Wringer washer Maytag service manual 

Those were the days when they made quality and their simple design made them last for years. Thanks for the great comment. Tim😃

Your welcome hope it was helpful. Tim 😃

Btw, where can i order the same book you got there ?

I bought this manual 38yrs ago, but I think you can get it at Cottage craft works. I bought mine at a appliance store which doesn't exist anymore. Tim 😃

My manual is 38 years old I'm not sure if you can find one or not you can look on the web but if you know what you need you can look on Ebay I have found alot of things there. Let me know. Tim and Rosiemae.

@@timkessler4894 why dont you scan into a PDF file and share

Daves Repair is where you can order a Manual or can go to cottagecraftworks.com/maytag-wringer-washer-power-unit-parts and download for personal use. Both Daves Repair and Cottage craft have various parts or can send you in the right direction for the parts. davesrepair.com/pdfmanuals/mytJ2partsman.htm I had purchased the J2L a year or so ago and an currently preparing it for use. On Ebay you can also find most parts if you know what you need.

I use these 2 sources really good. It's great to know that they are there. They are great to do business with. Tim😃

I'm not sure maybe you can get one at Cottage Craft Works I thought I saw one there. I bought mine almost forty years ago so I don't think mine is available anymore. Tim

I tightened the tension springs all the way because I need the wringer to wring they only go as far as the threads allow you can go as far as you want but make sure that the same amount of bolt is exposed on all four bolts you don't want them uneven. Let me know if you have any questions. Tim😃

Did you reset the tension using the reset handle if it still not locking you my have a mechanism problem in the wringer cap let me know. Tim

I'll bet it is that centering spring for the release bar it's not locking the tension bars out. You have to get a new centering spring check out my service manual under wringer cap maintenance there it shows you that spring. Hope it helps you. Tim

I'm still thinking about it I want to at sometime I don't have grandkids to ask when the time comes I hope it will be easy. Tim 😃

I bought this manual 38yrs ago they were readily available then not sure where you can get it now parts were the same thing. You can try Cottage Craft Works for one. Tim 😃

@@timkessler4894 thx, I downloaded the manual they have on their site

Is it like mine I've never seen it I'll have to check it out myself. Mine is pretty complete. Hope there's will help you. Tim 😃

I am not sure I find some parts on Ebay and some of them are questionable they look really old.But some of the parts are really good I look them over before I buy. Tim.

Posted link on Betty Taylor message to where one can go to locate parts. Amish still use the machines and manufacture parts for them. I am waiting on some parts currently.

You just pull up on it. But before the machine is 1/2 empty don't let it empty completely. It will be really hard to get it off. Let me know if you are still having trouble. Tim😀

Yes I have just the bottom roller the teeth on the end wear down but thats the only time I keep a close eye on it.Tim

@@timkessler4894 Yes I have a Queen that I need to do something with the rollers they are cracked bad enough that they don't ringout as good as my Maytag

I just recently put some duct tape on the end of my bottom roller it was knocking really bad it seemed to fix it for now rollers are hard to find.Hows the motor doing on May I noticed it wasn't running very well you will probably have to take the motor out and have its bearings and bushings replaced??🤔🤔🤔 Tim and Rosie

I bought the manual 30 years ago from a appliance store I don't know where you can get one now sorry 😂😂😂. Tim and Rosie

Could you post a picture of the wringer washer I would love to see it? Tim and Rosie 😃😃😃😃

I found a place where you can get a owner's manual for the Maytag wringer washer go to www.davesrepair.com you can download and print a owner's manual there.Tim and Rosie 😃😃😃!

@@timkessler4894 thank you so much, but he's out of business. Tried down loading one of his aps for 8 dollars and ended up with nothing

@@timkessler4894 also I found the Maytagclub.com with everything I need

😢

I think Cottage Craft Works has the manual but I'm not sure you can look and see. Tim 😃

There are 2 ways to add 1 through the vent hole on the wringer post under the machine I use a special oil can that will fit in hole but you have to add it slowly and use a 90 weight gear oil. 2 you have to have a special tool to do that one and you have to be careful because it will vapor lock and you'll have to turn the belt pulley to free it. Tim

What special tool will I need? Can I use a syringe?

@@kathyschauer2114 yes you can but it but it will be a tight fit if you can't get the syringe with the pump pulled all the way up use a flexible drinking straw on the end of the syringe that should fit in the hole on the machine I hope you know where it is it's under the machine between the power unit and the leg of the machine on the wringer post the hole is right in the middle of the post hope you know where that is let me know if you have trouble. Tim

@@timkessler4894 the wringer heads just lift off. Can you pour oil down the drive?

@@pl747 I take the wringer apart and repack the grease in the wringer head it is easy to do just a little work. Tim😀😀