Тёмный
No video :(

VW JETTA MAKES 415WHP ON A STOCK 1.8T ENGINE! 

hp_enthusiast
Подписаться 3,3 тыс.
Просмотров 187 тыс.
50% 1

Whats up guys! Heres some clips of my big turbo jetta project from this summer! It did actually make 415whp at 27 psi, and I been going on this setup all summer 5-7000 miles.
The set up:
2002 Volkswagen jetta 1.8t awp
Completely stock longblock
Stock rods!
Borg Warner s257 sxe 7670
Chuckfab elm manifold
Chuckfab intercooler
Chuckfab intake
Chuckfab catch can
Chuckfab exhaust
Chucktune e85 tune
1000cc Bosch ev14 injectors
Walburo 255 inline with stock in tank
2.0t coil packs
Act lightweight flywheel
Act 6 puck clutch
Peloquin lsd
Chuckfab trans brace
Bfi stage 2 engine/trans mounts
Song: Fredji - Happy Life (Vlog No Copyright Music) Music provided by Vlog No Copyright Music. Video Link: • Fredji - Happy Life (V...

Опубликовано:

 

24 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 358   
@VwBora06
@VwBora06 6 лет назад
Never put music on videos again, please haha
@aRYANz88
@aRYANz88 5 лет назад
agreed.
@estefaniaarellano7062
@estefaniaarellano7062 3 года назад
@@aRYANz88 iIisiisiis@9sa9a98osoodossñsñod99ssññP 89s9s9s9sñÑoso AS 9º$W9SPOASSÀ1 A QAEDA+🕐 ++QUÉ 1++ESPOROZOARIO+PO9Q9W9Q+++1+ SOSOOSOSOS89SIISISLOSLLLQLQ 00 09OPOO010OOQOOÑO PPPPP
@djtonee83
@djtonee83 5 лет назад
To everyone that is asking how this is possible on stock rods here is your answer.... big turbo takes longer to spool so he doesnt have a tq spike. smaller turbos spool real quick so you get all the tq almost immediately and that is what kills the stock rods. If you pay attention to the dyno graph you can see the hp and tq dont spike the gradually build so the rods are fine. everythign else i the engine is good to about 450whp.
@tadman3d
@tadman3d 5 лет назад
also torque maxes much earlier than hp. so if you tune it you could get a huge hp spike at the end and your max tq would still be pretty low at lower rpms.
@aidanhamilton9859
@aidanhamilton9859 5 лет назад
Appropriately sized turbos dont break shit. That big ass turbo can easily break shit, when big turbos spool they hit hard. A turbo that spools good and has a good manifold setup will work just fine.
@teronuppi5388
@teronuppi5388 5 лет назад
I own 1.8t aeb with tiny hybrid turbo (k04 compressor and rs6 turbine) running at 1.5 bar which produces roughly 300hp. It spools literally instantly and torque spikes at its highest just before 3k. Rods are still intact after 30 000 kilometers. Oh yeah and running on ethanol ofc.
@aidanhamilton9859
@aidanhamilton9859 5 лет назад
@@teronuppi5388 some motors like abuse. My turbo 4.0 jeep cherokee made 300whp on a hot day at 13 psi, 91 pump gas, and some water meth that i didnt tune for lol.
@trashman1694
@trashman1694 5 лет назад
@@aidanhamilton9859 Haha I always wanted to turbo a 4.0 cherokee
@BOOSTEDDUDE
@BOOSTEDDUDE 5 лет назад
Man, that's amazing! I never thought the stock bottom-end on a 1.8t could handle over 300 whp! Nice work and setup for sure! Sub'd
@VdubInParadise
@VdubInParadise 5 лет назад
Great setup man! Hopefully next summer I can start my big turbo build. I Probably won’t go with a massive turbo, I like to keep the power low-mid range.
@mxz700MN
@mxz700MN 5 лет назад
Thanks! And thats awesome!
