John Deere E100 First Oil Change and Secret Upgrade?!

Подписаться 1,3 тыс.

Просмотров 189 тыс.

50% 1

Well, its now overdue for its first service (dump and fill) and I should actually grease it again one of these days too. Yes, I have a family member that works for Case IH. If Case still sold lawn tractors I would have bought one. That being said I really like the look of John Deere's. Can't beat green and yellow! Also I apologize for stooping to click-bait... but I definitely appreciate your view!
Every comment helps the channel, so I certainly appreciate the feedback good or bad. That being said, a fram oil filter isn't going to kill this lawnmower engine. Its essentially just a lawnmower that you can ride that has John Deere stickers on it. You will never get all the old engine oil out during an oil change unless you are completely flushing the entire system with new oil. When I was researching different ride on lawn mower models I called my local John Deere dealership and they didn't seem too overly thrilled that John Deere even offers these small mowers and they just recommended I go to a big box store and buy it there. That was pretty surprising for me, but it gave me the impression they didn't really care to have time for small lawn "tractors". This video is meant to be half instructional and the rest a big joke for entertainment. Of course I had to google the exact oil spec, and I would never finish the oil change without the correct oil level. I'm using the correct weight and type of oil, this mower has had 3 services since filming this video and its running just fine. There are many brands of oil and oil filters and John Deere is not the only option out there. Going slightly over the service interval is not recommended but its also not going to kill the engine if it happens once in a while. Modern oils don't break down as soon as they used to, and sometimes life gets real busy on a guy. Its easy to get polarized over a brand and loyalty to a brand, but just remember folks, its just a fancy lawnmower, and its just RU-vid, its just entertainment. I do try to read and respond to every comment I get. If you want to teach me something i'm all ears, just keep it positive :) A service on a tiny machine like this is simple, its not an aircraft and it doesn't need to be overcomplicated.

Авто/Мото

Опубликовано:

31 мар 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 336

@maunalapier4939 2 года назад

Mercy!!! I’m a 71 old farm girl and don’t know how I found you. Seriously you need to put a warning ⛔️ for us older gals because we need to be prepared for all of the HYSTERICAL LAUGHING You made my day week maybe month I’m subscribed for all your videos ⭐️🌟✨💫💥 We all need you💖 in these crazy times!!!

@Darren1767 2 года назад

Haha glad you get my humour :)

@matmanpromotions6457 2 года назад

I loved the way you shook the old filter a few times to get the old oil out. then dropped it in the bucket . ha.

@Darren1767 2 года назад

Whoops! Sadly I’m more dropped oil filters than I’d like lately haha

@plamenplamenof3567 10 месяцев назад

Lightweight is good and what did I use it for it’s a lawnmower ru-vid.comUgkxTPN04aT-Qdjr_KS3ql7ng8wnU3wwsCqk also recommend Yes it is lightweight so hence not as robust as our old one. But if you take care it does the job really well.

@MudgunnerMechanix 15 дней назад

I knew I sensed the military humour haha. Good video “Jimmy”. Tech tip: loosen the dipstick after you open the oil drain. Flows much faster

@Darren1767 14 дней назад

Heck ya brother. Have a good day!

@EYALAVRAHAMI Год назад

Well, that sounds like a great idea! Buying the cheapest oil and filter saves you 25$ a year and you can be sure that the cheap filter actually filters and the cheapest oil is lubricating exactly the way it should. A risk worth taking when a full John Deere OEM service kit cost 49$ and a full OEM Brigs kit cost 40$. Fine risk management young man!

@Darren1767 Год назад

Thanks :)

@jklein17 Год назад

A complete oil change kit for my E140 from John Deere is around $40. It includes two quarts of oil, two spark plugs (pre gapped), oil filter, air filter and gas filter. Seems like a good cheap deal to me.

@Darren1767 Год назад

Now that is a heck of a deal! Sign me up. Is that in Canada dollars or USA?

@revolution51 11 месяцев назад

@@Darren1767 Well......which is it.....? 3 months,no answer.......gee, ya think he just wants more clicks.?.......

@ianswift3521 10 месяцев назад

not everyone has youtube reply notifications on, and why would a random youtuber want "more clicks". he doesn't get any money from claiming he gets a cheap deal on oil changes bro. lay off the stock in tin foil hats. @@revolution51

@nperson 8 месяцев назад

Problem is that the spark plugs do not need to be changed every oil change and you're wasting money by buying a oil change kit. It costs less than $18 for a new filter and quality oil. Spark plugs last many years. I have not put new plugs in my D130 since I bought it 10 years ago. Starts right up and runs fine. My previous lawn tractor lasted 17 years with the original plugs. These newer ignition systems are much better than in the past.

