
@geoffreyhall7843
@geoffreyhall7843 Год назад
Thanx for giving your time and matl for a good cause. You rock, James! Good content, as always.
@chrisginostravels7388
@chrisginostravels7388 Год назад
Good job. I am sure the school will appreciate and benefit from your great work and support. It's nice to know that there are some people like you still about.😀
@4Truth4All
@4Truth4All Год назад
Good Man! Thanks for fixing the generator and donating your time. As a person who also supports charities abroad I appreciate your efforts!
@dmorrone111
@dmorrone111 Год назад
Well done James! Trying to figure out the water situation. Time well spent for a good cause.
@geraldharkness8830
@geraldharkness8830 Год назад
thank you for your generosity! im so glad you could help the person who bought this for a very good cause!
@ablelock
@ablelock Год назад
Great job on the generator and I think that’s really nice that you’re willing to donate your time to assist the school across the pond I think that’s great. I’ve always wanted to do those kind of things as well if it ever come up in my business. look forward to some more good videos.
@texascottonfarmer
@texascottonfarmer Год назад
👍👍👌👌 Nice work! Very satisfying to see the engine restored to operating condition.
@dalemartin9948
@dalemartin9948 Год назад
That was a very kind thing for you to do. Many blessings will be returned for your gift of love. I watch every video you make.
@scottkakos4236
@scottkakos4236 Год назад
That’s cool that you donated your time to the guy. I have learned a lot from you videos. Thanks
@ddblairco
@ddblairco Год назад
great job James, I was struggling and gritting my teeth right with you as you pushed in the fuel valve on bottom of tank. thank you.
@brianwood5220
@brianwood5220 Год назад
Great job James, that buyer was so lucky you were able to help him. I'm sure those people in Africa will be delighted with the're new power source. Thanks for sharing.
@allotmentfornovices8256
@allotmentfornovices8256 Год назад
I always look forward to your fantastic tuitions my friend once again thank you for your time and knowledge
@douglaseveland207
@douglaseveland207 Год назад
Really great the way things worked out. Thanks to you for your generosity!
@Plons0Nard
@Plons0Nard Год назад
When you started on this generator, it looked pretty dark. But you turned it, once again, into a good working AND good looking machine. Great job, James !
@daviddalley5652
@daviddalley5652 Год назад
You are awesome for helping out and making the dreams of many youngsters in Africa come true.
@MichaelDavis-cg8uj
@MichaelDavis-cg8uj Год назад
Your a good dude James. You took someone who got a bad deal and now Im sure when the generator is put to use in its new home will shine the lights for many to learn. Good job sir
@rghong
@rghong Год назад
Great Job As always James! Very nice of you to do this.
@1SmittysGarage
@1SmittysGarage Год назад
Another job well done! Always a through and clear explanation of the process at that! Quality work bar none. Blessings and respect to the grind and hustle!
@drticzon
@drticzon Год назад
Bless you for the service you gave to that school. I hope you get it back 10 folds.
@JRattheranch
@JRattheranch Год назад
Always enjoy your meticulous attention to details and your donation of time and parts, will be repaid many times over in your lifetime James, I'm assured by my own life experiences! 👌💪
@andyfairman7812
@andyfairman7812 Год назад
Great job and very generous of you to donate the man-hours for a good cause! Enjoyed!
@YukonHawk1
@YukonHawk1 Год назад
You just helped a lot of school children and teachers by making their classrooms functional to conducive learning. I'm glad you were able to help your friend too and avoiding a complete disaster. Do you have any follow up news on its arrival to South Africa? It would be great to see a picture of it at the school 😉 Anyway, excellent video and good on you for donating your time. Way to go.
@marynunn1708
@marynunn1708 Год назад
Always like your videos. Great teacher as always. But what impresses me most about this particular job is the generator itself. Starts on the first pull, minimal loss of hertz with increasing load and produced more than its rating with zero issues inside the powerhead. Hoping it’ll continue to be be a long term blessing to its future owner.
@tomg721
@tomg721 Год назад
Thanks for donating your time and talents. Hopefully the owner can get some back from the seller.
@CuriousKL
@CuriousKL Год назад
“caveat emptor”
@1pcfred
@1pcfred Год назад
All sales are final.
@jeffreyhaynes5774
@jeffreyhaynes5774 Год назад
Not just some,but all the money.
@1pcfred
@1pcfred Год назад
@@jeffreyhaynes5774 no refunds!
