Тёмный

Honda Fit door lock actuator problem - Part II 

Project_Mewoosh
Подписаться 752
Просмотров 4 тыс.
50% 1

In this video you'll see me replace the drivers door lock actuator motor in my 2009 Honda Fit Sport. After some testing (and a minor gamble cuz I wasn't certain this was in fact "it") I officially rip my door apart and replace the lock motor to stop the door lock from cycling over-and-over whenever you lock the door.
What I'm hearing is that one of the doors can't tell it's locked so it tries to 'fix it'. This happens when the door auto-lock on takeoff or when you lock the doors with the key fob thingy and walk away.
By strategically removing relevant fuses (one-at-a-time) I found that with one pulled everything worked except for the driver's door itself (so I had to lock it manually with the key). That told me I had to replace the drivers door locking actuator unit.

Хобби

Опубликовано:

 

29 сен 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 7   
@stuartbillings2589
@stuartbillings2589 Месяц назад
Very good video, except for a few clarifications, as I just did this repair this morning (5/21/24) and it took about 1-1/2 hours with 2 persons: 1) Make sure your window is in the up position before you begin; 2) Be sure you have Japanese metric #3 Phillips head screw drivers as the American versions do not fit correctly in the screw heads; and 3) MOST IMPORTANTLY, all the videos about this repair skip over the difficulty of removing the 3 screws that hold the door latch in place. YOU MUST USE A IMPACT SCREW DRIVER WITH THE CORRECT BIT and even then, you may strip the screws! Use some kind of "liquid wrench" on these screws before even starting. We used an old time manual impact screw driver with a mallet and it took sometime to get the screws loose and out. We even had to use a small torch to heat up the screws to get them to loosen up enough to remove. Finally, be sure to use official Honda parts as the aftermarket stuff (from China) is crap and will not last long, if at all. Also be sure to include the foam tape in your parts list as you will NOT be able to reuse the existing foam on the old assembly. Good luck. It is worth the effort as your local Honda dealer will charge you $1,200-1,800 for this repair. The parts from Honda are about $330 as of May 2024.
@ZachBeason
@ZachBeason 7 месяцев назад
This is by far the best and most descriptive video on making this replacement happen. I just finished mine outside in 38 degree weather. The door handle connecting rod was the biggest issue for me. I needed to use needlenose pliers to pop the rod out through the hole on the handle.
@latinacreekside
@latinacreekside 4 месяца назад
Thanks this video help my husband fix my doors. Did two in 1 hr😊... hi from tx
@Stancedude1
@Stancedude1 6 месяцев назад
Great video thank you!! Whenever lock the car and walk away. Door tries to lock itself( cycle). Which is causing my aftermarket car alarm to go off.
@originalhat
@originalhat 2 месяца назад
Did you go OEM or aftermarket on the replacement actuator?
@jebus914
@jebus914 16 дней назад
I went to go look if the OEM part has weatherstripping and it also does not. Additionally, the replacement Honda part is made in China, not Japan. Not sure if OEM is worth 13x the expense. Hoping the one I ordered solves my door lock issues.
Далее
How To Re-Key or Repair a Lock (Honda High Security)
23:34
Лайфхак для дачников
00:13
Просмотров 15 тыс.
Why Am I The ONLY Mechanic That Can FIX This Honda Fit?
20:04
2013 honda fit door lock removal
10:05
Просмотров 37 тыс.
Toyota power door locks not working (Fix/Solved)
8:45
Просмотров 488 тыс.
Honda Fit Door Lock
4:18
Просмотров 101 тыс.
МОЖНО ЛИ ОДЕТЬСЯ ЗА 1000₽?
0:44
Просмотров 4,3 млн