@markpaulin884 24 дня назад

Wow. A yearly maintenance service here is $300 to $400.

@fortyfour6626 Год назад

I made a magnet sticker for mine. I invented a generic GPS tracking company logo and put “warning-GPS tracked 24/7” anti theft systems. So far it’s worked 100% flawlessly as my JD hasn’t been stolen even once.

@BluecollarBackcountry Год назад

I have a 7 year old D105 and have changed the oil many times so I'm not sure why I watched this. I'm glad I did! This was hilarious. Heck....I think I'll go change it again. Thanks ✌

@Darren1767 Год назад

I do the same thing when I’m bored and rewatch stuff just for fun.

@robertmirabilio5940 10 месяцев назад

This is definitely for a novice who has no experience in maintaining his equipment. I was bored so I watched it

@bernardnoel1514 Год назад

Your trying to save a few dollars buying a cheep oil and filter, engines are very expensive good oil filters are cheap in comparison.

@wvmountaineer69 3 года назад

Good video! I don't think most people appreciate your since of humor, but I laughed throughout the video!

@Darren1767 3 года назад

I do ok with the folks around me or at work haha. I posted this in a John Deere “garden tractor” group on Facebook. Whole lotta angry folks in there but it was still entertaining. I think John Deere’s are cool but garden tractor or lawn mower it’s still just a fancy lawn mower. People take themselves too seriously 😂🤙🏼

@meals24u 2 года назад

@@Darren1767 man after my own heart with that sarcasm.. love it..

@r.williamcomm7693 Год назад

Anyone feeling the need to express recreational outrage would’ve wasted the that 9:43 on something far less valuable. The Fram oil filter is much more affordable than the $15 John Deere filter. Also wondering if anyone has an opinion about Amazon kits for these mowers that comes with an oil filter, air filter, fuel filter & spark plugs. For the v-twin 22hp LA 135 it’s $16 on Amazon (obviously Chinese parts) vs $60-$70 for JD parts at Home Depot.

@yatie2000 Год назад

Brilliant!!! Lol

@warrenbeck3922 Год назад

@@Darren1767 l

@richards5843 Год назад

I took off my ez oil filter adapter and install a kit from John Deere so I can use a regular oil ilter. Those ez off oil filters are $47.00 now up from $39.00.

@Darren1767 Год назад

Nice, I would have done the same thing!

@jameslomenzo1139 9 месяцев назад

$55 here in Middle Tennessee, I wouldn't have that piece of crap.

@warrenvalentino5763 2 года назад

Great video! i buy my oil filters online and two at a time (cheaper price and free shipping). i always keep a extra quart of oil on hand just in case. :)

@offplanetevent Год назад

Rap flexible magnet strips around the oil filter for added protection. It catches all the reality big metal shavings that can cut through the filter medium making the filter useless

@christophersuleske1905 Год назад

Most sarcasm per minute ever in an instructional RU-vid video. Love it!

@tonytsquared5576 Год назад

Suggestion: use a sharpie to record the date and hours on your oil filter. I am on my second JD mower. The first one was 15 years old when I bought it at a garage sale and I used it for 9 years where I left it with the house when I sold it. JD #2 is now a 19 year old unit that I bought as a end of summer season repo that had 40 hours on it. Plugs every other year and new air filter, oil filter, and oil every spring. I don't put enough hours on it in a years time for the recommended maintenance cycle. I have two sets of blades and change out the sharpened and balanced blades at the oil change and lube. Replace the belt with a JD brand belt or you will get to do it again soon if you use an aftermarket belt.

@Darren1767 Год назад

Thanks for the tips there. I’ll definitely replace the belt with a jd belt like you said. I still have to sharpen or replace my blades. At my last property I was a little hard on this machine and I did some brush hogging with it so I wouldn’t be surprised if the blades are a little chipped up. I have just been ignoring the hour meter and changing the oil at the beginning of the season. It only takes me around half an hour to mow almost an acre of lawn so I don’t get a ton of hours. The summers here get very dry and you don’t have to mow for about 2 months sometimes.

@stevendiaz5731 2 года назад

Hey, really like the rooster in the background. I’m used to roosters waking me up in the morning.

@mrc4910 2 года назад

Interesting and very amusing! Love all your quips - I'm sure we would be very good friends.