@kenk3102
@kenk3102 Год назад
...James, it's a pleasure to watch another one of your outstanding videos.....top notch quality both video and audio....keep 'em coming!... 🙂
@DS-lg2jb
@DS-lg2jb Год назад
Jim, you have a kind soul. Thank you
@farhanpierlite4719
@farhanpierlite4719 Год назад
Another feather in your cap james. Not just you are very hard working. You also have a very good heart. Wish you good health and success. Take care 🥰
@ProSaw70
@ProSaw70 Год назад
Always very logical and methodical in your approach. Thoroughly enjoy all your videos James.
@empiesidbury1573
@empiesidbury1573 Год назад
James, I have a small engine repair business myself, and I am now trying to make it my full time gig. Back when covid started it cost me my job and since I have had a part time gig and been doing small engine repair. I have always enjoyed your videos and have actually learned some things from you. I wish I had the knowledge of the power head that you have. I just wanted to tell a little about myself. My main reason for reaching out to you was to suggest that you might benefit from a vessel blue handle JIS screw drive with the end with the splines on the tip. It works great for JIS and regular #2 screws as well it has become my go to driver actually for all screws in the #2 size and JIS. It is priced reasonably and can be found easily on Amazon. Once again thanks for all of the really great videos you are making.
@tonygriffiths2485
@tonygriffiths2485 Год назад
That had a lot of surprises. Especially the reason at the end. Fantastic, well done and thankyou :)
@JohnDeUlloa
@JohnDeUlloa Год назад
Hi James I recently found your channel and while I'm new to engines, electrical and generators, I learned a lot. You do a great job and love the way you take the time to explain even the smallest of details. I'm sure this is a labor of love and I'm sure all the students will appreciate your efforts. What did Captain Picard say? Oh yeah...Well Done.
@stephenbullock1443
@stephenbullock1443 Год назад
Excellent work.thats nice of you donating your labor.
@carolchandler1753
@carolchandler1753 Год назад
Amazing! I so love watching you perform your magic! Thanks for producing these videos.
@FirstWizardZorander
@FirstWizardZorander 10 месяцев назад
Amazing that the carb was in such a good shape. I could hear the apprehension in your voice as you popped that filter cover. I think if the cylinder bore was cast iron, that would've been it. Great job as always, James, and your generosity goes a long way, in this case literally!
@Theoppositeofchaos
@Theoppositeofchaos Год назад
Now it can respond to the storm..like the name suggests...thanks for sharing James..I think the community appreciate your work 👍
@wesleypulkka7447
@wesleypulkka7447 Год назад
James, the answer to my question was at the end. So thank you! All the best!
@toxin911
@toxin911 Год назад
youre a good man Charlie Brown...here in Florida just before hurricane Ian my childhood friend from Bklyn NY purchased an inexpensive generator. same power level as the one we just watched in your video. the crook sold several in his retirement community and all with major problems. the one my friend purchased started fine but when he hooked up his wifes oxygen device the generator began shooting sparks and damaged the oxy device which meant a race to the hospital for her. broke my heart i couldnt help him at the time being 4 hrs north of them in Florida just pisses me off how these people can take advantage of the older folks and usually get away with it. sorry for my longwindedness. great videos my friend, i always look forward to Thursday
@bjh5766
@bjh5766 Год назад
Thanks to you and the donor the school has power. Kudos to both of you. Humanitarians. The world needs more of you both. As for the water that got into machine I feel it was probably power washed not very carefully to make it more appealing to sell. Unfortunately people like that still lurk around.
@spc.callahan1462
@spc.callahan1462 Год назад
I like that tea basket in your ultrasonic cleaner to hold small parts. I'm definitely going to use that idea. Thanks for sharing.
@lloydprunier4415
@lloydprunier4415 Год назад
This is the exact generator I have, and it has never let me down through 2 hurricanes and 1 polar vortex! I have changed the oil more than required and only had carb problems once from the ethanol gas. I will be giving it a test run tomorrow and have only used ethanol free fuel since my carb cleaning. These people are lucky to have found you!
@AntonioClaudioMichael
@AntonioClaudioMichael Год назад
Voltage and hertz are super steady at 3000 watts and at 5000 Watts as well as 5500 watts what a good machine
@rustywreck3351
@rustywreck3351 Год назад
Loves watching your videos, i like buying mechanical things that don’t work and trying to repair them , just to see why they failed is what i like, keep the videos coming 😊
@lot27a
@lot27a Год назад
You're a good man James. I've got this same generator (albeit the 6500w version) bought in 2003 during Hurricane Isabell. It's only got 70 hrs but this video gives me great hope that it will last for many years. I've never seen another one like mine actually. It has three wheels, electric start and a deluxe panel (hour meter, flood light). It even came with a transfer switch. Paid way too much though. You are a valuable resource. Thanks for the excellent content!
@joecoleman3069
@joecoleman3069 Год назад
This was my first time on your channel, James. You just earned yourself one more subscriber.
