How To Remove The Rear Hub On Land Rover Discovery 3 / 4 / Range Rover Sport 

Nice positive instructions there Simon you can see Gary listening and learning which is what it’s all about. As for forgetting to undo the ABS sensor, well we’ve all done something similar at some point so no biggie.

The camber adjustment is on the top bolt. You should have marked the washer.

Excellent video as always. And you do make me laugh Simon with some of your comments. Very informative and enjoyable. 👌

Brilliant! Really helpful. I am a Newbie and need to have a crack at this tomorrow! Thanks.

Explain the cutting of the handbrake. Mine is broke, am I able to cut like you did without issue?

Thanks for sharing, kindly where can i see the front one replacment.

You did help me out! I watched a few videos on how to remove the hub including yours. I had a right mare getting the lower bolt from the brake caliper out. Rounded the head, tried everything including the bolt extractor socket, nothing. Then I came.back to your.vid and watched it to the end, and I saw you did the same. I had no idea you could remove it by removing the other two bolts. Life saver !

Does it matter what way round the rear wheel bearing goes back in when replacing it .... many thanks Graeme Vass

Hi 👋 very good but some times is hard to remove.looks easy

Just need some Benny Hill music for this video. I suppose we all had to learn somewhere though..

Hello guys What do you do if the driveshaft is seized on and wont come off? I guess my only option is to grind it off and get a new one?

I find using the double hex sockets with the impact driver rounds the head off, use a black single hex socket, much better! Chris B.

The camber washer is on the top!! You should have marked it first .. BEFORE undoing the nut.

Where is your brake dust shield? Did you guys remove it? If yes, for what reason?

Hey guys very off topic but need some advice. I owe a range rover sport MK1 and have more or less the same sort of rust as this landy. Should I worry or is it okay/normal?

You don't need to lock the disc to undo the hub nut with an impact gun.

Squirt of WD40 on all nuts and bolts before starting makes all the difference.

Are all the driveshaft nuts all the same size for the 2007 RRS to? Oh what size socket is it?

Talk about the blind leading the blind.

The 2 caliber bolts are 12 point 21mm only or you round off head on bolt

Just repaced mine noy dash is lit up suspension don't work any ideas would be grateful