@MEEMOSS77 2 года назад

Funnels are optional…you wanna do this on a really windy day. That’s one of the best lines I’ve heard in a while. It’s like McDonald’s…….I’m lovin’ it But seriously nice video my s100 get delivered in about 10 days can’t wait

@Darren1767 2 года назад

Haha thanks man, I hope you enjoy it! I took mine out for a pre-spring drive to the back of the property and had a coffee and watched the dogs run around. I kind of abuse mine a bit and brush hog small diameter stuff with it. Maybe one day I’ll treat it to new blades but to me it’s just a tool. It gets the job done around here :)

@Starman2440 2 года назад

Well done! A Wal Mart Super Tech ST3614 oil filter fits & works---it is a bit taller, but easier to remove with a filter cap wrench--cost was $3.00.

@The2012waiting 2 года назад

Fram 3614 in any 3 tiers also fit, will need little bit extra oil

@mikiwessel262 7 месяцев назад

You beat me to it.

@miragexl007 2 года назад

Just bought S130, coming this week. Going to miss my old 1974 Cub Cadet 169. No oil filter, Splash Lube. Still runs great, just tired of the little things and the rough ride. But what a beast. Never change transmission oil either. But I think this lightweight easier riding always starting, safer for my kids piece of plastic crap will do for the next few years. Lol. I'll probably stick with just the John Deere filter and oil.. And pay the extra what ten bucks once a year. So no excuse when and if this thing has issues.

@miragexl007 2 года назад

And yes, I will be getting rid of that piece of crap quick oil system that's $40 just for the filter and a third bottle or something of oil

@Darren1767 2 года назад

Mine runs fine on Canadian tire oil and fram. If anything I think the plastic axle housing is junk but you should be in the clear with a 130. Good buy. I’m still happy with mine otherwise!! Mows the lawn and it’s comfortable enough.

@dannyhager9767 Год назад

Love this guy!! You have a bright future in deadpan comedy!! Great video!! The rooster approves as well!

@Darren1767 Год назад

Haha thanks eh!

@TroyCook-vd6qu 7 дней назад

A rider usually takes 1.5 quart of oil. But double check your owners manual or JD website to be sure. Some models vary.

@BornToFly4031 10 месяцев назад

Dude, you are the king of sarcasm. Good job.

@Darren1767 10 месяцев назад

I musta been having a good day. Thought it would be decent to actually show people the right way to do it with a bit of humour.

@JohnFarnham-dn4fo 10 месяцев назад

Works GREAT! I am incredibly happy with this purchase.

@Darren1767 10 месяцев назад

Yahoo!

@miragexl007 2 года назад

hmm. planning on s130 come spring...and glad to find out about that Quick Oil filter piece of crap...and the swap out kit.

@Darren1767 2 года назад

YES!!! I would totally put that kit on it. Luckily the base model came with the normal oil change setup… if I did it again i’d probably go 120 or above just for the better transmission. But all in all mine is good enough

@user-ut9nb8rw1o 16 дней назад

I have a E100 and it takes a little over 1 quart. I usually dump a full quart and then tweek it a bit.

@faxmen09 2 года назад

I appreciate the Canadian (?) humor. You might give the McKenzie Bros a run for their money. And the Fram filter is fine. Because it's such a low volume sales filter, it's made by someone else for Fram. Even uses metal end caps, not the Fram fiber type. Thanks for vid and the laughs.

@Darren1767 2 года назад

Oh man I’ve been roasted left and right and called all kinds of ridiculous names for this video… just having a little fun haha! Glad you enjoyed. After all it’s just a lawn mower ;)

@dand3975 Год назад

Would been great if "HoseHead," Bob and Doug's dog would have changed the oil.

@faxmen09 Год назад

@@dand3975 Give him a doughnut. Jelly he likes jelly. Jelly doughnut comin.

@chreschres512 Год назад

I bursted out laughing when you said to pour it on windy day. That cracked me!

@Darren1767 Год назад

Obviously o would never recommend pouring oil on your driveway ;)

@timdolan4840 Год назад

Great sense of humor!!!

@OldSchool1947 Месяц назад

Informative and hilarious!

@rutniktrainer День назад

You can use a long funnel to get the oil into your drain pan.

@DanielMeyer-ls5ph 4 месяца назад

International Harvester used to make the Cub Cadet. No more, My John Deere SB14 self propelled mower is 28 years old and doesn’t burn oil. John Deere filters and Amsoil

@gmdeutsch Год назад

Good job on the instructions… funny too!

@andyandy4459 2 года назад

Can't believe I watched the end to see what his high performance tip is! 🙄🤪😅

@Darren1767 2 года назад

Same here lol thanks for the support ;)

@harryhoover915 Год назад

I use clean oil to lubricate my filter gasket.