@OriginalLofiBeats
@OriginalLofiBeats 4 года назад
its VDubbb! xD
@redrhino1911
@redrhino1911 3 года назад
The bigger the turbo, the safer the motor is, a big turbo doesn’t torque spike, making it possible to run this power on stock rods. Small turbos spool fast and create a torque spike when boost comes in hard, bending rods.
@karlsanderson8127
@karlsanderson8127 2 года назад
It's the torque that bends the rods if you have laggy turbo for more top end your fine running this power on stock block plus a good tune helps
@typedrew
@typedrew 5 лет назад
Stock rods are fine because that thing makes peak torque at like 6500, nice runs
@oulophyllia8806
@oulophyllia8806 5 лет назад
But does it have a/c
@mxz700MN
@mxz700MN 5 лет назад
Ice cold!
@SuperRameil
@SuperRameil 4 года назад
@@mxz700MN lucky you lol. I just picked up a 02 MkIV jetta wagon with forged internals and big turbo. Sadly no AC here, now summer is coming so I might be screwed. On the plus side, all my windows work.
@jrockenterprise9493
@jrockenterprise9493 4 года назад
SuperRameil does it have a German flag front mount?
@domo-tech467
@domo-tech467 4 года назад
Lol
@YeetusChristus
@YeetusChristus 3 года назад
@@jrockenterprise9493 In my Germany spec bora there are two giant flag holders on the b pillar
@TurboDub1991
@TurboDub1991 6 лет назад
I love to see a well tuned car! *Subscribed*
@audiwankenobi361
@audiwankenobi361 5 лет назад
Ladies and gentlemen, here is your replacement for displacement!....my first jump into the turbo4 life was with a 1.8T aeb.
@gnarshread
@gnarshread 4 года назад
Very nice! I love the intercooler setup!
@creativebuildlife
@creativebuildlife 5 лет назад
Great job now I kno I not the only one running 30pis on my 1.8t b5
@kevondouglas4088
@kevondouglas4088 5 лет назад
What was the mods
@OfficialSNIxn
@OfficialSNIxn 4 года назад
Building a awm 1.8 build. AEB Head on a 06a block. bored bigger, wiseco pistons, forged rods, super tech valves, super tech valve springs and retainers, ARP mains, head bolts, cam bolt, crank bolt, flywheel bolts. Ie manual, timing belt tensioner kit, r8 coil packs, Gt3071r, Bosch 044 fuel pump, 620cc injectors, meth injector, tuned on 93. These rods are well known to only be able to handle 350whp. I'm shocked they haven't bent. You're treading thin water man 😂 there's a nice write up of all the hp these parts can take, I'd highly recommend taking a look some time! The main weak points are rods, exhaust valves, and timing. (crank dampener bolt, cam gear bolt) these exhaust valves are hollow and like to explode with high hp and rpm.
@12redwhite
@12redwhite 6 лет назад
Dope af dude keep it up!
@mxz700MN
@mxz700MN 6 лет назад
Enzo herrera thanks man!-
@Noel127
@Noel127 5 лет назад
Vw is the shit. I wish I could turbo my mk5 Wolfsburg 2.5
@renaldowilliams3671
@renaldowilliams3671 5 лет назад
You can turbo 5 cyl engine
@i_read_bad_reviews
@i_read_bad_reviews 5 лет назад
This thing would be so cool awd
@danielbargas3377
@danielbargas3377 6 лет назад
How is this possible and what are the torque numbers, I would assume timing is pulled on the top end to keep torque under 350
@mxz700MN
@mxz700MN 6 лет назад
It made 415whp and 378torque on 27psi, but that was about 1 year ago I have it set at 36psi now and about 18 degrees of timing at peak torque
@danielbargas3377
@danielbargas3377 6 лет назад
hp_enthusiast but I doubt it picked up any torque, what size turbo are you running
@mxz700MN
@mxz700MN 6 лет назад
it's a s257sxe
@danielbargas3377
@danielbargas3377 6 лет назад
hp_enthusiast that tune has to be spot on, I take it the car is e85
@mxz700MN
@mxz700MN 6 лет назад
@@danielbargas3377 11.8 afr at 36psi just did 20 back to back passes roll racing today a brainered international raceway!