@chuckmayerchak3071
@chuckmayerchak3071 Год назад
Great save on that generator!!! It held the max load much better than most I have seen you test. I'd still like to know where all that water came from. Wasn't the carb. It had no corrosion. Doubt it came from the exhaust it ran clean right after startup. It's definatly not down on power either! Donating your time and resources I'm sure will be deeply appreciated. This will be one of my favorite videos of yours!
@67mlb67
@67mlb67 Год назад
The seller should be ashamed of themselves. Taking advantage of someone trying to do a good thing for others. You are a good man to help out someone in need. I commend you on your good work and your kindness.
@paultice610
@paultice610 Год назад
Good morning James I can’t get of these video great job keep them coming
@brianevans4525
@brianevans4525 Год назад
Thanks for good people like you and God bless you and your family.
@bobcarry4820
@bobcarry4820 Год назад
The cleanliness of the machine looks like it has very low hours. I am sure it was heading to the scrap heap without your help. Great job.
@stazeII
@stazeII Год назад
Just sickening hearing what buyer was told compared to the condition the generator was in. :( Great job with repair!
@1pcfred
@1pcfred Год назад
It's nothing a few twists of a screwdriver can't fix, Greg.
@giggiddy
@giggiddy Год назад
Would love to hear some updates on how its doing and how many hours they put on it. I'm obsessed with longevity on these types of machines and hope they get hundreds of hours of great service for that school. You may never know what that means to those kids over there. We take those things for granted here in the States. Cheers buddy. Well done
@AntonioClaudioMichael
@AntonioClaudioMichael Год назад
I'm impressed that engine didn't blow up with how dark black that oil is and how little it had
@FishFind3000
@FishFind3000 Год назад
I have two machines that I got for free and both had crazy low oil and they still run great after an oil change. One of them also had no air filter and it was a lawn mower. The other machine was a tiller with a broken and loose oil fill/dipstick cap. It had leaked most of its oil out. Both of those engines show me there not as delicate as I once thought they were. They were also both Hondas.
@1pcfred
@1pcfred Год назад
Luckily the top end froze solid before the bottom end could let go.
@AntonioClaudioMichael
@AntonioClaudioMichael Год назад
@@1pcfred right
@paulleblanc4653
@paulleblanc4653 Год назад
Pulled a seized Honda 2500 gen from the dumpster at work. It had low oil switch disconnect, no oil in sump. Added oil , oil also in the cylinder. Piston was freed using a power bar By removing pull start assembly. This generator ran great, but consumed a lot of oil. Your video was great education for me, 78 years and retired electrician.
@tubeDude48
@tubeDude48 Год назад
Thanks for your contribution ! 👍
@pinecone01
@pinecone01 Год назад
Nicely done! This video goes to show why it pays keep old parts on hand, you just don't know when you'll need them!
@1pcfred
@1pcfred Год назад
Well yeah. When the new parts cost $300. Duh!
@Joe_HamRadioGuy
@Joe_HamRadioGuy Год назад
Nice save he got lucky with it and having you fix it. I hope it gets too the school unharmed.
@deangentles4966
@deangentles4966 Год назад
Hi James great job first pull too mate Your donation of your time and skill says it all James thanks for sharing
@kingwood4357
@kingwood4357 Год назад
Good job and thanks for donating your expertises and time 👍
@danburch9989
@danburch9989 Год назад
That was an amazing repair and recovery. What upsets me the most is the seller took advantage of the buyer. Let that be a lesson to all. If the seller says it runs or works or whatever, make them prove it.
@1pcfred
@1pcfred Год назад
I'm not buying any used power equipment without giving it some look. I know it's going to be messed up but I don't want severe internal mechanical damage. And yeah people are scumbags.
@mmcc310
@mmcc310 Год назад
Excellent trouble shooting and diagnosis, thanks!
@shawnmrfixitlee6478
@shawnmrfixitlee6478 Год назад
nice work James.. i am sure the kids at the school will get good use of it.. god bless you
@giggiddy
@giggiddy Год назад
Love your old school type oil can used to lube the valves. Sometimes the old designs work perfectly! I know I'm not the only one that smiled at seeing that. Cheers!
@rstephe
@rstephe Год назад
Just wanted to throw in a little something to offset your time and parts and for a great cause. Thanks for bringing us along . Keep the great vids coming. I enjoy your attentions to detail.
@jcondon1
@jcondon1 Год назад
Thanks!
@calrob300
@calrob300 Год назад
I always appreciate how you end your videos with the tag line, "I hope this video helped someone", but especially so in this case.