@Darren1767 Год назад

You can if you want to. It really doesn’t matter and just adds another step for you. All you are doing is lubricating the o ring. You shouldn’t be getting it soaked in oil. You will never get all the old engine oil out of any engine when you do an oil change. There will always be old oil left in the engine to a certain extent. People definitely have their opinions on using new oil only to lubricate the o ring but I have literally done thousands of oil changes and I can’t see how it makes a difference. Unless your oil is so heavily contaminated with metal flakes or fuel i can’t see it mattering at all.

@JoshsGreenGarage 2 года назад

Very much enjoyed the humor haha!

@jeffhodgson588 Год назад

Love the roster in tha back ground i think he was laughing too😂

@Darren1767 Год назад

Hopefully ;)

@kodak_jack 2 месяца назад

Find a scrap piece of sheet metal and make yourself a guard that will guide the oil away from the frame when changing the filter.

@Darren1767 2 месяца назад

When I filmed this video I was in such a rush, that is a smart idea. I have a lot more free time now compared to a few years ago :)

@fortyfour6626 Год назад

Great video! We are all different in how we go about maintaining. I paid $2100 for my booger green tractor… I don’t mind spending an extra $3.20 on the designed filter. Nothing wrong with Fram but I trust JDs isn’t going to flake apart inside due to excessive heat. Also, every single filter on a new tractor is over tightened to stupid levels. I used a C clamp busting a hole it it to get the piece of shit off. JD has no good reason for that over tighten… I think they figure if one in a 100 give up and call the dealer, it’s basically an easy way to get some $100 an hour labor or some shit. Another thing I found is just buy the green plastic watering can at the dollar tree and use that as a pan… the height is perfect and the spout just by random chance rests snug on the port. Then after you empty the new oil, pour the oil in the water can in the empty jugs and throw them in the neighbors garbage. Another thing I do is stand on the side of the tractor when the oil is done flowing to get that last bit out. …. Then pour a little clean oil in to rinse down any metal fragments that are heavy at the bottom.

@Darren1767 Год назад

Funny eh. I guess a hot oil flush would work well. Again though, mower is 3 years old now and it’s running fine. I don’t think I’ve ever noticed shavings in oil. Oil always comes out looking decent. There are a few filter brands I would never use but I worked on cars for a living for around 4 years and I changed a lot of oil when I was doing that. I think fram is fine. I used to use the factory brand filters on my vehicles, I used fram, napa etc. never noticed a difference. The only time I especially go for the factory brand now is on our Toyota hybrid. I’m not gonna cheap out on a $46,000 SUV.

@fortyfour6626 Год назад

@@Darren1767 I’m with you there. I went way too long to my first change… I think I’m at 70 hours…. The oil was really clean. It was still hard to see on the dip stick. I owned a crapsman before the JD and it’s been night and day. The JD is hands down built so much better. I’m a bit obsessive and clean the deck and everything real well after each cut ( being in FL, the grass will rot a deck so fast it’s crazy) . I just hit all the grease points and got new blades for the hell of it. I swapped the headlight bulbs out for multicolored LED for no good reason too ( grandson thinks it’s cool as hell… when on the green setting it looks fun). The only issue I’ve had was because I let the idiot neighbor use it. That s100 just isn’t made for long heavy grass. I heard him stalling it out but just cringed and let him finish his lawn. Next time I went to use it the belt snapped. I know he stretched that shit. Oh, and one of the deck pins and washer popped off and I was running it for a good 50 yards before I looked back and noticed the deck was digging into the ground on the right side. It looked like DJ Jazzy Jeff’s hair all slanted. I was surprised I didn’t hear it even notice right away the deck was dragging on one side.

@QBRX 4 месяца назад

Hey, you do things just like me, except I have 35 hours on mine and haven't changed the oil. I guess I'll do that this spring.

@imogenbrown6290 2 года назад

I've always said u Canadians are just Aussies with a funny accent. Great job mate and thanks for the laughs. (But next time we wanna see the rowdy Roosta in there somewhere )

@Darren1767 2 года назад

Haha that’s an honour that I accept ;)

@Darren1767 2 года назад

I do have a whole pile of other videos and some with chickens, but they don’t seem to be as popular :)

@xballplayer4556 2 года назад

I suggest you cross check the number on the factory filter for exact number and filter from Fran and see which fram is correct filter

@Darren1767 2 года назад

It is the correct Fram. Engine runs fine. I just like to double check the threads and gasket before I put anything on. There’s always room for mistakes at the factory. I’m also looking for rust if it’s been on the shelf for too long etc.