@TossDatBacon69
@TossDatBacon69 6 лет назад
Thats a beautiful powerband dude ....good job man..
@mxz700MN
@mxz700MN 6 лет назад
joey foberg thank you!
@TossDatBacon69
@TossDatBacon69 6 лет назад
hp_enthusiast np bud
@oso1318
@oso1318 5 лет назад
Thats what im trying to do get at least 400hp on the stock 1.8t
@evalegacy1
@evalegacy1 5 лет назад
If you haven't snapped a stock rod yet, you're playing with fire bro!
@mxz700MN
@mxz700MN 5 лет назад
the car loves the boost! it has a blown up trans right now
@driftmate4871
@driftmate4871 5 лет назад
One week ago my transmission threw the pin and blew a hole, oil got on clutch... I have replaced my 5 speed gearbox o2j with shorter one something like 3.7 to 4.06, from 1.8 NA. Now it's good :P
@driftmate4871
@driftmate4871 5 лет назад
But don't know if it's not too short, bouncing the 5 gear at 240 km/h :P
@Deadxwxwxw
@Deadxwxwxw 5 лет назад
And i have stock 1,6l whith 77kw and still love her :)
@meyborider555
@meyborider555 5 лет назад
Hell yeah! My 1.8t just made 363HP to the wheels with stock rods!
@DominicGholson
@DominicGholson 5 лет назад
What all did you do to it? I'm starting a build on one soon, and realistically only want 200 tops out of it.
@Mathias050499
@Mathias050499 5 лет назад
Dishton You can reach close to 200 hp just by having a 1.8t mapped
@DominicGholson
@DominicGholson 5 лет назад
@@Mathias050499 must be a completely different set up from what I'm working with. The motor I have it's a 1.8 from 1989, and is a SOHC. Which only makes ~90HP stock.
@Mathias050499
@Mathias050499 5 лет назад
Dishton the engine he is running in his Jetta is a 1.8T DOHC 20V, so yea, completely different engine
@Mathias050499
@Mathias050499 5 лет назад
Dishton Also this engine comes with 150 to 180 hp stock.
@mrbrowz1000101
@mrbrowz1000101 5 лет назад
This gives me hope. Just entertained an 18 2.0 B8. Good for looks, mileage, and bumper to bumper but cant play without alot on the road. I at least need a programer; killin me when a Dodge Journey...know what? Nevrmnd.
@angeljavier5320
@angeljavier5320 3 года назад
300HP with no check engine light on goal on mine, any idea or mods for these goal or it is not possible?
@andrewluostari5592
@andrewluostari5592 5 лет назад
Hes from minnesots absolutely a amazing car
@stevenmcc2119
@stevenmcc2119 2 года назад
The mustang had you
@inanismailov
@inanismailov 5 лет назад
This thing is sick
@rexjewels8754
@rexjewels8754 5 лет назад
Dam should have got V tech
@daniel27560
@daniel27560 5 лет назад
Yeah everybody needs to slow down every once in a while
@Curiosity_Cars
@Curiosity_Cars 4 года назад
is this still runing ?
@aliveagainstmywill9143
@aliveagainstmywill9143 3 года назад
Thats what I wanna know
@Workaholic248
@Workaholic248 3 года назад
Sweet! Where can I find Chuckfab’s products?
@bobow4075
@bobow4075 Год назад
What happens when you try and drive it on roads
@Wethekingstrades
@Wethekingstrades 4 года назад
How long did the stock engine last? What ended up being the cause? I just picked up a 2004.5 gli with a gtx 3071r on wastegate pressure which should be 12 psi and it’s been running that for a while now and I’m afraid of it letting go. Any tips would be helpful thank you
@ttviperv10
@ttviperv10 6 лет назад
What size turbo are you running. And what are your torque numbers. And is the motor completely stock unopened are you at least running arp head studs. What computer are you running. Keep up the good work and keep the videos coming.
