How to Replace Power Steering Pump 4.0L 01-11 Ford Ranger

1A Auto: Repair Tips & Secrets Only Mechanics Know

Подписаться 2,4 млн

Просмотров 134 тыс.

50% 1

Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ib/1AEWP00089
In this video, 1A Auto shows you how to install, fix, change, replace a power steering pump for the 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11 Ford Ranger
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oN2/1AXAA00013
• Phillips Head Screwdriver 1aau.to/oN2/1AXAA00013
• 18mm Wrench
• 10mm Socket 1aau.to/oBG/1AXAA00017
• 7mm Socket 1aau.to/oBG/1AXAA00017
• Adjustable Wrench
• Needle nose pliers 1aau.to/of8/1AXAA00051
• Needle nose pliers 1aau.to/of8/1AXAA00052
• 3/8 Inch Drive Ratchet 1aau.to/oGw/1AXAA00015
• Socket Extensions 1aau.to/oGw/1AXAA00015
• Rust Penetrant
• Transmission Fluid
• Drain Pan 1aau.to/odC/1AXAA00320
• Floor Jack 1aau.to/okt/1AXAA00068
• Funnel 1aau.to/obn/1AXAA00310
• Hammer 1aau.to/ogf/1AXAA00091
• Jack Stands 1aau.to/okt/1AXAA00065
For More Info visit us at 1aau.to/h/asW/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

14 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@1AAuto 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@davewilcox9133 6 лет назад

I just completed this on a 1999 Ford Ranger and the only suggestion I'd make is to remove the lower end (connected to the cooler) of the low pressure hose as it is more accessible than the end connected to the pump.

@MiaMovesMe 4 года назад

Also works on a 2000 SOHC V6 Explorer 😎 Thanks for the great vid!

@1AAuto 4 года назад

+Mia Moves Me // Dance Fitness Thanks for checking us out! 1AAuto.com

@Trevorl-fo7vr 7 лет назад

I have a 4.0 SOHC 02 Explorer. The power steering pump assembly is the exact same. I just changed it out. While I must say there's way more complicated jobs this wasn't a day at the beach. Taking the high pressure flare nut off was an adventure. Used penetrating oil, stubby wrench, flare wrench and took quite some time to get it loose. Finding 18 mm wrenches in general is tough to find let alone a stubby lol. Getting the high pressure line back in to the new pump was also a process. I had a mechanic friend come give it a try and it was still not budging. After some persistence finally got it going. With the exception of the. High pressure line the process was not bad at all. But be advised know what you're doing before you go and start this. It's very easy to round off a stuck flare nut.

@donaldfafard 6 лет назад

did you have a white plastic o ring with your replacement pump?

@danielmoore6211 7 лет назад

This video is SO helpful! Exactly what I was looking for. Will be buying parts from you guys

@donaldfafard 6 лет назад

did you have a white plastic o ring with your replacement pump?

@jiwbink Год назад

I LOOKED AND LOOKED,COULD NOT FIND THAT NYLON WASHER... IT WAS ALREADY ON LINE! THERE WAS A SMALL CAP AND A SMALL O RING FOR THE LOW END.

@MAGWolf 5 лет назад

love how my A/C clutch is in the way.

@GWRanch 4 месяца назад

This is the first DIY video from A-1 Auto that did not work for me. I also have a 2001 Ranger 4.0L. Where I have to digress is when the repairman uses the open ended wrench to take off the hose line. It was impossible on my truck. Instead I recommend unbolting the fluid reservoir, and then unclamp the hose which is much more accessible than the screwed in line. Then with the reservoir pulled forward, you can easily pull the hose from where it was clamped to the steering pump housing. Then right behind where the hose was, unbolt the the bracket securing the hose below the pump. Then remove the pump and place it on top of the pump housing to easily remove the fluid line. Everything else is the same.

@tiekneebubbles 7 лет назад

would you guys be making a video how to replace a power steering pump on a 2005 Ford Taurus 3.0 liter engine U engine code? I tried seeing if there was anything similar to the Ford Taurus but I couldn't find it.

@lorenzoalmanza3397 7 лет назад

Great job 👍👍

@1AAuto 7 лет назад

+Lorenzo Almanza Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/engine-water-pump/i/1aewp00089/?RU-vid&CTA+Comment&Kv8rjic0L6I

@kevinmetcalf6371 2 года назад

Thank you so much.

@jontwil 7 лет назад

just did this on my 05 explorer. was not to bad of a job. no way i was getting a full size 18mm wrench in there. had to get a stubby. one thing that was left out was putting the new teflon ring on the pressure fitting.

@donaldfafard 6 лет назад

that was my question(s) above, the white plastic o ring. where did that go? into the threads for the high pressure line into the pump?

