Yamaha TT600 Carbs 

I have a 2003 year production model. Same carb setup. If they are setup correctly the motor runs very well and fuel mileage is good. The problems comes in when people try to "tune" them to do what they're not designed to do.

Finally a chanel about the two things i love. Scotland and Motorbikes. :D Cheers.

If you drill out the secondary by 2 sizes it opens up the power like crazy! As well as making the secondary opens a little quicker with the adjustment.

I know this video is a few years old but just wanted to say thank you for the good quality video. I've been working on an 83 tt600 and the previous owner completely botched the carb. I finally figured out that previous owner had the slide in upside down (I'm sure they gave up on the bike and sold it to me for cheap ($500) when they couldn't get the carb to go back together properly). Oddly enough the slide fit, just not correctly enough to make it all work. I also found 3 missing hoses, a missing spring, missing air fuel screw/spring/washer/o-ring, missing air intake tubes (which I had to order from England of all places), plus everything was loose. Lol, the main spring gets delivered tomorrow so I'll see if it actually runs now. I used your video as a guide to compare mine to and again just wanted to thank you for taking the time to put up this video since it helped me much more than you would understand.

I have 1990 tt600 59x white frame... Is stil a beast

Hey man, like you're vid, I've bought a 600 2001 I guess, runs really good, way better than my GS 650 😅 but the carbs are really wierd I hope that they wil live a long time haha

Awesome bike as are all Yamahas.

I have my dads old 1983 TT600 I’m going to restore. It’s been sitting for about 20years. So it will need a lot of work

That motor is capable of very impressive power with minimal work to carb and air box.

The dual carb setup was used in an attempt to reduce lag and increase throttle response. These days, I’d put a pumper on it.

They got rid of it. Wait my xt600e 2003. Last production year still has this system. And it's actually REALLY genius. It's basically a fake 3 to 4 valve system that increases the low end RPM. And makes sure the engine can't fall on its face with getting to much air

got 1985 xt 600 cant figure the spark system wiring out everything there just cant get spark from rectifier

Did you ever make the playlist for this bike? I couldn’t find any more videos

, hello, my XT600 emits a lot of smoke and I tried replacing the ring piston and the calf seal but it still smokes, what can be the problem?

i dont know where wires go from rectifier and cdi please help me confused

How does the choke work? Cant see it "choking" really?

Where did you get the carburetor from ????

I do have some hop up info if you so desire.

My tt600 won't idle is the fuel mixture screw the one underneath the carby

I have a belgrada ttr600 but the carbs are gone are the carbs from tt600 work on ttr600?

My 2003 TT600R doesn't fully revert to idle when I release throttle, can get it there by blipping the throttle but it's a pain, any ideas, previous owner had it cleaner with no improvement

Hi what do you use in your ultrasonic cleaner?

Wanna work on my 83 tt600? It won’t start but it’s in great condition and gets great spark

Is there a way to convert it just to one carb to operate both sides? Anyone. Just saying because I just purchased a xt 550, but it didn’t come with a carb was wonder there any other way to get carb on there?

my 2003 xt600e won't start. got progressively harder to start it but now won't fire up. always ran well. no local mechanics. a bit scared to get the carb out. any ideas gentlemen?

I have a 1980 tt600 every time I decelerate to idle it dies , I've set it to the manual, but it makes no difference. Any ideas anyone.

friend where can I buy the device to clean the carburetors, and what is it called

Brush up on starting process! They bite!

Wished you would of showed the carb bowl i have a 550 that leaks fuel from the overflow when the bike is off. while it's running it's ok just when it's off it leaks. I put a new needle and seat in it an still leaks. i think something is missing in the carb bowl for the overflow on mine the hole is halfway up the bowl with no tube. I've done other bike that have a overflow tubes in the bowl. Nice video anyways

Do u know mine takes a while to return to idle?

I own one just like it and was wondering where do you add oil for oil changes?

Anyone recommend a aftermarket alternative carb for the TT?