@mxz700MN
@mxz700MN 6 лет назад
the turbo is a Borg Warner s257sxe 7670. and the engine is completely stock with 117k miles on it only thing that has been off if the valve cover. I've only had it on the dyno once it made 415whp and 378 torque. As far as tuning, it's a stock computer that a local guy street tuned for me!
@mxz700MN
@mxz700MN 6 лет назад
ttviperv10 And thank you for the support!!
@ttviperv10
@ttviperv10 6 лет назад
Wow that's awesome good job
@ttviperv10
@ttviperv10 6 лет назад
I was watching one of your other videos and it showed your engine bay where is your mass airflow sensor
@mxz700MN
@mxz700MN 6 лет назад
ttviperv10 it's welded in the bottom if in intake!behind the flter
@ibarretero98
@ibarretero98 5 лет назад
I have An Audi B6 1.8t 190k 5spd on it no check engine , engine is pretty stout , I’m new to this platform and I want to turbo swap but would recommend this even considering my mileage , would reliability spiral if I did ?
@sups1264
@sups1264 5 лет назад
How did you tune the car and who tuned it? I just got done with my big turbo kit on my Passat and Im now looking to get it tuned.
@CADOIP
@CADOIP 2 года назад
Long time no answer u ever figure it out ? How did ur build go thanks in advance
@juanmontoya-campos2295
@juanmontoya-campos2295 3 года назад
How long did the stock engine hold up
@felixhb12
@felixhb12 4 года назад
The music killed your video, nice car though lol
@MrOutlawLSX
@MrOutlawLSX 5 лет назад
I just picked up a 04 gli with 190k miles thats been taken care of it has a stage 2 tune on 20 psi ,intake, 3 in down pipe and 2.5 in exhaust. I was wondering are they reliable at 20 psi with stock turbo.
@mxz700MN
@mxz700MN 5 лет назад
I think it should be pretty reliable with the stock turbo!
@MrOutlawLSX
@MrOutlawLSX 5 лет назад
Awesome I mean I know a little about these but just wanted know more about them, best car I’ve owned so far.
@AssistsYT
@AssistsYT 2 года назад
Mine it’s a 2003 gls with a 2.0 engine can mine make tha on a stock engine
@xcontrol3741
@xcontrol3741 4 года назад
What year is this car ?
@mxz700MN
@mxz700MN 5 лет назад
I have a chuckfab custom tune on the stock ecu!
@RedRum_Eg6
@RedRum_Eg6 4 года назад
hp_enthusiast i need a good chuckfab tune how do i get in touch?
@DimoS...
@DimoS... 3 года назад
Very impressive !! How much miles have the engine ?
@ge7468
@ge7468 5 лет назад
This is amazing man ! How fast is 0-60 on fwd?
@mxz700MN
@mxz700MN 5 лет назад
it's not very good right now my tuner just made me a lc/2step file for the car ,but the trans is currently blown up. once I swap the new trans in it will havs launch control so that should be awesome
@ge7468
@ge7468 5 лет назад
@@mxz700MN Keep me updated please !
@mxz700MN
@mxz700MN 5 лет назад
@@ge7468 forsure!
@Jesse-hr2ef
@Jesse-hr2ef 5 лет назад
This is dope!! So you're running completely stock block with everything else but the turbo and injectors?
@mxz700MN
@mxz700MN 5 лет назад
the only thing that is stock it the (longblock) the head , pistons ,rods , crank. everything else is custom!
@aidanwagner7480
@aidanwagner7480 5 лет назад
I’ve got a stage 2 gti it was on 32 psi, now it’s 20psi for daily driving and it held up for a long time. I wanna put a fresh 1.8 and go for E85, what are the details on this build??
@matthewtsai9707
@matthewtsai9707 4 года назад
Using TDI Rod and piston to save your money
@austinclark2816
@austinclark2816 Год назад
What rim are they
@MrRey007
@MrRey007 3 года назад
who tuned your car bro? motoza?
