Taper Jig For Long Cuts | Table Saw Jointer Jig

Подписаться 17 тыс.

Просмотров 26 тыс.

50% 1

In this woodworking jig video I'll show you how to make a DIY table saw taper jig for long cuts. You can also use this jig as a table saw jointer jig (edge jointing jig) or straight line jig. But first I'll discuss whether you should make your own or build one. For me it made sense to make a DIY jig because it saved money and also had more capability. This is an upgrade over the more expensive one I could have purchased. It's heavier duty and I can also use this jig for much larger work pieces.
I'll walk through all the steps to cut all the pieces using my DeWalt table saw and Kobalt miter saw. Then I'll assemble and test my new taper jig/joinery sled. I also used Powertec t-track and I cut the dado slots with my Ridgid trim router.
I love making new woodworking jigs for my DeWalt DWE7491 table saw and I have more in the works!
Welcome to How I Do Things DIY! Subscribe for more videos like this!
More must have table saw accessories: • MUST HAVE Table Saw Ac...
Downloadable plans:
howidothingsdiy.com/plans/ols...
Amazon Associates Links
Countersink Drill Bits-amzn.to/2SF1xQY
2P-10 CA Glue-amzn.to/2SGiASF
Powertec T-Track-amzn.to/3uypmXW
Hold Down Toggle Clamps-amzn.to/3wIenNb
Music Provided by Tyler M. Check out his Channel!
/ @tyler_m_tunes
Webpage
howidothingsdiy.com/
Instagram
/ howidothingsdiy
Facebook
/ howidothingsdiy
Video Chapters
0:00 Intro
0:46 Cut base & fence to size
1:18 Install t-tracks
2:45 Cut and install miter slot guide
5:39 Make fence
9:37 Install hold down clamps
11:29 Make/install handle
12:20 Wax Base
12:38 Test
12:55 Closing
#taperjig
#bourbonmoth
#WoodworkingforMereMortals
#3x3customs
#joinersled
#howIDoThingsDIY
#woodworking
#tablesawjig
#tablesawjigs
#woodworking
#plans
#downloadable plans
#woodworking plans

Хобби

Опубликовано:

15 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 44

@HowIDoThingsDIY 3 года назад

This is a must have table saw jig and can be used for tapers or straight line cuts on rough sawn lumber. Drop me a comment and let me know what other features you would put on yours.

@MakewithJake 3 года назад

Great build! I love how chill the music is. good vibes. 👍

@HowIDoThingsDIY 3 года назад

Thanks! All the music is my cousins'. I have a link in my description if you want to check out his channel.

@mpe777 9 месяцев назад

I’m making this one for sure. The easiest and most sensible homemade taper jig I’ve seen to date and trust me I’ve been comparing. Bravo!!!

@HowIDoThingsDIY 9 месяцев назад

Thanks so much. I sell the plans on my website for $5 if you need any additional guidance. Thanks for the comment. Let me know if you have any questions. howidothingsdiy.com/plans/ols/products/table-saw-taperingjointing-jig

@mpe777 9 месяцев назад

@@HowIDoThingsDIY Ok cool. I'll take a look at it now.

@AceWoodCo 3 года назад

Definitely a must have jig for a tablesaw!

@HowIDoThingsDIY 3 года назад

For sure!

@mainerdiy8399 Год назад

Definitely on my list to make. I think I would mostly use it for tapered table legs. Great build and instructional.

@HowIDoThingsDIY Год назад

That's awesome. If you want any more assistance, I have very reasonably priced plans for it on my website. Thanks so much for the comment. howidothingsdiy.com/plans/ols/products/table-saw-taperingjointing-jig

@inspiringbuilds 3 года назад

Watched all the watch through, nice job! I have this jig and was thinking about doing a video a couple months back, great minds think alike. Jigs make it so much easier for us builders, along with increasing accuracy and efficiency!

@HowIDoThingsDIY 3 года назад

You have to make one. They're awesome!

@LincolnsCreationsandRentals 3 года назад

You're making all the things on my list to make lol

@HowIDoThingsDIY 3 года назад

Haha. Well, I'm trying to knock out some of the basic things I need. The next two I have planned will defiantly not be on your list.

@robertberry6655 8 месяцев назад

AWESOME JIG. THANKS

@HowIDoThingsDIY 8 месяцев назад

Thanks and you're welcome!!!

@JustaDude123 3 года назад

Great video and awesome tips. Going to have to build one now, well . . . when plywood prices come down.

