Steering damper installation on a *VSETT 10+* 

Thanks yeah I know lighting sucks. I would definitely recommend it I have over 1000 problem free miles on it.

Just got mine today. It's so much more fun to ride than the Varla Eagle One

its a BEAST of a scooter. Im still getting used to it. I have a hiboy sr2 pro to compare it to. people on the street, once they see it, either they say: "damn" or "kewl scooter dude". its a little on the heavy side.

It is most likely the big main stem bolt that goes in from underneath the stem, its either too tight or too loose. In my opinion if you get the torque right you dont need a steering damper on the Vsett 10+. Theres a video on You Tube on greasing the stem to avoid creaking that teaches you how to loosen the main stem bolt, Sorry no link. Hope this helps your wobble issue, Ride safe!

You can steer almost all the way left and right. No cables get pinched when you set up the damper correctly, there is a bump stop built in. It does restrict the turns a little more than without it which only really affects you when trying to make a u turn in a really tight spot you have to keep going back and forth. On a regular turn you actually turn mostly by leaning so no restrictions there. Ride safe

It's to avoid speed wobbles when riding fast ( which the vsett10 really doesn't have a problem with) Also to avoid wobbles when hitting a pothole at a high rate of speed. Ride safe

I got it from revrides.com I believe it was around 2200 it is the 25.6ah.

No I have around 400 miles on mine no problems with the controller. I have heard of some going bad online. Looks pretty easy to change, just open the deck unplug everything off old controller and plug new one in. I think the hardest part is packing everything back up in the deck. I've attached a link from the macury store which makes Vsett. It shows where everything plugs in. Original VSETT 10+ Intelligent Brushless Controller Only for VSETT 10+ Electric Scooter Integrated 2 in 1 with Hall of Sine Wave a.aliexpress.com/_mqjBvf8

@@escoot_nyc1651 thanks mine burned out after 42miles .. but rev rides has awesome customer care service... us people that don't know how to change it or just don't like electricity scary .. have to find a scooter shop and pay after paying for the scooter. . Thanks for the link.. I hope this one last longer 🙏🏾

Same

Thats sucks I've had mine for over 2 months and no issues, you really dont need a steering damper on the vsett10 if you adjust the main stem bolt from underneath just right

Ok I will not get the damper 👍

Don't tighten the clamp too much. It's a known issue.

Yeah this scoot is a shitshow, everything was designed incorrectly like this one, another thing was the split hub, who thought is was a good idea to install the removable rim on the motor cable side?!

What link?

@@escoot_nyc1651 Do you have a link to the damper? For people that want to buy it.

@@jjayguy23 Yes, I added the link in the description. Thanks ride safe

@@escoot_nyc1651 Thanks man!

Its a very simple process. Take out bolts put in bolts. I've been working on my own cars for years, brakes, starters, timing belts. This in comparison to that is childs play. Ride safe.

You are some what right atleast for the vsett10 you really dont need a damper. I did torque the main stem bolt from underneath ( when I took the stem apart to grease it) I noticed too loose you get wobble, too tight same thing. I got it just right and marked the spot with a paint marker. I did take a fall afterwards going pretty fast making a turn hit a pothole.(My own fault). After that incident but truthful mostly for the looks I decided to get a steering damper. I always keep it on 3 stiffness, it goes all the way up to 16. At 3 you really dont feel the difference that much.

You mean under the stem? Such a big Allen key is not included in the box with the scooter, right? You do mean that one?

@@escoot_nyc1651 where are you guys finding that screw? Is it the very big one under the stem? I can't seem to find an Allen key for this one.

@@rbmanb Yes it is the big one underneath the stem, I believe it is a 10mm allen key. First you have to loosen 2 little screws on each side of the stem that prevents the main bolt from moving. Don't use there allen keys they are garbage.

@@escoot_nyc1651 thank for that! So the tiny screws first, and then the huge one. Got it. Loosen it up about how much?

1 thumb down. I wonder who could it be 🤔. Change the channel budy. You commented the same on my other video but you keep coming back

@@escoot_nyc1651 Sorry Mate, I just gave my honest opinion. I'll try not to give any constructive criticism next time