@686Mytube 6 лет назад

Thank you so much ,... I had a leak where I couldn't see ... removing the pump made it easier

@1AAuto 6 лет назад

+Dennis Sr Thomas Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

@donaldfafard 6 лет назад

THE LINKS YOU GUYS HAVE IN THIS DESCRIPTION AND COMMENTS SECTION IS FOR A WATER PUMP, NOT A POWER STEERING PUMP.

@hipolitozamorano2214 Год назад

What if the new pump has a nut where the pressure line connects what do I do the line won't enter the nut I done returned two new pumps for that reason do I take off the nut or do I replace the line with a different line?

@tomgaffy9434 6 лет назад

Does the gasket on the Pwr Steering Flare nut have to be replaced when replacing the pump? Should the Pwr Steering reservoir be drained to complete the service?

@tamahthompson1923 7 месяцев назад

If they have a problem with rebuild steering wheel motor pump goodness find a way of getting a different part that's good 👍. for Mast Service Center in Etna Green Indiana. TAMAH Thompson they're working on my 1998 Ford ranger truck.

@jiwbink Год назад

I have the pump end of the hose going into the P.S.PUMP,THE NUT IS AS TIGHT AS IT CAN GO,HOWEVER I CAN MOVE THE HOSE IN PLACE. IS THIS GOING TO BE AN ISSUE FOR LEAKING?

@Acsoccer321 6 лет назад

Have an 04 ranger with a 4.0 and when the engine runs it makes the same chirp yours did while it idles. Any ideas? I know it’s somthing with the ps pump bearing

@1AAuto 6 лет назад

+Acsoccer321 You may also want to inspect the engine idler pulley to see if it is making noise. Hope this helps you out. 1aauto.com

@donaldfafard 6 лет назад

definitely the idler pully, change the whole unit not just the pully. change the other pully while you are at it too

@__Hyde__ 5 лет назад

Would this be the same process for a 00 4.0 v6?

@snowysysadmin59 4 года назад

its all the same. regardless of year. if it has a 4.0, this method and process will work.

@profitsoverpeople7178 3 года назад

I already replaced the Idler Pulley the Serpentine Belt and now I'm going to replace the Power Steering and Tensioner what else could cause the squueking if after replacing everything it doesn't stop

@thatoneshortboi 3 года назад

Could be slicked pulleys. They coulda have oils on them that cause the belt to squeal. It could even be condensation on the belt that builds up.

@flyingcat2054 4 года назад

My 2003 ranger is hard to steer, and giving me shoulder problems, now hand problems(gripping). Two mechanics said they thought it’s normal for a truck. My girlfriend borrowed an older ranger and said it was ok for her, and she is not stronger than I. I drove my neighbors f150 and it was easy peasy steering! Ok, electronic. So, are rangers hard to steer normally? I don’t want to do tight turns or park it. We don’t see leaks anywhere, sea foam trans tune didn’t help, nor did new fluid. Would changing the pump be viable help?

@adanflores4523 4 года назад

Most likely my 07 ranger is easy to turn, right now i have a leak which is why im here but I've never had to put extra effort, i would also check your steering rack there could be a problem there

@joeysanchez5926 4 года назад

It could be as weak pump or your rack and pinion. Is it harder to turn to a certain side???

@rigged5984 Год назад

Aren’t there washers or O rings on the line?

@tylergollihugh9272 5 лет назад

what was the sound at the end of the video?

@1AAuto 5 лет назад

+Tyler Gollihugh We are unsure what that other noise was, I am sure we looked into that afterwards if we did not know by the time of the video being made!

@cmerc8848 3 года назад

@@1AAuto Did you guys figure out what the noise was and if the noise went away after?

@ram43x80 2 года назад

Was a little confusing, went from changing power steering pump to lifting truck, maybe its all the same procedure..my bad lol

@donaldfafard 6 лет назад

WHERE DID I MISS THE BLEEDING PART?!?

@CyndyNeg 6 лет назад

I had mechanic do this but 2000 ranger is much more quieter now but still heara non motor sound coming from underneath esp when turning right : /

@Turner.1 Год назад

Mine is different in the 2004,

@cuttheloop Год назад

01-11 You sure about that? This looks nothing like my 05 Ranger Edge

@ram43x80 2 года назад

Its a 2000 ranger 4.0

@tamahthompson1923 7 месяцев назад

Mast Service center needs some information on working on the steering wheel pump. They have hose's on they're having a problem yet with my 1998 Ford ranger truck December 5,2023.Hope I have luck soon to be able to get my truck. TAMAH THOMPSON Etna Green Indiana.

@ram43x80 2 года назад

There r no bolts on this pulley

@johne9505 10 месяцев назад

Ford

@Z-Ack 7 лет назад

I dunno for sure but I don't think your dude got all the air outta the system... also your videos are very professional and informative but why leave off the most important part, the torque specs..?? Those are hard as hell for a person to find unless you have a membership to certain places... "I was following along great then I broke off the bolt". Or get he-man hollerin at your company talking like "you sold defective pulley, it bent over when tightening bolt.. lol.. just saying, theory is only that till the apple floats away....