How to Replace Front Drivers CV Axle Front Wheel Drive 01-07 Toyota Highlander

1A Auto: Repair Tips & Secrets Only Mechanics Know

Подписаться 2,4 млн

Просмотров 36 тыс.

50% 1

Buy Now!
New CV Axle Shaft from 1AAuto.com www.1aauto.com/*/i/1AACV00279...
1A Auto shows you how to repair, install, fix, change or replace broken, worn, or vibrating CV axles. This video is applicable to the 01, 02, 03, 04, 05, 06, 07 Toyota Highlander
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/t3r/1AXAA00013
• Pry Bar 1aau.to/tbj/1AXAA00020
• 17mm Socket 1aau.to/tHf/1AXAA00015
• 21mm Socket 1aau.to/tik/1AXAA00043
• 30mm Socket
• Dead Blow Hammer 1aau.to/tdg/1AXAA00091
• 1/2 Inch Breaker Bar 1aau.to/tcI/1AXAA00078
• Ratchet 1aau.to/tB8/1AXAA00016
• Socket Extensions 1aau.to/tHf/1AXAA00015
• Torque Wrench 1aau.to/tgI/1AXAA00044
• Brake Parts Cleaner
• Bungee Cord
• Paper Towels 1aau.to/tfF/1AXSS00035
• Rust Penetrant
• Center Punch 1aau.to/tan/1AXAA00055
• Drain Pan 1aau.to/tb2/1AXAA00320
• Floor Jack 1aau.to/tgs/1AXAA00068
• Hammer 1aau.to/tdg/1AXAA00091
• Jack Stands 1aau.to/tgr/1AXAA00065
• Rubber Mallet 1aau.to/tG/1AXAA00413
For More Info visit us at 1aau.to/h/ag2/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

29 янв 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 35

@1AAuto 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@mountainconstructions 5 лет назад

One of the most professional and careful Mechanics i've seen My pet hate is mechanics that put wheel nuts on with a rattle gun

@1mach28914u1 2 года назад

I taught myself a lesson when I used an impact driver on the wheel nuts. 🤦‍♂️😡 Next time I had a flat I struggled to get the wheel off. 😩

@bigteddybear5962 3 года назад

Heads up! If you have a hybrid with a CVT, you will lose a quart of Toyota ATF WS fluid from your CVT when you take your CV axle out. So either place a pan underneath to collect it, it will pour out. Or, drain your CVT first. Then repace your CV axle. Remembering to fill your CVT fluid after. Another thing to take note of is that the Hybrid CV axle is much beefier than the standard Highlander CV axle. So make sure your auto part store gave you the right one!

@1AAuto 3 года назад

+Big Teddy Bear Thanks for the tip!

@travisirving2009 Год назад

Will that happen on passenger side of hybrid model?

@mvc2177 Год назад

Yup. I was replacing the driver side axle on my 2006 highlander hybrid AWD and autozone gave me the wrong size. Order the right part from rockauto and it’s much beefier. Now my highlander is back to normal 😎👍🏼

@Dougarony Год назад

wow I wish I had a lift, I couldnt see what you used your pry bar on to get the control arm down far enough to put the ball joint bolts in.

@austinferris2598 5 лет назад

I just wanted to say thanks ur videos help me work on all my cars I just did the driver side cv axle and it was so easy

@kidcasco1966 Месяц назад

thank you!

@Objectional_Opinion 3 месяца назад

@7:30 you may lose fluid, but where do you add the fluid?

@ShabirKhan-xx4ve 6 лет назад

nice

@joesmith7144 5 лет назад

At the 7:28 mark, you said when the axle comes out you may lose some fluid. What determines whether you do or not? I just worked on an 05' Highlander and lost about 3 1/2 quarts when I pulled out the drivers side axle. The manual says to add about 3.7 litres or quarts (can't remember which) when you do a fluid and filter change. I lost about 3 1/2 quarts removing the axle, then another almost 4 quarts when I changed the transmission filter. I'm confused...lol.

@luismata9050 4 года назад

So If I did this and had transmission fluid leak. Where do I replace the fluid at? I have a 2007 toyota highlander hybrid and had some leak out and didnt have any fluid handy. Now I need to know how to replace. Dont judge me haha. It's my first time working on my own car.. help!!!

@1mach28914u1 2 года назад

I have a 2009 model; is it the same or similar.

@norbertsims8263 2 года назад

Can the cv axles be replaced one at a time or do they need to be replaced together at one time?

@markflores8268 2 года назад

Is this the same process with the awd?

@jakethekid3344 2 месяца назад

what’s the toque spec for cv axle nuts

@user-ys6pk7tw9h 4 года назад

How many miles this Highlander had? Otherwise great video.

@tonycan462 6 лет назад

Do you need to put any lubricant on the transmission-side of the axle? Thanks in advance!

@1AAuto 6 лет назад

+AC462 You may not have to. If you follow the procedure in the video you should be okay. Hope this helps you out. 1aauto.com

@danielsmith2447 4 года назад

So you have a lift but no impact?

@vtmegrad98 5 лет назад

What was wrong with the old CV axle? The only thing I've known to look for is boots failing. So I was wondering if there are other signs to indicate my wife's Highlander needs new ones that I should be looking for. Because the old boots on that one looked fine in the video.

@1AAuto 5 лет назад

+vtmegrad98 Thanks for watching! You are correct, most of the time the CV axle will fail due to the boot's condition. Once the boot breaks it will leak grease and debris will get into the joints, causing them to break. One sign you can look for is hearing a clicking sound when turning the wheel. That is usually a good indication the the CV joint is failing. 1aauto.com

@derekcrymble9085 3 года назад

Why was there no damper on the new axel?

@dmitritestacough8551 Год назад

There is a special tool that is used to lift the dimple out from the axle spindle nut. You risk damaging the axle threads by just using a screwdriver or punch.