Procedure:
1. Remove Degas Bottle - Remove the two 8 mm mounting bolts and the two small coolant tubes.
Rotate and push degas bottle off to the side.
2. Remove air filter
3. Remove turbo inlet
4. Remove FICM hold down bolts (do not unplug FICM or injectors). Push FICM off to the side.
5. Remove the four heat shield bracket bolts and push it to the side (Take care not to damage
the ground wire. Rewire the eyelet if needed.)
6 Unplug IPR wire
7. Install special IPR socket and unscrew IPR using a 1 1/16 wrench.
8. Reverse the above to install
17 окт 2024