@ericgautreaux1752 Год назад

Love the tip at the end.😄

@Darren1767 Год назад

Congrats, you are person #1 to like this video haha

@imarokr2063 Год назад

The rooster was the best part of the video

@jalonstraker6104 3 года назад

😂😂😂😂 I could watch this everyday and laugh but you did do everything correctly 👍🏾

@Darren1767 Год назад

Haha thanks. I dunno if it was dry humour? Canadian satire? I always double check parts compatability and oil weight/type etc. ya I totally cheaped out and went with Canadian tires house brand oil and a dirty orange filter but that lawn mower runs like a top and I would never purposely harm my equipment or vehicles. Too costly haha

@robertryan2222 Год назад

Don't quit your day job dude!!!

@Darren1767 Год назад

Thanks, I think it would be foolish to leave a job with two pensions as well ;)

@Arivmario Год назад

Great video and awesome sarcasm 👍👍👍

@ms.p5311 2 года назад

Thx for the humor!! I just purchased a 2022 S100. Going to fire it up tomorrow. Also, loved the crowing 🐓. Another thing, have you had any issues with the deck belt flying off?

@Darren1767 2 года назад

Hey, Thanks! I just put out a “2 year later review” kinda video. No, I haven’t had any issues with that. One time, maybe twice I engaged the PTO and it didn’t go, but I just cycled it again and it was fine. It’s been running fine, no transmission issues so far. I just really need to get the blades off for a sharpening due to me being dumb and hitting a couple rocks and bush hogging little trees/very small land clearing of bushes etc. that it’s not made for.

@davehoward2791 Год назад

I have a 2021 S100 and the deck belt broke on it at about 3 hours. Bought a new one and it broke at 7 hrs. Hauled it into the dealer and they found it had a seized idler pulley. Replaced it under warranty along with a new belt and it’s been running fine ever since. Think I have about 20 hrs on it now, we love it.

@ciphercode2298 Год назад

When engaging and disengaging the pto,make sure you're around half throttle. Doing it at full throttle is hard on the belt and pulleys. It can cause the belt to jump off or even break

@jameslomenzo1139 9 месяцев назад

@ciphercode2298 that is correct. I don't know why so many people over look that.

@TammyClair Год назад

OMG, I want to do this, but I'm not good at reading sarcasm, sooo... Thanks, and I'll just to be safe check another video. I've never done this and too nervous to get the jokes. I'll return and enjoy the jokes. Sad enough I realized you were joking only when you said, do the oil change on a windy day.... LoL, then I knew.. But, I insist I'll learn to service my mower myself. Thank you.

@Darren1767 Год назад

Whatever works for you :)

@Rat-Builder Год назад

I am a retired heavy equipment mechanic, and I want to point out a couple things. The first one is using that Fram oil filter. Those are the most cheaply made oil filters. I personally use JD filters. I also use Amsoil oil. I use it in all of my vehicles. Wix makes good filters. Do some research about oil filters. You will be amazed. I buy all of my parts from the JD dealer. After-market parts are questionable at times. The JD stuff is better in my opinion. For years I was a field mechanic for Caterpillar, and that is where I learned about the price that the equipment owner sometimes pays when they use cheap parts. The engine oil is the single most important part of preventive maintenance. My JD lawn tractor also came with that goofy "quick change" oil filter set up. I changed that out at the first oil change. Changing out that expensive oil filter, but leaving 2/3 of the engine oil in the engine is dumb by my opinion. I also did not like the drain pipe cap that came with the JD kit. It was not positive enough for me. I just used a piece of pipe and a pipe cap. If that little plastic cap jiggles off, the engine will be toast in a very short time.

@kurtcameron723 Год назад

That is spot on..The basic Fram filter is junk.

@jdsnapp 10 месяцев назад

Amsoil is top notch.

@briandillard8125 Год назад

Case IH sticker was the best part. FARMALL for life.

@Darren1767 Год назад

Hasn’t let me down yet

@michaelwhiting668 Год назад

Great channel.

@Darren1767 Год назад

Thanks brother! I sometimes feel like it’s all over the place, and I don’t quite have a proper focus for it yet but I appreciate your feedback. I don’t plan on ever being a “proper” RU-vidr with this. I have a normal job and too much going on to put the effort in to make good $$ doing this. 138 more subscribers till I may be able to monetize though

@BE242_CH2 Год назад

00:41 I had to eat a whole tub to do this 🤣👆

@Darren1767 Год назад

Took one for the team there I suppose… ;)

@prostreetgsxr 8 месяцев назад

Using dirty oil to lubricate the O-ring on your new oil filter. I have been doing it wrong. I always use clean oil.

