PlastiDip Rims - Without Taking Wheels off the Car - DipYourCar.com How To

Подписаться 1,3 млн

Просмотров 2,2 млн

50% 1

🚩 Dip Your Wheels this color - www.dipyourcar.com/products/g...
🚗 Shop Wheel Kits - www.dipyourcar.com/pages/dyc-...
🎥 Dip Your Wheels Complete Video Guide- • Plasti Dip Your Wheels...
📙 Learn how to dip here - www.DYCUniversity.com
💦 DYC Detailing Suite - www.dipyourcar.com/collection...
👕 DYC T-Shirts and Merch - www.dipyourcar.com/collection...
Full Tutorial on how to Plasti Dip your rims without taking them off the car. Step by Step from Fonzie at DipYourCar.com
❤️ Please Subscribe to DYC!- ru-vid.com?su...
👍 Join our FB Group - / dipyourcarcommunity
👍 Follow Fonzie on Instagram! - / fonzie
👍 Follow DYC on Instagram! - / dipyourcar
DipYourCar.com is world famous for peelable car and wheel paint. You can change the color of any part of your car by yourself! A do-it-yourself product that you can use at home and is totally affordable. Contact CustomerService@dipyourcar.com if you have any questions about DipYourCar or Plasti Dip Products. Spray and paint your wheels, your car, your emblems, your trim - basically anything. Peel it off and go back to the original color when you are ready. Durable, easy to clean and maintain, dipping your car is something almost anyone can do!

Авто/Мото

Опубликовано:

21 ноя 2011

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 988

@DarrenWellhoefer 7 лет назад

I did this exact thing on my car. Its been 2.2 years and that stuff holds up like a champ. A+

@MASTI_Shotz_ 3 года назад

I haven’t tried it yet but I smell bull

@giveitarub7215 3 года назад

Wouldnt be surprised honestly. On my last car (civic) i did the rear badges and messed up the H badge because i didnt dry it properly on the inside so there was peel along the entire inside bottom of the badge. Thing held up for almost 2 years with the peel through tons of car washes and when I finally got around to taking it off to redo it was a bitch to get off and i ended up using adhesive remover.

@pearlmcp 10 лет назад

I just finished Plasti-dipping my wheels for the first time. I'd like to make a suggestion. After you're done and you're ready to take the trash bag or whatever you used to cover the caliper and rotor, try reaching around the wheel and pull the bag out from behind the wheel.This eliminates any possibility of tearing the Plasti-dip when you pull the bag through the spokes.

@CarlAllen-yo1tc 6 месяцев назад

Old message but after a week of reviewing videos and comments im about to do my wheels as soon as dip comes in but tips very helpful after almost a decade!

@FattyMateo 9 лет назад

Taping is such a waste of time, not to mention you now have adhesive all over everything. Cut up a few trash bags and stuff them between the spokes. Wala! Takes no time, no sticky surfaces and everyone has trash bags

@realbro5548 9 лет назад

That's a great idea! Worked for me. Easier than all that taping.

@jboyynahum3983 9 лет назад

Good idea.

@matthewcaswell9346 9 лет назад

Haha he actually did that in a later video

@HorsepowerGarageVideos 9 лет назад

FattyMateo I used balled up newspaper and stuffed it between the rotor and wheel.

@youknomyname8890 7 лет назад

Wala! ?

@YaNeK92 5 месяцев назад

"I usually respond within an hour regardless of what day or time it is.." - sounds like your work/life balance is right on point my friend 😂😂😂👌🏽

@hamad7217 5 лет назад

Wow Fonz, it's like i'm a part of your family watching you grow (wipes tear from eye)

@jessicasmith3380 10 лет назад

I could listen to you speak all day. You're a very articulate, well spoken man, and it's obvious how intelligent you are. Not bad to look at either. Plasti-dipping skills are also pretty impressive (to say the least).

@ytsearchtimewasters6962 9 лет назад

Ask him for his number already

@jessicasmith3380 9 лет назад

And what would that achieve?

