How to Make a CNC Alphabet Piggy Bank | ToolsToday

Подписаться 1 млн

Просмотров 13 тыс.

50% 1

What do you think of how this project turned out? Making a wood and plexi Alphabet Piggy Bank using Amana Tool® CNC router bits on the Stepcraft M.1000 36” x 48” CNC machine. www.toolstoday.com/?...
The downloadable and customizable CNC plans for this project are available on our website with item no. ALPHA_BANK if you want to make this project yourself! www.toolstoday.com/cnc-alphab...
CNC Cam Clamps for Workholding Wasteboard, plans are available here, www.toolstoday.com/cam-clamps...
I started by using some X-Fasten double sided tape on to stick down the acrylic and started cutting with the Amana Tool no. 45626-K 3 flute 1/4" diameter 90° Spektra™ coated v-bit, all these tools are available on our website!
Feed, Speed & CNC Running Parameters
Amana Tool 45626-K SC Spektra Extreme Tool Life Coated V-Groove 90 Deg x 1/4 D x 1/8 CH x 1/4 Inch SHK 3-Flute Router Bit
www.toolstoday.com/v-14487-45...
RPM: 14,000
Feed Rate: 60ipm
Plunge Rate: 20ipm
Max Depth of Cut: 0.10”
Amana Tool 51411-K Spektra Coated SC Spiral O Single Flute, Plastic Cutting 1/8 D x 1/2 CH x 1/4 SHK x 2 Inch Long Up-Cut CNC Router Bit with Mirror Finish www.toolstoday.com/v-13759-51...
RPM: 14,000
Feed Rate: 60ipm
Plunge Rate: 30ipm
Peck Drilling: 0.063” per pass retract above start depth
Amana Tool 51404-K CNC Spektra Coated SC Spiral O Single Flute, Plastic Cutting 1/4 D x 3/4 CH x 1/4 SHK x 2 Inch Long Up-Cut Bit
www.toolstoday.com/v-13351-51...
RPM: 18,000
Feed Rate: 100ipm
Plunge Rate: 100ipm with 2” long smooth ramp in
Depth Per Pass: 0.25”
Amana Tool 46415-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia x 1 CH x 1/4 SHK 2-1/2 Inch Long Down-Cut Router Bit
www.toolstoday.com/v-13781-46...
RPM: 18,000
Feed Rate: 100ipm
Plunge Rate: 50ipm
Depth Per Pass: 0.25”
Amana Tool 46233-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/16 Dia x 3/16 CH x 1/4 SHK 2 Inch Long Down-Cut Router Bit
www.toolstoday.com/v-14497-46...
RPM: 18,000
Feed Rate: 35ipm
Plunge Rate: 17.5ipm
Depth Per Pass: 0.063”
The piece was finished with some spray lacquer and the screws were installed and it was given to my daughter Caity!
Links
** Subscribe - / toolstoday
** Shop the website - www.toolstoday.com/?...
** Like at Facebook - tinyurl.com/toolstoday-facebook
** Follow on Instagram - / toolstoday
More Links
Amana Tool® www.amanatool.com
STEPCRAFT M.1000 CNC Machine 36" x 48" www.toolstoday.com/stepcraft-...

Наука

Опубликовано:

27 апр 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 44

@tamirerez2547 2 года назад

Her pure innocent HAPPINESS when you gave her the coins is the best part of this excellent video!! 👍❤️😉

@ToolsToday 2 года назад

I'm a bit partial, but that's definitely my favorite part too! I'm glad you enjoyed it, thanks for watching and commenting!

@ToolsToday 2 года назад

The downloadable and customizable CNC plans for this project are available for purchase on our website with item no. ALPHA_BANK if you want to make this project yourself! www.toolstoday.com/cnc-alphabet-piggy-bank-letters.html?

@jonm189 2 года назад

Absolutely loved this, really well done!! I'll be making something like this for my kids once I've finished buiding my CNC! Keep them coming!

@ToolsToday 2 года назад

Thanks for the kind words, glad to hear it!

@blakewilliams3702 2 года назад

Terrific ending to a great video. Thanks.

@ToolsToday 2 года назад

Glad you enjoyed it

@FernandoGomez-oo1tn 2 года назад

Thak you very much for teaching us these very interesting lessons.

@ToolsToday 2 года назад

You are very welcome

@PuhaNation 2 года назад

What a great site, you've got an awesome voice for this.