@Darren1767 7 месяцев назад

It really doesn’t matter. The dirty oil was just in your engine, the o ring stops the engine oil from leaking out, if there was any contamination it would be microscopic. Pretty much every car dealership or mechanic shop will do it the way I did it. You never get all the engine oil out of a motor unless you drop the pan and flush the entire motor.

@prostreetgsxr 7 месяцев назад

Using dirty oil on a clean filter is just dumb. Real mechanics do not do this. Trust me lol

@pyroman49wedd86 2 года назад

Same way with the grease you better keep that receipt to prove you have been greasing bearings. If it’s under warranty

@Darren1767 2 года назад

I don’t do that at all. Can’t be bothered

@silverstuff54 2 года назад

I desperately need one of the stickers you showed us at the end of the video. Where can I get one?

@Darren1767 2 года назад

Amazon hahaha

@VPOL2112 2 года назад

Need to change my oil but it's not windy enough. Maybe tomorrow?

@Darren1767 2 года назад

Hahahah that is key

@JohnDoe-ef3wo Год назад

John Deere will put their name on anything nowadays!

@onodacops 2 года назад

Now if I can get that darn E100 belt to stay on ! Any tips for that ? :)

@Darren1767 2 года назад

Someone else just asked me about this haha! I wish I knew, but go on RU-vid and check out Steve’s small engine saloon. The guy drinks wayyy too much but he is a wisdom carrier! He’s saved my butt a lot.

@joeblow5154 2 года назад

In my experience from the last 30+ years usually one of the deck pulleys isn't sitting horizontal or parallel to the deck. I've had the idler pulley bracket bend and derails the belt every time.

@denvertolle235 2 года назад

I'm having problems with my e 100 belt also I noticed the idler pulley was bent so I straighten it didn't help can't figure out what I'm doing wrong might go to RU-vid Steve's small engine repair thank guys for the info

@ms.p5311 2 года назад

Saw a guy on RU-vid who put a 1inch smaller belt on, it solved the issue.

@ciphercode2298 Год назад

When engaging and disengaging your pto do it at half throttle,that often helps

@rayriley3366 2 года назад

I wasn’t sure why he said it was important to wear gloves “Because you never know what you will track in with your BOOTS?😜

@Darren1767 2 года назад

I was mindlessly rambling and attempting humour but ya man. 3 dogs, cows, goats, etc. you never know what’s on them there floor boards 🤦🏻‍♂️

@manandatractor Год назад

Spends a minute carefully emptying the oil out the old filter then throws the oil filter into the oil bucket 😂

@Darren1767 Год назад

I done gone and goofed up lol! Darn butterfingers. Every comment helps, I know my content is barely half decent at best but I need 100 more subscribers to monetize ;) even if you hate my channel everything helps. Have a great day!

@runit5772 Год назад

Typical ordinary guy self taught.. if it blows up, might need a new battery rite!! Bwahaha🤣😂😆😁 I'd crack open a case of beers and help him fix anything any day..🤣🤣🤣🥳

@jesseyb87 2 года назад

😂😂 great video man

@ourv9603 Год назад

So to keep up with John Deere, Case & IH had to partner up to come up with 1 whole whit? !

@Darren1767 Год назад

I like both brands, it would have been really cool to buy a case lawn tractor but I guess they stopped making them years ago. On a serious note though, this lawn mower is still running great and does it’s job well for the entry model. It’s comfortable too.

@Dstromb232 2 года назад

My filter was on so tight that I tore it off the base of the filter. I called John Deere and they said they put it on tight to keep from being stolen or loosen up at the store.

@Darren1767 2 года назад

Crazy eh! The Lowe’s store I bought mine from said they have to remove batteries etc for the same reason on their display models

@Dstromb232 2 года назад

@@Darren1767 Thanks

@immoegreen200 11 месяцев назад

It sure worked!!!😂😂😂

@stevebolaris1076 Год назад

FYI - you can add a piece of plastic tubing to the drain plug - I use a piece of 1/2 inch drip irrigation tubing to get the oil from the engine to your drain pan or gallon jug for recycling. Also a few paper towels wadded up under the fuel filter on the frame will keep things a bit cleaner. Placing the used filter into a gallon zip lock plastic bag is a great way to keep it all neat for the recycling. My grease gun wouldn't fit though; so that is a problem for another day.