@dryan084
@dryan084 8 месяцев назад
Whats them Rims??
@javidgunraj1500
@javidgunraj1500 Год назад
curious if any of the fuel lines were changed for e85?
@kanggoo57
@kanggoo57 5 лет назад
is it the 1.8t 150hp engine originally yes?
@robertwright7874
@robertwright7874 4 года назад
What wheels are on it when you showed the dunk clip
@carti4644
@carti4644 3 года назад
Does this have steps
@AdamSabchareun
@AdamSabchareun 6 лет назад
This was on a completely stock motor ? Any problems ?
@mxz700MN
@mxz700MN 6 лет назад
Adam S yes stock longblck! And now im running it at 35psi. Now!
@LUISPEREZ-nl2ri
@LUISPEREZ-nl2ri 5 лет назад
@@mxz700MN can you tell us your set up , sound crazy
@geohudson2125
@geohudson2125 5 лет назад
wow stock ve 1.8 long block how !?? I'm so confused how?? have you not blown this motor up that's alot of power & crazy torque!! sounds good on boost ; ) I'm learning here lol
@airizonaforu
@airizonaforu 3 года назад
How tf do I get ahold of this chuck fab guy i want a manifold
@JNAMOTORSPORTS
@JNAMOTORSPORTS 9 месяцев назад
Needs cams
@jacobg7637
@jacobg7637 3 года назад
How long did it last on stock internals
@ryanguthrie1370
@ryanguthrie1370 5 лет назад
What block is in it?
@cyrusthevrus
@cyrusthevrus 5 лет назад
Nice ride but I have a question.. I own an golf mk IV 1.6 sr stock engine and I have the same problem as you in the beginning when you started the engine it almost stalled but then 800rpm idle.
@mxz700MN
@mxz700MN 5 лет назад
I think it does that because it has big injectors and is on e85
@WPTUNED
@WPTUNED 5 лет назад
That dyno setup was painful
@mxz700MN
@mxz700MN 5 лет назад
painfull? haha I want to get it back on the dyno it's at 36psi now, but I blew up the trans last week unfortunately
@WPTUNED
@WPTUNED 5 лет назад
@@mxz700MN yeah the fans on that setup are no where near man enough for that level of power! You need it tested somewhere with a serious wind machine lol and I'm not surprised running 36 psi!! Awesome work nevertheless
@theg-squad4191
@theg-squad4191 4 года назад
How much this it run for the whole setup??
@912cal28son
@912cal28son 5 лет назад
How is it possible that your water bottles didn’t fall out of the cup holder?!?
@mxz700MN
@mxz700MN 5 лет назад
good cup holders haha bottles were not that full also haha
@1022crazyboy
@1022crazyboy 5 лет назад
What ecu reflash are you using?
@justrice422
@justrice422 3 года назад
Blows motor 3 days later .. but seriously I want one of these
@mxz700MN
@mxz700MN 3 года назад
the first engine lasted for about 2 years a full year of 35psi on the s257 turbo bent a rod when I turned it up past that lol
@morgynnmalsbury96
@morgynnmalsbury96 5 лет назад
Is this car still alive? If not how long did it last on this setup??
@mxz700MN
@mxz700MN 5 лет назад
it's still alive and running good. it made 37psi last week when I had it out and almost 2 years now! 8000 miles or so
@CtdnCA
@CtdnCA 5 лет назад
@@mxz700MN about how much $ for the build? I just got a jetta and was wondering if id be able to hit simliar numbers haha
@mxz700MN
@mxz700MN 5 лет назад
@@CtdnCA to do everything i have done to the car probably more than 10k. but if ypur just do the turbo setup clutch and a diff probably could get it done with 5000!