@ytsearchtimewasters6962 9 лет назад

Jessica Smith lol his heavenly voice.. haha im just being a dick

@ytsearchtimewasters6962 9 лет назад

L Britez you know you were serious lmfao

@lyricaljudge 9 лет назад

She wants him to plasti dip that pussayyy and bite it back off 😉😂😂😂

@tyrags 11 лет назад

After watching this video compared to your newer ones, you can see how far you and your company have come. Good work!

@ninoellison7793 9 лет назад

An invaluable clip. Thank you. You're a great presenter.

@Tdizzful 10 лет назад

Did mine today, Got all 4 wheels done with 1 can, i ordered 2, I did 3-4 coats too, but made sure it all went on the wheel. so worth it

@devonlee6575 4 года назад

Dillinger120 do you drive a golf cart?

@DaytonCarCare 10 лет назад

Might want to mention to clean the wheels real well before paint. Also you can use a metal file or even a small 4" grinding wheel to smooth out the curb rash on the rim before paint. ☺

@chrisv1151 8 месяцев назад

He did

@Querencias7 9 лет назад

Great job Fonzie. I like your all-business / responsibility approach in showing the excellent properties of PD, as well as your own expertise. Thanks for these very helpful videos.

@GeorgeLogic 10 лет назад

Wow! This is great. I had planned to do it a totally different way. That's amazing!

@D2Vitalx 9 лет назад

Thanks for this man, just finished mine and it was flawless.

@christhelegend4753 8 лет назад

this guy has great hand movement

@lancejohnson108 11 лет назад

Thanks. I added a final thicker coat and the finish is smoother.I definitely agree with you about making sure the can doesn't get too low. I think there was a place where aerosol w/ no PlastiDip came out and it made the finish pretty bumpy. The final thicker coat helped smooth that area some, but still not as smooth as the other areas. I was an easy way to black out my rims and isn't permanent.

@biobclipzz1242 2 года назад

Thank you so much I didn’t know what to do with my wheels and now I can get black trims without taking all 4 wheels off

@1ProtonProductions1 9 лет назад

So, it really is that simple

@iLLFXdrUms 9 лет назад

***** Lmao!! I just said the same shit to myself...I've been putting it off thinking it was going to be a bit of pain in the ass, but it was easy as fuck.

@kingkong1191 11 лет назад

After I finished the first coat, how long do I have to wait for doing the second coat? How to clean the brake dust from the rims?

@mcfly69505 11 лет назад

I just did my stock wheels (AKA Pie plates) on my C5 A6 4.2 and it turned out beautifully! Did the garbage bag trick covering the brakes and did 4 coats. Did it in 45-50 degree weather.

@hilldog83 11 лет назад

I did mine lastweek with the glossifier and my wheels were dipped for over 8 months. They turned out perfect.

@bullsnation5420 8 лет назад

You said light dusting ? But what I see is a fully black wheel?

@ZoCutit 6 лет назад

Bullsnation it’s edited

@santabarbaratribe 6 лет назад

Bullsnation I thought the same damn thing

@michaellaw1531 5 лет назад

he meant light dusting as a way of spraying the wheel overall, you don't want the dip to drip or pool so he recommends a light dusting technique (i just noticed you posted this 2 years ago but)

@siggysou8832 5 лет назад

OnionDippy hahahahaha

@conqwiztadore2213 4 года назад

terrible editing

@stevensteele45 9 лет назад

Hey, you can use the tiny balloons to slide over your bolts if you don't want those painted.

@9teen96 9 лет назад

Awesome tip man!

@efatcwo Год назад

Finger condoms also work. Or real condoms if you have extra small on hand like me :)

@DIYAmateurHour 10 лет назад

DipYourCar actually washes their dipped cars with a pressure washer. Plastidip is just like real paint, except that it peels off when you want it too. I plastidipped by buddy's charger, the entire car, about 2 months ago. looks great and he washes it all the time.

@angieleon1112 9 лет назад

i bought vintage gold from dipyourcar.com and i just finished my rims and i must say it came out amazing i had no problems with the can.

