Found and Fixed! 1994 7.3 Powerstroke Crank No Start 

Love the sarcasm! I’m subscribing just to see his future fixes! Good stuff! We all been there but u say it

Love it, keep ‘em coming

Good information! My truck is a 97 7.3 270,000 miles. Been a fantastic truck!

My 94 did the exact same thing 2 years ago.I would replace the cam position sensor and it would run fine but about 2 weeks later it would do the same thing again.I had just replaced the cam sensor and it died but started back up so I popped the hood and it was dark on the side of the highway and I saw a spark.the 2 wires between the ipr and the connector were both bare and would touch intermittently so it was kinda like how you found yours.I bought the pigtail from Riffraff where I buy most of my stuff for the 7.3.that was a really good video I didn’t think of making a video because I was thinking it was just my truck having trouble.😂

'This is a brutal sandwich' - The Jouanimal

Thanks man.

Same wiring issue with my 96f350. Thank you

When you do the clutch make sure you replace the sleeve that the throw out bearing rides on. Get an oem or equal. Also rock auto sells the fuel bowl cheap it comes with all the wires that you had to replace because of leaking diesel. Last burned out pins at the connection for the under cover harness are common. You can splice pigtails in or buy a small kit that comes with new plastic connectors and metal clips. It also has the metal pick to get the wires out if the connector. The leaking diesel on the back of the heads is because the orings are worn out where the fuel lines connect to the heads. When you pull the transmission you will see them replace them then.

Thanks for the info, i got my hands full with my 1997 7.3. Where did you get your headlights from? Nice.

Way before i went to mechanic school i was always taught to remove all jewelry before working on anything.

I’m having the same issue in my ‘97. It cranks and starts fine one day, next day it cranks/no start and no smoke. Thanks for the heads up. I’m gonna investigate the IPR. Don’t go and sell yours. You’ll hate yourself later

I went to diesel engine mechanic school before they had all them eec.I have seen a drop of water shut em down

Did you happen to have a no ‘wait to start’ light as well? I’m having this issue right now my truck started fine this morning and while warming up it shut off then crank no start and no smoke out the tail pipe, but she sat for about 10 minutes and the wait to start like came back on and started again, then shut off about 30 seconds later then again crank no start and no smoke out the tail pipe

Yuuuuup mine is doing the same thing

How's the truck been running since then?

Greetings, I have a 1995 Ford diesel power stroke 7.3, it starts perfectly but it doesn't want to accelerate and I changed the accelerator pedal and the computer and it remains the same, what could be the cause? I need your urgent help, it is a crane and it is my method of working and I have been on foot for 3 months.

Link to the harness you purchased?

Where’d you get those headlights

Heavy caution If your watch were to contact with the alternator stud heavy danger. Just saying The old school guy.

Don't take the FORD camping,,lol

had the same thing happen to my truck .

Where you able to do injector buzz test when it wasn’t working?

I hope this is our problem

I know the agony of working on these trucks 😅

Good stuff but too long winded and repetitive. Get to the point!