@pugsasb1473
@pugsasb1473 3 года назад
How long did this setup last and is it seriously on stock rods because from everything I’ve been reading the stock rods can’t handle that much power anyway you could give me more info on this please
@jboy7339
@jboy7339 3 года назад
Stock rods can’t handle a quick spooling turbo... Get you a big turbo so the boost kicks in later in the rpm range and your good on the 1.8t 👌
@landonmiller245
@landonmiller245 6 лет назад
So your at 415 horse on 27 psi. My jetta is at 21 lbs boost. Any clue on what HP numbers I would get? I was told around 210-220 lol. From looking at forums that seems to be what everyone is getting.
@mxz700MN
@mxz700MN 6 лет назад
probably around 210 with a stock turbo. my engine is a stock longblock with a big turbo on it s257sxe
@betaboyz7220
@betaboyz7220 5 лет назад
Hows the motor holding up after some time?looking to big turbo mine but dojt want to go into tearing apart the motor (yet)
@mxz700MN
@mxz700MN 5 лет назад
motor is still running awesome! the problem is the trans is blown I'm in the process of swapping it now !
@betaboyz7220
@betaboyz7220 5 лет назад
@@mxz700MN ive gone through a couple myself 😂
@JACKOFALLFATES
@JACKOFALLFATES 5 лет назад
@@mxz700MN i broke my trans with a stock 2.0 NA lol. 02J are shit. i say get an 01E 6 speed w/ the drivetrain and make it AWD.
@torrinscichlids
@torrinscichlids 4 года назад
what kind of wheels and size dimensions on the scene where you're dyno testing please? I'd love to know
@mxz700MN
@mxz700MN 4 года назад
they are rotiform nue 18x9.5 +35 offset!
@boostedlawnmower9955
@boostedlawnmower9955 5 лет назад
Tuned on stock ecu ?
@husseymangtv
@husseymangtv 4 года назад
How does your hood close with those pipes like that? Lol
@jermainecoleswagg
@jermainecoleswagg 6 лет назад
Ever run into n75 valve problems? Ive used pretty much every forged one. None hold boost. What valve are you running?
@blueberryhashplant
@blueberryhashplant 6 лет назад
Jermaine Coleman mbc
@kamilthegreat2834
@kamilthegreat2834 5 лет назад
I used to have the same problem with my stage 2 on stock ko3s. Would spike to 24 psi then down to like 15 and back up and down. I've had it hit 28 PSIA few times. Manual boost controller along side the stock n75 is your answer. And let the ecu have a few miles to adjust after every incriment of the MBC
@nijazsarajlija41
@nijazsarajlija41 5 лет назад
what do zou recommend internal or external wastegate and why.
@mxz700MN
@mxz700MN 5 лет назад
I have a external waste gate mounted on the turbine housing . I like it a lot it bleeds pressure evenly on the t4 exhaust housing and it's easy to change the spring. I have a precision wastegate and have never had problems with it. hope this helped!
@WilliamsonProductio1
@WilliamsonProductio1 5 лет назад
See boost but what are the other 2 gauges?
@mxz700MN
@mxz700MN 5 лет назад
it was volts and oil pressure at the time I think but now i have a afr one also
@real32233
@real32233 5 лет назад
I just got a 4 door sedan jetta gls what should I Do with it?
@mxz700MN
@mxz700MN 5 лет назад
e85 big turbo. elm manifold to start
@alexandromontoya3839
@alexandromontoya3839 Год назад
What turbo do you have in it
@mxz700MN
@mxz700MN Год назад
it's a borgwarner s257sxe 7670 !
@jshaw382
@jshaw382 4 года назад
@hp_enthusiast what’s your wheel set up they are cleeaaaan
@mxz700MN
@mxz700MN 4 года назад
Thank you! they are 18x9.5 rotiform nue wheels +35 I believe
@tadman3d
@tadman3d 3 года назад
Why no torque figures. Torque kills rods. But you claim a stock engine. But only hp figures
@paco_rider
@paco_rider 4 года назад
I have a 1.8 tfsi and i’m affraid to just remap it cause i think they are weak engines.....
@mxz700MN
@mxz700MN 4 года назад
if you have a stock turbo still I wouldn't be afraid of remapping it
@elPimius
@elPimius 5 лет назад
Bro, the pistón are stock?????