@DirtyLiberal15 11 лет назад

I was able to cover my BMW's 20" rims with two cans, four coats each rim.

@TheFillyFill 10 лет назад

Do you think getting new tires would mess it all up? Meaning when they balance the tires and just put them onto that machine to get the new tire onto the rim. I was wanting to do this completely black out my stang lol

@Xtony90 9 лет назад

Have them balance it with sticky weights. Typically its known as A4 on the balaancer

@mains3rv3r 12 лет назад

just did this today to my 05 gto stock 17s. there is no need to take the wheels off if you can get every angle.. came out awesome.. did 5 coats each wheel.. so far looks excellent.. even if it comes off for some odd reason after a while i'll probably do this again.. costed me about $10.. can't go wrong with this

@ShaunDYST 7 лет назад

Just got a 2015 yellow Camaro and it has chrome rims, something about chrome I just don't like and I know the black will look amazing with the yellow so I have to try this out, thanks for the great video!

@BlueOvals24 7 лет назад

Hold on, you still have to remove the tire to tape up the calipers and rotors/drums. Kind of defeats the purpose

@jellbell637 7 лет назад

same thing I was thinking.

@ThatGaijinFella 7 лет назад

A bit of careful manoeuvring through the rim holes and it's easy to tape off.

@BlueOvals24 7 лет назад

I actually tried it without taping them off and it worked as good

@jellbell637 7 лет назад

really? did it affect your brakes or did it wash off with a car wash?

@BlueOvals24 7 лет назад

Nope. I have drums in the rear so I didnt worry too much about paint, just wrapped the bag around it a little. For the disks, I just wrapped the bag tightly around the rotor. As long as there isnt much wind, those bags wont go anywhere and they cover the rotor completely

@vdog12ify 8 лет назад

would this help damaged rims look better. to are my rims are kind of scraped up so do you think this will help

@BesideTheBrave 8 лет назад

+vernon russell yes! i had curb rash and scrapes and my tires look clean AF now, you need to give the affected areas a lil more TLC in your spray pattern so you dont make an uneven mess.

@charellesmith5788 5 лет назад

vernon russell o

@muhammad-bin-american 6 месяцев назад

Thanks for sharing. Will consider this. I would wear mask and also cover the entire left front area with newspapers unless its safe on the paint. Just extra precautions.

@bloodgirl4 11 лет назад

I have 15 inch wheels on my Mazda and I used 2 cans completely. Came out really well, mine were corroded beyond fixing, so I covered them with this. It comes out really even. Even if you kind screw up. I've also done my emblems and they look good after 3 months. I love plasti dip =P

@katelynlejeune2200 10 лет назад

I was wondering if you can plasti dip anthracite rims??

@catrashoo 4 года назад

What are they ?

@berretta510 10 лет назад

Do a video on deep dish wheels with only the inside of the rim being painted leaving the chrome lip

@rosachavez8019 9 лет назад

Nicely said & done.now I know I can to this on my car without paying anyone. Thanks

@Slushplop 11 лет назад

the plastic bag technique works wonders, I just did it yesterday. easy as hell.

@NusultanTuljakbaj 7 лет назад

How do you take the wheels off? What is plasti dip and why am I commenting this video..?

@JakeWardell 7 лет назад

lol

@MaipuruSyrup 5 лет назад

Well the wheels on the car have a lug nut cover to make it harder for people to steal anything from the wheels. P.S. It's also to hide the lug nuts to look pretty.

@kyosenofficial 4 года назад

Jack hammer, and axe are the best ways to remove stuff from things i find. If it fights back a cross bow is also handy. Hope this helps.

@Supraguy23 9 лет назад

just use index cards around the wheel besides taping around a wheel takes a long time.