@HowIDoThingsDIY 3 года назад

Oh my God, right?! I just spend $77 on a 3/4" sheet. I actually hear they are going up like 30% in July....

@luizzahome 3 года назад

hello guinea master, nice content, you are doing a good job, congratulations master👍🏻☺️🛎

@HowIDoThingsDIY 3 года назад

Thanks.

@EricMeyerMaker 3 года назад

It looks like this could double as a edge jointing jig or if you needed to put a straight edge on a live edge board. Very cool.

@HowIDoThingsDIY 3 года назад

Exactly. I plan to use it for this as well!

@derekpeterson5123 3 года назад

Great video but the thumbs up after every little part is finished is SO annoying! Almost every RU-vidr does it and it is WAY OVER used! Thanks for sharing your time and talent!

@HowIDoThingsDIY 3 года назад

Good tip!

@DIMTips 3 года назад

What a great jig. That is going to come in really handy.

@inspiringbuilds 3 года назад

It’s a game changer making cutting tapered cut or making a straight edge a breeze so you can flip it over and have two straight edges only using a table saw. 👍🏼

@HowIDoThingsDIY 3 года назад

Thank you, Sir! I expect to use it a lot when I build my new studio desk!

@nateswoodcraft6715 3 года назад

Nice job sir. Ever think about adding a stationary board in the other miter slot to create a kind of zero clearance? Just something I thought of watching you cut 👍

@HowIDoThingsDIY 3 года назад

That's an interesting idea! I could but to be honest, with the one side fully supported it left a very clean cut. Thanks!

@SinnisjInsulator 3 года назад

This is a great video, such great workmanship. Oh what music are you using for your background?

@HowIDoThingsDIY 3 года назад

This is my cousins' music from his RU-vid channel. There's a link to his channel in my description. His channel is Tyler M.

@SinnisjInsulator 3 года назад

@@HowIDoThingsDIY ah ok cool, thank you. It's very chill music.

@bijan4727 7 месяцев назад

Hi an excellent presentation. I noticed there were almost any saw dust when you were working with table saw. Is it because of your Dewalt saw extractor? If so , it almost captures 90%. Would you agree with 90% , if not what would you rate it ? Could you post the model number of your saw extractor ? Can I use 6RPM ridgid shop vac instead. I would really appreciate your feedback. What is the length of your jig ?

@HowIDoThingsDIY 7 месяцев назад

Sure! Here is the dust extractor amzn.to/3Rl4KkN. Yes, in this video, it was reducing dust by maybe 85%. I've also noticed that the type of blade I used makes a difference. Aldo zero clearance insert helps a little. The red one I use is a combination blade, and the silver one is for ripping. I don't remember which one I used in this video. I'm pretty sure I made the jig 48" long. I have plans on my website if you're interested. howidothingsdiy.com/plans/ols/products/table-saw-taperingjointing-jig. Let me know if you have other questions.

@Woodenduckk 11 месяцев назад

Why not let the jig run against the table saw fence? Seems it would be easier and more accurate that way. Also it would be possibe to cut wider boards.

@HowIDoThingsDIY 11 месяцев назад

That is another way to go. There would be pros and cons to both. I actually like having the guide rail instead of having to think about keeping it tight against the fence while cutting.

@johnpurcell7728 3 года назад

Can the toggle clamps you use handle a 1-1/2” thick board (e.g. a 2x4). I need to make one of these.

@HowIDoThingsDIY 3 года назад

I have them adjusted almost all the way down for 3/4" board. Haven't tried 1 1/2 but you could add a spacer.

@robertdennis1439 2 года назад

My gosh there has got to be a better way to secure the t tracks in rather than grinding down the points of the screws and the underside nice and smooth…could you just use ca glue ? Shorter screw? Thicker plywood base?…..thanks ,,still love the overall design

@HowIDoThingsDIY 2 года назад

Haha, yes, for sure. Use a little shorter screws. I was just working with what I had. I wanted to show my mistake and show how I corrected it. Thanks for watching!

@dominica2392 Год назад

I have the same saw can you make me one?

@HowIDoThingsDIY Год назад

Sorry, I don't do that, but I appreciate the interest. I do have plans available on my website. I hope this helps. Thanks. howidothingsdiy.com/plans/ols/products/table-saw-taperingjointing-jig

@jandykane Год назад

Great build, but minute 7:30. Yikes

@HowIDoThingsDIY Год назад

Thanks! Ya, I should have maybe done that on the table saw. At that point, I had just gotten it, and my brain wasn't thinking table saw yet. If I were to make this again, I probably wouldn't have gotten the miter saw out. Haha