@mxz700MN
@mxz700MN 5 лет назад
Yeah! The head and bottom end are completely stock.
@elPimius
@elPimius 5 лет назад
hp_enthusiast men I have an audi tt (240hp stock), you think it would hold 350 hp? Haha
@mxz700MN
@mxz700MN 5 лет назад
@@elPimius Im sure it could with the right turbo setup and e85!
@nex9143
@nex9143 5 лет назад
The engine will give in. Have fun whilst you can before the head blows off with “stock components”
@mxz700MN
@mxz700MN 5 лет назад
8000 miles on the big turbo setup
@bautistavazquez6295
@bautistavazquez6295 5 лет назад
He mad
@richdf5664
@richdf5664 5 лет назад
A lot of vw/audi engines hold a pretty good amount of power
@terrancejohnson5828
@terrancejohnson5828 5 лет назад
Where did you get the pillar gauges I need to move mine from above my radio
@mxz700MN
@mxz700MN 5 лет назад
I got the pillar pod from eBay or Amazon I think. the gauges are gloshift
@terrancejohnson5828
@terrancejohnson5828 5 лет назад
hp_enthusiast is it decent quality for the amount it cost
@jerryfullen5043
@jerryfullen5043 5 лет назад
What all have you done to your Jetta???
@mxz700MN
@mxz700MN 5 лет назад
I made a video on everything I have done to it!
@thatcumminsguy6407
@thatcumminsguy6407 6 лет назад
Where did tou get that grill from
@mxz700MN
@mxz700MN 6 лет назад
Corvette1985 It was on the car when I bought it! so I don't know!
@castin5244
@castin5244 5 лет назад
It's just a cheap ebay grill
@Basstaco69
@Basstaco69 4 года назад
How much money in parts do you think is here?
@mxz700MN
@mxz700MN 4 года назад
you could probably get it done for around 5,000 just for the turbo kit clutch and differential. but I have way more than that into it now
@ddubz6356
@ddubz6356 6 лет назад
Do you have a link to these "chuckfab" parts i cant find them anywhere. Or are you chuck lol. And do they make the parts for the 2.0? Im gonna build my block bulletproof and turbo it
@mxz700MN
@mxz700MN 6 лет назад
Demonik chuck is a local guy to st. Paul minnesota. and he hand makes all the "Chuckfab" parts send me a message and I can get you in contact with him!
@ddubz6356
@ddubz6356 6 лет назад
Thanks dude i appreciate it idk how to message on here. Whats his name on facebook?
@boostedlawnmower9955
@boostedlawnmower9955 5 лет назад
Still going ? Thinking of going t04e ~300-350whp on a stock awp
@mxz700MN
@mxz700MN 5 лет назад
I just had to replace the engine last weekend if lasted for 2 years on the original awp enging all last year I ran it at 36psi! I would run e85! and a tubular exhaust manifold
@boostedlawnmower9955
@boostedlawnmower9955 5 лет назад
@@mxz700MN Wow that gives me hope. Im at 270crank hp with the stock ko3s on e85 & im ready to go big turbo lol. Did you dyno tune on the stock ecu ??
@MrSpikesIsMe
@MrSpikesIsMe 4 года назад
What exhaust are you running?
@mxz700MN
@mxz700MN 4 года назад
chuck fab custom hood exit🤘
@oso1318
@oso1318 5 лет назад
Bro can you give me like a list o everything you got to get that power please
@mxz700MN
@mxz700MN 5 лет назад
I'm going to do a build breakdown video soon!
@oso1318
@oso1318 5 лет назад
@@mxz700MN ight thanks
@NachoBides
@NachoBides 6 лет назад
How many miles do you have with this setup now?
@mxz700MN
@mxz700MN 6 лет назад
Nacho Bides about 5-6 hard miles.! Just getting it back out after the long winter!
@NachoBides
@NachoBides 6 лет назад
hp_enthusiast Interesting! It seems that bigger frame turbos and conservative tuning is the trick to keep the rods in the block.