@DRAKEJUN1OR 7 лет назад

Jon Cianflone won't fit on all wheels

@SuperGulfwarvet 8 лет назад

Hey brother awesome video! I've seen a lot of videos where they suggest thorough cleaning of the rims b4 dipping. Makes sense but what products are the best for this? Tire &Wheel cleaner, degreaser??? Thanks

@Theleftpinky 11 лет назад

i did it just like he shows here. the key is to take your time. it took me about 2 hours to do. that may seem like a lot. but they came out beautiful

@stephenchimenti 10 лет назад

What do you do when you cant get in the rims to tape the brakes? My rims have lots of spokes so i cant get my hand in there.

@misterscienceguy 10 лет назад

You're going to have to take the wheels off then, it's not too hard.

@stephenchimenti 10 лет назад

thanks

@Joshw124 10 лет назад

look up how they put trash bags in there. that's wut I did today, just did mine. if u cnt fit ur fingers in to weave a bag threw try to use something small to pull it threw for u. it works very well, otherwise yea take the wheels off.

@stephenchimenti 10 лет назад

Joshw124 Ill try that thanks

@JV8391 10 лет назад

Didnt think of the trashbag will have to try, thanx!

@lenabobena 9 лет назад

How do you tape off the inside?

@stephthompson4512 6 лет назад

lenabobena fine as

@okmilly1605 6 лет назад

T-Roy IRH 😂

@robh.3124 5 лет назад

Lol

@Aleksandar6ix 10 лет назад

I will be getting a new car soon, and would consider PD for my wheels. A couple questions though based on off-car work: 1. wheel nut seats: masking might be hard, is it easy enough to take off to ensure proper seating of the wheel nuts? 2. maintenance: when shops repair flats, or you change your tires and reballance, is it easy to touch up? 3: how easy is PD to remove?

@jsrt8677 7 лет назад

Great Video Bro!! Thanks👍🏿

@Duc1198YamR1 8 лет назад

how many cans does it take to paint 4 wheels? thank you

@dethtour 8 лет назад

+Duc1198YamR1 1 for each wheel. you can do it with 3 but 4 to be safe

@danmal9190 6 лет назад

I did 4 rims, grill and all emblems with 2 cans

@rileypeters5008 6 лет назад

dan mal you did it WAY to thin then. You will have a hard time getting it off. With plasti dip it’s not about how much it takes to make it look good, it is how much to make it look good and be functional when needed.

@leorodriguez6080 6 лет назад

Riley Peters what do you mean? Do you need a thick coat?

@Sparkyh 6 лет назад

Just out of curiosity 6 months later how is the plasti dip holding up? if you havent removed em yet...

@TechManKnows 7 лет назад

bout to plasti dip the rims on my white smart car hahahha

@DirtyLiberal15 11 лет назад

Yes, it will work on any finish of rim, plasti dip will not harm your rims in any way, so if you decide to peel it off, your chrome with be like it was when you sprayed it on :)

@bacaboi 12 лет назад

I plasti dipped my Avenger and uploaded a video a minute ago of the results. Plasti dip is awesome!

@Romband1919 8 лет назад

Can I plasti dip bald head black 😀

@endlesssky4626 8 лет назад

Yes

@ixii0003 5 лет назад

HAHAHAHA

@ps3duder 11 лет назад

"6 inches away" as he's 1/2 an inch away.

@the_k_space 3 года назад

Lmao

@snarz0n 12 лет назад

Nice videos, very informal! Short question though; how will the rims react to road salt when having them sprayed?

@iloveEthosvids 11 лет назад

this guy is awesome, I literally just done that to my wheels and they came out awesome, even did my door handles and mustang emblem in the back. (2005 white v6 mustang)

@campz0r 9 лет назад

That curb rash is still pretty visible.

@wjlowe111 9 лет назад

looks like shit

@VystreloK 9 лет назад

I think sanding before then plastidip would look much better

@bombardment92 9 лет назад

Glazing putty, feather it in, paint it

@aray493 6 лет назад

Should've used a little bondo to rub in the gashes, wouldn't fix it but it would be less visible

@jaimegarcia-yz1rm 7 лет назад

will they wash off at car wash?