@abadansanat6803 2 года назад

Nice work n lovely angel be blessed all

@parinshah1114 2 года назад

Nice Project & very very cute daughter ❤️❤️❤️👌👌

@ToolsToday 2 года назад

Thank you so much 😊

@vallesdelcerrato2906 2 года назад

Hay proveedores de esas máquinas cnc, en España? Estaría interesado en la del cargador de herramientas. Un saludo

@user-lx5ef2vy2e 2 года назад

Cool turned out! What type of wood did you use?

@user-qg6xu6rw6f Год назад

Hello beautiful your video wow. I need help because I can't find the letter character you use to make your banks. The letters you use all have a flat part which gives it stability. Of course I have a cnc and I want to make banks for my granddaughters. Thank you so much

@therelaxingwoodshop7495 2 года назад

Much better video

@ToolsToday 2 года назад

Thank you, glad you like it!

@Pedja-J7 2 года назад

Very nice idea

@ToolsToday 2 года назад

Thanks a lot

@Pedja-J7 2 года назад

@@ToolsToday I am new into CNC... I must say I am a big fan of your work. I follow you on Instagram as well, and I am absolutely blown away.... By the way, your working place is a prototype that everyone should have... Everyone who can afford it...😉 Keep on with the great projects....

@davidcochran934 2 года назад

Great video. Did you use a solid piece of oak or did you glue up two pieces to make it 1" thick?

@ToolsToday 2 года назад

Thank you! I glued up two 3/4" boards to make it 1.5" thick.

@timothypropst238 6 месяцев назад

In your directions you stated to make the acrylic piece with an offset of -.005 in. Did you mean -.05 in? I made my first one using your offset and it wouldn’t fit. I actually had my doubts when I read your directions but being new I tried it. -.05 fits like a glove.

@edgargreene2406 5 месяцев назад

your piggy bank from A to Z will it work with my vcare pro. Desktop I have the HD520 shark

@ToolsToday 5 месяцев назад

Yes, the files will work with V-Carve Pro and will have all the toolpaths done for you. They will not work with V-Carve Desktop, but will include the .SVG design files and detailed instructions on how to set up the toolpaths.

@jonwhitehead2102 8 месяцев назад

Good project for sure. What screws did you use? Do you have a link for those?

@ToolsToday 8 месяцев назад

Thank you! All of the hardware used is in the instructions on the plans, but I used #4-3/4” Screws - amzn.to/3u5i1B9

@jonwhitehead2102 8 месяцев назад

Thanks@@ToolsToday ! I ordered it but there was some issues with the order I think. They just emailed me the ZIP file so I didn't really see any instructions. I was able to use the vCarve versions AS IS and am impressed how I only had to review the toolpaths and carry on. I ordered some 1/4" acrylic and will cut that part tomorrow. Thanks for the quick response!!!!

@otbgraphics5565 Год назад

Hey what’s the depth you’re doing name?

@mikefundy1815 2 года назад

What cam software do you use?

@ToolsToday 2 года назад

Vectric, www.toolstoday.com/everything-cnc/cnc-software.html

@GGGG_3333 2 года назад

Are you and Andy Bird related by any chance?

@ToolsToday 2 года назад

We aren't

@neststewart4268 Год назад

I tried and tried to order these files and their system will not let you order downloadable files. I emailed ToolsToday and then called their customer service multiple times. And still have not been able to purchase these files from them. I will look somewhere else with better customer support.

@jameslauro4083 Год назад

Will the file work good With CC ?

@ToolsToday Год назад

It includes an SVG file which are just the vector lines, and will work with Carbide Create, then there are instructions on how to set up all of the toolpaths as well that you will need to set up yourself.

@edgargreene2406 5 месяцев назад

Hi I purchased the Piggy Bank from A to Z and still have not received a download file the money went through the bank can you please help me find these files cause they are nowhere to be found you sent me a email on the 30 saying my files went Delivered. Can you tell me where these files are at?

@ToolsToday 5 месяцев назад

Please contact ttsupport@toolstoday.com and they will be able to assist.

@flynna123 7 месяцев назад

The instructions they send are incorrect. Ruined $50 worth of good hardwood assuming they would be correct. Disappointed.

@ToolsToday 7 месяцев назад

What was incorrect about them?

@flynna123 7 месяцев назад

I will email you, as I want a refund, but instruction number 14, sub F should say select line 7… it says select line 6. Didn’t notice until 2 hours into the cut, and wasted all the time I spent buying the wood, cutting it, jointing it, planing it, gluing it up, cutting it to size, planing it flat, and setting up the cnc.

@robcocco8648 Год назад

You are trying to get people to buy your tools. Why are plans not free? Just look at this video. 600k Subs, 7k views, 286 likes. I think you need to change your game plan.