@jeffclark2725
@jeffclark2725 Год назад
That was a great video, im still suprised all the water damage to the engine , but no water damage to the generator portion, i used to have several of those generators brand new, took forever to sell them new
@watermanone7567
@watermanone7567 Год назад
Excellent job Jim, also for a good cause. I have had a few of those engines that also use oil. Hard to get customers to check the oil before each use. I had a neighbors craftsman YT3000 riding mower that has a Briggs engine that uses about 6 oz. of oil after each use. He has a hard time believing that they use oil. I changed it to a 10/40 oil to try and slow the use a little. You can only see oil from the exhause when shutting down the engine. Plug does not foul etc. Thanks for great video's.
@1pcfred
@1pcfred Год назад
My Briggs doesn't use oil it just leaks it out. Least I think that's where most of it goes. On the plus side I never have to change the oil on it. I just keep adding to it. I never start it without checking and adding some.
@alext8828
@alext8828 Год назад
No matter who or what you help, you make the world a better place.
@AntonioClaudioMichael
@AntonioClaudioMichael Год назад
Nice to see it fired right up and makes power niceee
@user-mx5mc3ip1o
@user-mx5mc3ip1o 11 месяцев назад
Try opening the filler cap while you drain the oil. Also do you own an impact screwdriver with assortment of tips? Yes I know you love your ryobi impacts - try a manual impact screw driver. They can come in handy. You do quality work and I love watching your restoration and diagnosis efforts. I hardly ever cringe but there are times I try telling you what to do. Thanks James.
@williammcilrath9828
@williammcilrath9828 Год назад
thanks again for a informative vid James Bill
@matthijsverweijmeren6114
@matthijsverweijmeren6114 Год назад
The heavy carbon buildup on the piston probably is the result of the high oil consumption. Again good work. Lovely to see the precision and care taken on how issues are diagnosed and dealt with and how stuff is taken apart, thumbs up for James.
@butler386
@butler386 Год назад
Thank you for your generosity. I am sure the kids and teachers will really enjoy the generator. As usual a fantastic repair on a badly kept generator. Seems like the seller was a crook. But I guess if you don't know then you don't know. Thanks for the videos.
@rodneymiddleton9624
@rodneymiddleton9624 Год назад
Awesome job!! Thanks for all you do!!!
@Bulletman426
@Bulletman426 Год назад
Really nice job! It’s a shame the buyer was taken advantage of. I enjoy watching your work. Excellent
@offthestreetsandinthecreek7294
Good Morning Love your channel I learn so much
@larrykelly2838
@larrykelly2838 Год назад
You're a good man Charlie Brown. Great video.
@jayjudd6518
@jayjudd6518 Год назад
Your good deed. Congratulations on another great video . I probably learned something. Thanks
@StagArmslower
@StagArmslower Год назад
I had the sparkplug seized on new open frame generator. I'm still talking to the company. I was able to remove the plug by slowly rocking it back and forth small amount for about half an hour. There was a lot of aluminum from the head in the treads, but I was able to install new plug with Anti seize lube and run the generator. I sent them the picture of the plug and don't know what they going to do about it. I asked for new engine head and gasket; I'm afraid that new generator would have same problem because I suspect that thread was never cut in the head and sparkplug was just forced in to create the tread. At the end I had to use long arm wrench and probably about 90 to 100 ft lb of torque to remove it. Love to watch your videos, I don't know if I could stay so calm encountering all these problems
@user-xp8gr6yl1y
@user-xp8gr6yl1y 4 месяца назад
You are an expert on this model of storm responder.
@AZVIDS
@AZVIDS Год назад
Good on you James. Nice fix and explanations👍👍👍
@rafaelrodriguez3756
@rafaelrodriguez3756 Год назад
I enjoy and learn a lot watching all your videos!! Thanks!
@jcondon1
@jcondon1 Год назад
Thanks Rafael!
@KensSmallEngineRepair
@KensSmallEngineRepair Год назад
New Slogan: James Condon, not just in the USA anymore! Great job, great cause!
@jcondon1
@jcondon1 Год назад
Thanks Ken
Далее
Neglected PowerStroke Generator - Will Not Start
50:16
Просмотров 114 тыс.
How To Dig The Perfect Post Hole
16:26
Просмотров 313 тыс.
Я читаю переписки сына
00:18
Просмотров 670 тыс.
ПОДВОДНЫЙ ГЕЙМИНГ #shorts
00:22
Просмотров 847 тыс.
New Storm Responder Generator Stopped Making Power
56:25
Trashed NGK Generator - Will it Run and Make Power
51:38
Stuck Kubota Engine - Will It Run?
1:14:55
Просмотров 434 тыс.
World Record Tunnel Glide 🪂
0:19
Просмотров 30 млн