@Darren1767 Год назад

Ya that’s smart! I used to keep different size tubing in my tool box for hard to reach oil fill necks on motor homes or fancy cars where you can’t drop oil etc. works good for Bleeding brakes too. I am reeeeaaallly not wanting to take the deck off and sharpen the blades. I assume I Probly don’t need to take the deck off but either way I need to build some ramps for this thing or figure out where some decent lifting points are to jack it up. I just don’t like the “plastic” axles and I haven’t had the right amount of time to do that yet

@marywilson2128 2 года назад

How do I put the trans belt back on it slipped off it's brand new

@Darren1767 2 года назад

Go check out “Steve’s small engine saloon” on RU-vid. Check his channel out he has a bunch of John Deere riding lawn mower videos and I remember one about grease fittings on the shafts that hold the belts. That may help you. Other than that I’m not sure. I haven’t touched the deck other than cleaning it. Good luck to ya though!!

@patpeacock8150 Год назад

Would been a lits easier just use your belt to break the oil filter lose if you can't do it by hand

@Darren1767 Год назад

I used to be a mechanic, I like this style oil filter wrench. I put it on backwards like a noob at first though which did not help me haha! It’s been years, I don’t wrench much anymore

@joeybutcher6571 Год назад

Cross thread works better than lock tight

@Darren1767 Год назад

If you can’t grip it, strip it ;)

@MudgunnerMechanix 15 дней назад

Newfie Lock tight

@andymainit8625 3 года назад

Best Tutorial ever!!

@allynevans6 2 года назад

Does the filter have the magnet in it like the John deere brand , nope prolly not .

@Darren1767 2 года назад

It’s a fancy lawn mower, not a race car. Keep calm

@wildbill23c 2 года назад

@@Darren1767 But you added that sticker to the back for more power, so...now its a race mower HAHA!!! With my lawn tractor I change the oil/filter once a year regardless of hours of use, and I use the OEM filter, but after the last filter I bought and seeing the Kohler engine oil is now $11 a quart, my lawn tractor will now be getting the standard off the shelf at the parts store oil that I put in my trucks LOL...I'll just add the additional bottle of ZDDP additive which is about the only difference between regular engine oil like Valvoline, Penzoil, etc. None of today's regular engine oils have ZDDP in them, which is needed to keep push rod engines from destroying the cam lobes.

@Rydrdg Год назад

Lol great attitude 👌

@marianneciovacco8565 Год назад

My JD E100 smokes when I start it, is that the oil? I've clocked 11 hrs and no maintenance...

@Darren1767 Год назад

If I were you I would talk to the store you got it from and see what they are willing to do about it. Assuming you park it indoors that is not normal. Mines 3 years old and never smokes

@marianneciovacco8565 Год назад

@@Darren1767 will do, thanks.

@Darren1767 Год назад

@@marianneciovacco8565 sorry I can’t be of more help, too hard to offer advice without seeing it

@MudgunnerMechanix 15 дней назад

It’s the crappy Briggs engine they put in it. It’s probably the valves out of adjustment. Easy fix

@beaubiddle834 10 месяцев назад

Please list the parts in the description.

@mr-pm4rz Год назад

Now that's a sense of humor.

@cooperbrower4688 2 года назад

Where did you get the chicken CD that you have playing

@Darren1767 2 года назад

It was about 150 chickens

@meals24u 2 года назад

Bruh, you gotta be Canadian 🧐🤣 The vibes are dead give away! I was SURE you’d say checking the dipstick was optional.. 🤣🤣 but nope.. *Speaking of, we got a lot oil, but it’s in Ab and the Dipstick is in Ottawa!* Have a good Day 🤝

@Darren1767 2 года назад

Yep 100% Canadian Eh? I was watching a home reno channel out of the Ottawa area called "Reality Renovision" and the creator, Jeff, said something I liked... He was going on about people making fun of him for saying "level" instead of "plumb or level" and he just said, "I'm Canadian, We're a little weird." Totally describes it. Most of his viewers are American, as are mine. :)

@cooperbrower4688 2 года назад

Torque the filter till it strips then back it off half a turn

@Darren1767 2 года назад

Hahaha

@cooperbrower4688 2 года назад

@@Darren1767 I just bought a 2022 S100 , that's why I watched your video , I subscribed because your sarcastic since of humor , we really need that now days , I went to Harbor Freight looking for a wiring harness lubricating tool they thought I was nuts , what brand is yours

@cooperbrower4688 2 года назад

@@Darren1767 I think I found your wire lube tool , is yours a spiller ?

@terrapinflyer273 2 года назад

That sticker on a JD 😂

@pyroman49wedd86 2 года назад

Also if you modify anything you better change it back . It will void your warranty if they find out.

@Darren1767 Год назад

I’ll be sure to remove the case sticker if my lawn mower needs a warranty repair :)

@pyroman49wedd86 Год назад

@@Darren1767 Hopefully it won’t leave a sticky residue. They may see it

@Darren1767 Год назад

@@pyroman49wedd86 haha

@captainhiltz73 Год назад

Pro Tip: Add flames

@immoegreen200 11 месяцев назад

And mag wheels!!!