@WuzohHitsBills 7 лет назад

@jaimegarcia-yz1rm 7 лет назад

Nice thanks again

@thethimetraveler 7 лет назад

No way. My dipped rims have been through about 3 NY winters, car washes and still look newly sprayed. Don't even bother with special rags, I just wash with soap and water whenever I wash my car.

@jaimegarcia-yz1rm 7 лет назад

Nice

@AceDeuce221981 3 года назад

Excellent info. Plan on doing this asap👍

@jetsgo66 11 лет назад

Plastidip is amaaaaazing, I did my emblems rear tail light and front sinal lights gas door going to do rims and maybe hood this weekend

@7FP3 12 лет назад

Love the porn music in background!

@yankee54 8 лет назад

I need a hot guy to do this for me to my car lol 😛

@rileytavares4087 8 лет назад

😎 some one called me!? My name is Bond.. James Bond,how may I assist you princess!?😏 lol

@thesturgeon3079 8 лет назад

+Denis DiCaprio cringe

@gagelidstone3671 8 лет назад

+Denis DiCaprio dude that was gay as fuck

@doc_s1krr751 8 лет назад

+Denis DiCaprio calling other people creeps while you're hitting on a girl over youtube 😂 priceless

@rileytavares4087 8 лет назад

if you read comment AGAIN, you'd noticed I mentioned that he is "all over my nuts,meaning he's all over my youtube shits" and my comment was a joke. why would approach a girl by calling myself "James bond" . knock some sense i to your head Darius Whited.obviously u needed some attention😂😂

@minesy72 7 лет назад

it looks great!! check the end result the curb rash looks worse.

@simonmmk437 12 лет назад

Awesome vid! I'm trying to decide what to do with my Charger on 22s. So many choices

@MrDreadfu1 10 лет назад

Did mine yesterday.. I failed lol so I'm gonna try again today. Don't rush!

@chrismontoya79 12 лет назад

I just plasti dipped my WHOLE car. It turned out GREAT! I am soo happy with it. I was originally planning to get it re-painted so I sanded the whole car down with 400 wet. I used to work in a high end body shop so sanding cars and prepping them is not a big deal. I am curios to see how long this will last. I put on 7 good coats, do you think the plasti dip will last longer if I wiped it down once a week with some sort of protector such as Amor all?

@RobertPlattBell 10 лет назад

Fascinating video. Great solution for older wheels.

@INT3L818 11 лет назад

It did, Now i gotta make time this weekend to do my wheels again..

@GunTotinHippie 10 лет назад

I used trash bags to cover the brake discs and dipped my wheels still on the truck. It came out awesome. Took me a little under 2 cans to do wheels, badges, and license plate covers. Plus tape the total investment was $20.07 plus a couple hours and some beer.

@wellingbadboy 11 лет назад

Sweet job man. going to spray my rims. you make it look so easy :-) can i get gloss finish though??

@richardmontoya1093 8 лет назад

Old fonzie videos are the best!!!!!

@Bennytree 6 лет назад

Thanks for the video. Quick question. I dipped my wheels about a week ago and I'm noticing a few thin spots. Would it be okay to clean them and add a few more coats? Would they bond to the previous coats? Thanks in advance

@HellBoundsOnMyTrail 10 лет назад

Great vid thanks. Im about to do mine now, thanks.

@marcobonafe3038 9 лет назад

good day, you videos are all great, and I am also planning to Plasti Dip my wheels, I just want to ask, regarding the Lug nuts, after applying Plasti Dip on the lug nuts, do you need to cut the edges so that it will be separated from the mags itself when you try to remove it in cases like having a flat tire or something. thanks.

@reasomb16 10 лет назад

Hi Fonzie... just curious if plasti dip will be damage using tire changer? If it does on the edges... how can you repair it without re-painting the entire rims. Thank you.

@AddemRector 12 лет назад

I plasti dipped my rims 2 days ago, and it looked great. But today I noticed it was peeling on almost all of the wheels. I did exactly what you did on here. Light coats, up to about 4 coats. But right where the weight balance was it started peeling and around the lip. I went around the lip like you did but still it peeled. I redid 2 of my rims today, hopefully it will stay on this time.

