DJI Mavic 2 Pro - How to Calibrate the Vision System Sensors 

great video, i was confused by the process but you got me through it !

After 3 times 😂 the 4th one went well. Thanks dude, good content. Seams like I have to manually restart the drone mavic pro 2

Love the video, you should come shoot in Buffalo, NY!

Great video and information thanks for sharing cheers

Thanks... Informative... Will surely do it asap

BIG THANKS! I crashed my drone inside the concrete hall (because of compass error?) After that drone was giving "forward vision sensor calibration error" and I actually thought the sensors are broken. I was searching how-to video to replace the sensors but I found this video. After I did this calibration (and replaced the propellers ofc) it works like a charm again! THANK YOU!

Hi 🙂 Thank you for your help👍👌✌

Yippee! It worked! Thank you Edward!

cool. didnt even know you could/should do this..thanks!

Very helpful thank you !

👍👍👍Thanks 🙂

Hi i have a problem fwd and bkwd unavailable can u pls help fix this problem

Really helpful, thanks - but incredibly frustrating !!

Does anyone know what you are suppose to do when your OS is after 11 and the app wont launch?? i have been trying to find work arounds but no clue what to do.

I was about to ask why didn’t you take off the gimbal cover - does leaving it on destroy the gimbal when it turns on?

Hi I need help on my mavic 2 pro I have left vision sensor error but both show disabled in app and also my front ones show no errors but do not work even tho app shows front and back should work I tried calibration in asistant 2 app on pc and it couldn't pick the green box up please help its on latest software version

hii Edwar..i have big issue on matching the red quadro with the green one..what can i do?

Can you do this on a MacBook Pro M1 chip ? I have the everything downloaded and when I go to calibrate it won’t load

I get all the way to the end, where it says ""calibrating 0%" and it does nothing. a red sentence comes up saying "make sure you are connected to the internet" but I am. It never finishes calibrating. I completed all of the scan steps but it never internally finishes. Please help!

HELP ME PLEASE Congratulations for your video more than exhaustive I did my procedure for my mavic pro 2 just following your instructions I must say that first of all I don't find a double window like you in dji assistance 2 for mavic then once I finish the calibration procedure of all the sensors at the end of the construction of the log file the procedure rikane stops at 0% and is unable to close the procedure I was wondering if you could help me understand why this ever happens and possibly how I can solve it I state that like you I have both an imac and a notebook with windows 11 and on my imac I also installed windows 10 but with both the problem remains thanks for everything and I look forward to your info

Do you know the error of not showing battery in mavic 2 pro?

It keeps saying my are is not folded in when the plug is in the way how do I fix this. Have tried to do it many times

I have tried so many times and only get into it about 5 seconds of the 1st step and movement error. Came real close to having a custom Imac Pro monitor that has a Mavic 2 sticking 1/2 way out of it. Ridiculously difficult to accomplish and just had to give up. Thanks for the video though....god bless whoever can get through it

How do you know it is time to calibrate the sensors?

Hello. Today I got warning ⚠️ ;breaking now return sticks to top point. Is it about calibration?

I couldn't calibrate the side sensor because of the usb cable. The assistant can't detect the calibration image. The usb place is totly wrong. What can I do. There is no way to properly fold the arm

Due to sheer laziness on my part, I neglected anti-collision sensor calibration on all my Mavics, thinking that because I fly all my drones with the obstacle avoidance sensors deactivated, I shouldn't have to bother calibrating them. That logical presumption of mine turned out to be dead wrong because even with all the sensors always turned off my Mavic 1 Pro confounded me for months by stopping randomly during waypoint missions, often with the result that the battery came perilously close to draining low enough for the drone to force-land far from home due to battery charge levels dropping below that critical 10% level. By finally biting the bullet and laboriously calibrating the anti-collision sensors on my DJI drones, the stuttering stop-and-go flight behavior of my Mavic 1 Pro ceased immediately and the drone has flown smooth as silk ever since, while also filming sharply focused footage that was inconsistent at best before the obstacle sensor calibration I belatedly carried out. I simply had no idea that failure to calibrate obstacle avoidance sensors is ESSENTIAL regardless of whether those sensors are toggled on or off during flight. In trying to calibrate the sensors on my Mavic 2 Pro for the first time, the main problem I have encountered is that after completing the calibration of all sensors front, back, and sides, the calculation phase of the process remains stuck at the 0% stage, and does not budge thereafter. I'll give it another shot but now that I know how absolutely VITAL the calibration of obstacle avoidance sensors is to preventing the loss of the drone, I won't dare fly my Mavic 2 Pro until I succeed in this calibration process and see that calculation indicator scrolls up to the full 100% completion status before I power off the drone and disconnect it.

Can NOT download app on my Mac OS of 11.7.1. Any way to do this?

When I am trying to calibrate the left sensor on the left side the green box does not come up on the screen also the little box in the lower left-hand corner that would show the video that’s coming from the sensor actually is not there that little screen is just black does anyone know what this is or how to fix it I’m wondering if there’s actually something wrong with the drone

I can't install the software - I can't get past the entering the password part. Help!

I am following the same process and my battery is also 100% charged. But still it is not connecting. Please help me through this, it will be a great help sir...

DJI needs to fix this process, it seems way too complicated, on the rare occasion that I am able to get through the process without countless error messages it stays on 0% calibrated forever, and the only way to get out of it is to quit the app, I need to try on a friends windows computer because on the download for the DJI assistant app it shows you a message that it is not compatible with macOS 11 and later, really disappointing as I have noticed many errors with my drone due to the fact that it hasn't been calibrated.

The calibration gets stuck at calculating @ 0%. Should I shut it frown or wait? It has been 20 min so far

did that hundred times still tells me calibration failed

This has got to be the most stupid thing DJI has come up with. I got through this once after an hour of trying to get it to work. Now it's several months later and it wants me to run this again. Not going to happen. The drone works fine and my still shots look fine also. Thanks for this video though. I wouldn't have gotten through the first time without it.

Mine keeps getting stuck at 0% when calculating. what am i doing wrong?

I cant get the dots to show up

Oye viejo no le quitaste el protector de la cámara en la primera prendida del equipo..sólo por esa razón no me gustó tu vídeo

Been on 0% forever. Calibration information collected. Calibrating…

The dude in the video isn't helpful for troubleshooting. For anyone else having problems getting the dots to appear and are having the same "enter window size" pop up box show, keep u unistalling your dji assistant application accordance to the drone you are using while also changing your resolution size for your monitor. I did a 1366 by 768 and I got it after a couple of tries so I could update my sensors I'd like my ❤️ now sir