@blackdeath5026 Год назад

John Deere recommends every 50 hrs for oil change, i own several and it has always been 50 hrs

@Darren1767 Год назад

Ya, I think I went over the service hours on this one. It’s not going to magically kill it if you go over even by a few hours. But of course it’s smarter to stick to the maintenance schedule they give us.

@jimnyman7919 2 года назад

How do you remove rear wheel on John Deere d.110.

@Darren1767 2 года назад

I’ve never had to do that. Google is your friend though. I would remove the dust cap that’s on the end of the axle and there should probably be a nut to unscrew there. It probably has a cotter pin so you’ll likely need a cotter pin and a socket w/ratchet. Again I’ve never done it on these before but it looks like that may be the case.

@jimnyman7919 2 года назад

No nut no cotter pin?

@kajutisg 3 дня назад

I agree that Fram filters should NOT be used. Fram nowadays is NOT Fram from decades ago. I use WIX filters.

@misterl2875 Год назад

You should ALWAYS lube your electrical wires during EVERY oil change.

@Darren1767 Год назад

I just recently did another dump and fill on this lawn mower with the exact same oil and filter, for some reason the way I parked it this time it didn’t make a mess on the wires! ;)

@memesreview5675 2 года назад

Try Turing the where to fit the tub in

@Darren1767 2 года назад

Try turning the wheel to fit the tub in? That would just make too much sense but when you’re already there why not just keep struggling? Makes for average entertainment.

@memesreview5675 2 года назад

@@Darren1767 your video was fun to watch

@G56AG 2 года назад

It is important to note that you should not use latex gloves around oil, oil deteriorates the latex rubber, the polyurethane gloves are popular and work great, most any material other than latex should work fine. Used motor has all kinds of heavy metals and other substances that can cause serious illness. The gloves used in the video were fine.

@terrapinflyer273 2 года назад

I did not know that... Was about to use some blue gloves I got from work to do some mower maintenance. Not sure if they're latex or not, but gonna assume they are. Thanks!

@Darren1767 Год назад

It was just whatever was “cheap” at the time. I usually buy my gloves from Costco or an auto parts store.

@SLJ2137694 Год назад

Real men don’t wear sissy gloves!

@Just1American1966 Год назад

@@terrapinflyer273 If you work in healthcare, they're probably nitrile, as many patients have latex allergies. Nitrile gloves are good to go.

@prmath Год назад

Canadian roosters sound the same as ours….😄🐔

@Darren1767 Год назад

Haha an American lady once told me “we’re all Americans, North Americans” if only your immigration folks would see it that way ;) you guys are missing some tax paying health care workers ;)

@prmath Год назад

@@Darren1767 partner, I am SOOOOOO Ashamed of this present administration, I wouldn’t even admit my country on the last cruise😱😢😱

@Darren1767 Год назад

@@prmath no better in Canada right now. Our freedoms are being eroded like crazy sadly. Nothing we can do about it.

@prmath Год назад

@@Darren1767 vote ?

@pyroman49wedd86 2 года назад

If it’s still under warranty you better keep receipts to prove you have done maintenance.

@Darren1767 2 года назад

I don’t keep the receipts.

@pyroman49wedd86 2 года назад

@@Darren1767 well good luck if you have warranty work done

@Darren1767 2 года назад

@@pyroman49wedd86 buddy, it’s a lawn Deere. She’s green n yellow. I’m not scared.

@hamb7260 9 месяцев назад

I would recommend tipping the lawnmower to its right to drain all the oil in the engine. Otherwise, great video.

@ianwilson7637 2 года назад

Why is it that all brand new John Deere mowers have their oil filter tightened WAY too much?

@Darren1767 2 года назад

No idea. I did have the wrench backwards at first there but it was super tight. Totally unnecessary eh?

@ianwilson7637 2 года назад

@@Darren1767 Yup, I actually drove a metal rasp through my oil filter in order to get leverage to twist it off, and it snapped the rasp! That's almost a half-inch of metal! I decided to use the rasp when it felt like my overpriced screwdriver was going to snap!

@Diesel9 2 года назад

You are soo funny 😆

@lgstrombolli 9 месяцев назад

First off, oil filters are made for a specific purposes. Motor vehicle filters are not made for riding lawnmowers...

@Darren1767 9 месяцев назад

Don’t worry, I cross referenced the part number at the store… that filter is made for this lawn mower. It’s a lawn mower my good sir. Not a Ferrari. 3 years later and she still cuts the grass like the day she was new.