@BuiltCruisers 5 лет назад

Great video! Going to try it tomorrow! How many cans does it take to do 5 wheels?

@mikehaines5467 6 лет назад

Just watched this cause I’m gonna do the rims on my black 07 fusion se, I’m getting new tires and brakes. So might as well 🤘🏻

@TalhaFazlani 12 лет назад

I bought three cans and painted the rims on my BWM Convertible black. I bought three but two are more than enough. Within an hour of me finishing the last coat, it started raining but the paint had dried by then. My car looks great.

@miket4685 9 лет назад

Another great video Fonzie! Do you have any videos on a clear Plastidip bra for a car. I am trying to achieve the same original paint as possible. Thanks!

@hockybumm 11 лет назад

i have an 04 cts and i wasnt sure how it would look..but this video helped me out thanks!!

@Josemiragels 12 лет назад

Awsome just got my cans today will plasti dip my rims tomorrow morning

@Raven_of_Alaska 12 лет назад

This video save my but a load of work thank man your awesome.

@pyzik200 12 лет назад

Wow, you can expect an order from me shortly! My Konigs would look awesome with this.

@TheGuyAcrossDaStreet 11 лет назад

Just got finished plasti dipping my mazdas wheels, looks good

@cheungwaiyin6032 10 лет назад

Thanks! Very useful for me

@sleepygolferlaurent 7 лет назад

any chance you can post a video on how to properly tape up the wheels? I have everything however I dont want to go ahead and do the process without properly knowing how to tape up the brakes and such

@thruthebloodofchrist 10 лет назад

Great video. What are the drying times between coats and the final coat to driving. Thanks!

@fffelipon Год назад

Thanks for the video man, Your rims have bolts? And if they have you don’t have any problem with the paint?

@docjody8624 3 месяца назад

Fabulous video. Hey, 1/ When removing a wheel later-- will the Lug Wrench scratch the Plasti-Dip off the Lug Nuts? Seems some of the black would peel off, exposing the silver metal underneath? THANKS! Great chob! 2/ How many cans needed for all 4-Wheels?

@XxWaNt5oM3xX 12 лет назад

I have over 10,000 miles on my plastidiped rims, the only place that is messed up is in around the lug nuts when I rotated my tires I chipped it in a few spots but you cant tell with the lug nuts in. Over all very impressed, only downside is you have to be very careful when washing them.

@zia83 10 лет назад

I have 2011 Cadillac SRX Performance Edition with chrome color 20 inch stock rims. Any suggestions will be appreciated> Nice work btw thanks

@TheBBallEnthusiast 12 лет назад

Thanks man, I really appreciate that.

@Cayenne1199 11 лет назад

Doing my rims tomorrow!

@send2dwight 7 лет назад

Great video and channel!! how long will this last?

@1IImrxII1 12 лет назад

Thanks for the upload

@phillyfan1975 12 лет назад

Thank you for a simple how to video. I will be Plasti Dipping my wheels on my stock 2008 mustang this week. I would have liked to have seen a full side view before and after at the end. Still a good vid thogh

@kevindannecker4147 11 лет назад

i havent tried going into the carwash but i think itll be good cause i pressure washed my rims multiple times. still looks brand new

@kidb1321562 11 лет назад

I put 6 coats on mine,out of 4 cans,I had it on for a month now and it still looks new,it's been raining of and on for 5 days now, no lifting or anything still looks good

@nicksantoianni5077 11 лет назад

I'm dipping my chevy sonic mags tomorrow, I can't wait the all black will officially be complete

@Loren400 10 лет назад

I came to watch this video before starting on my car.. I did a double-take when I realized I had those exact same rims.. And that car! 04 CTS! My car is black, and looks fantastic with black rims. It was as easy as I've heard, but oh my god my arms and legs.. I'm exhausted.

@crix868 12 лет назад

This is amazing! How many cans would I need to cover a set of 17inch rims? Also my rims looked scratched up how bad the clear coat it faded so should I use a gloss or flat or would it now matter?