@mxz700MN
@mxz700MN 6 лет назад
Nacho Bides yes! That and e85! And my tuner said a equal length manifold is just as critical dont use a log style manifold.
@NachoBides
@NachoBides 6 лет назад
hp_enthusiast Could you upload an acceleration video showing the instrument cluster? I would like to see how it builds up boost
@mxz700MN
@mxz700MN 6 лет назад
Nacho Bides ill do that in my next video but, for now the last clip in this video is the cluster doing a pull on 25psi
@BrendanCudmore
@BrendanCudmore 5 лет назад
What wheels on it in the dyno clip?
@mxz700MN
@mxz700MN 5 лет назад
rotiform nue 18x9.5
@BKP2899
@BKP2899 2 года назад
when people wanna sleep on VW’s i’m just gonna show them we can make stupid amounts of power with stock internals
@thechettosracing9386
@thechettosracing9386 4 года назад
You forged something to make big turbo?
@mxz700MN
@mxz700MN 4 года назад
nope it was a stock 1.8 awp long block with a custom big turbo kit!
@thechettosracing9386
@thechettosracing9386 4 года назад
@@mxz700MN You bring it original with 1.8T Double Tree Block
@mr.schmoe5867
@mr.schmoe5867 5 лет назад
What trans is this? O2j?
@mxz700MN
@mxz700MN 5 лет назад
yes eha o2j 5 speed
@TheMainMan318
@TheMainMan318 5 лет назад
What wheels are those
@mxz700MN
@mxz700MN 5 лет назад
rotaform nue 18x9.5
@Demolidor4ever
@Demolidor4ever 4 года назад
Stock pistons?
@mxz700MN
@mxz700MN 4 года назад
yes! it's a stock awp long block with a big turbo strapped to it haha
@tadman3d
@tadman3d 5 лет назад
Any 1/4 mile time?
@mxz700MN
@mxz700MN 5 лет назад
I've only done 2 passes with no launch control it did a 3.1 sec 60 ft. and 14.9 at 115mph mph. the ecu has the launch control now but the trans is blow up hoping for a low 12 with launch control
@DustySteel
@DustySteel 4 года назад
Is this a AEB block?
@mxz700MN
@mxz700MN 4 года назад
it's a awp 06A!
@DustySteel
@DustySteel 4 года назад
hp_enthusiast nice! I have a Audi 1.8T Quattro AEB 058. I have the Eurodyne Maestro Tuning Suite with PowerTap for tune and just went to 440cc tune.
@mxz700MN
@mxz700MN 4 года назад
@@DustySteel nice! I'm putting a aeb head on my next engine! and i have a IE Intake manifold for longitudinal 1.8ts they are discontinued
@DustySteel
@DustySteel 4 года назад
hp_enthusiast nice! Those are cool! What tune are you running?
@stephanielopez4947
@stephanielopez4947 4 года назад
Stock turbo is on it ?
@mxz700MN
@mxz700MN 4 года назад
no it's not a stock turbo, it has a borgwarner s257sxe turbo
@addio1226
@addio1226 5 лет назад
Do you have an Instagram?
@mxz700MN
@mxz700MN 5 лет назад
yeah hp_enthusiast
Далее
BIG TURBO JETTA ROLL RACING! (POWERCRUISE 2018)
14:21
УГАДАЙ ЕДУ ПО ЭМОДЗИ! #shorts
00:57
Просмотров 190 тыс.
Whoa
01:00
Просмотров 6 млн
Building My MK4 Jetta 2.0 Turbo in 10 Minutes!
10:03
Просмотров 281 тыс.
VW Bora 1.8t. The motor that many wanted.
15:45
Просмотров 19 тыс.
1.8t jetta gt3071r 27psi pulls
1:54
Просмотров 41 тыс.
Mk4 GLI 1.8T 3 Inch Catless Downpipe
6:17
Просмотров 194 тыс.
BIG TURBO JETTA BUILD BREAKDOWN AND OVERVIEW!
13:53
Просмотров 20 тыс.