Taranis X-Lite Easy Firmware Upgrade 😀

Подписаться 61 тыс.

Просмотров 31 тыс.

50% 1

A simple and easy way to upgrade your firmware on the Taranis X-Lite.
⚡Taranis X-Lite Transmitter - bit.ly/2LUbNzQ
👉Firmware downloads - bit.ly/2UDYSmP
💲Help support the channel for more videos like this
👉 / albertkim
🎁Additional giveaways just for Patreons!
💲 Banggood Coupons: toyho || toysho
19RCSP 9%off EXP 2019/3/16
184350 8%OFF exp 2019/6/26
►BG Flash Deals - bit.ly/2Ulf10c
►Banggood App - bit.ly/2Ul7Sgz
💲 Coupon Code 19RCSP for 9% off these items
Aikon F4 Mini Flight Controller - bit.ly/2Upa3jc
Aikon BLHeli_32 3-6S 25A ESC - bit.ly/2UoPJhK
Kakute F7 / ESC/ VTX Stack Combo - bit.ly/2Um0Gkq
Kakute F7 Flight Controller - bit.ly/2UkanQn
Tekko32F3 32-bit ESC - bit.ly/2UkwJ4d
Atlatl V2 VTX - bit.ly/2UkvXnP
HGLRC Forward F7 Dual Gyro FC - bit.ly/2UjNBrA
HGLRC Forward F4 AIO Mini FC - bit.ly/2UjOmRs
HGLRC 1408 2400/3600kv Motors - bit.ly/2UfV7no
▼ RC Gear
Jumper T12 Plus Transmitter - bit.ly/2XDUt5p
FrSky X-Lite Transmitter - bit.ly/2IV3cg3
Fatshark Dominator V3 Goggles - amzn.to/2eY6dhF
Menace Bandicoot Antenna - bit.ly/2UjEKX2
Foxeer Lollipop 2 Antenna - bit.ly/2P3Lchg
Triple Feed Patch Antenna - bit.ly/2P1wMyq
▼ Batteries
GNB 520mah 3S HV - bit.ly/2Un3UnB
▼ Tools
Awesome & Cheap Tool Kit - bit.ly/2U2CS4G
Xiaomi Electric Screwdriver - bit.ly/2OBa9k3
Cloth Tape - amzn.to/2JpCx5U
Hakko Soldering Station - amzn.to/2Pn5J1v
Mini TS100 Portable Soldering Iron - bit.ly/2z3V05Y
63/37 Solder - amzn.to/2De9rsz
▼ My Favorite Micro Drones
GEPRC Cygnet CX3 - bit.ly/2TUvFUm
KingKong ET115 v2 - bit.ly/2U1xkHy
EMAX Babyhawk-R PRO - bit.ly/2TUL0Eg
GEPRC Phoenix 2.5 - bit.ly/2TRpobW
Diatone GT-M3 - bit.ly/2TVaykL
▼ My Favorite 5-inch Drones
HGLRC Batman220 - bit.ly/2TOUfG6
Diatone GT-Tyrant 540 - bit.ly/2TVzTLA
EMAX Hawk 5 - bit.ly/2TU1ixr
▼ Camera Gear
Sony RX100 Mark V - amzn.to/2xpZk0c
DJI Osmo Pocket - amzn.to/2Q5xGiv
GoPro Hero Session 5 - amzn.to/2xpwBsj
Hawkeye Firefly 8S 4K - bit.ly/2Po2SVO
Hawkeye Firefly 8SE 4K - bit.ly/2PmYvdH
SJCam SJ7 Star 4K - goo.gl/BzWpii
RunCam2 - bit.ly/2PmDaBf
Mobius Mini - amzn.to/2PrDtv4
Samsung Galaxy Note 8 - amzn.to/2wTF4lW
▼ My Camera Drones
DJI Mavic Pro - amzn.to/2wTIzcg
▼ Other Fun Gear
Xiaomi M365 Electric Scooter - amzn.to/2qFHH71
Zhiyun Smooth 4 Gimbal - amzn.to/2Dg4Jc7
▼ My FPV Camera Review Rig
• Micro Night FPV with O...
My video editor - amzn.to/1VJHWp7
My editing PC - amzn.to/2MhlR3g
👉s u b s c r i b e - bit.ly/2QH0OZt
💰 Latest sales and coupon codes
🐦 / albertkim
🎁s e c r e t g i v e a w a y s
/ marblekit
💰 d o n a t e
Donate via PayPal - paypal.me/marblekit
Bitcoin - 12Y5vysDMvgqX4Z7h7iRTsgwWoCNwv9MPs
Ethereum - 0xD8f3758678F3d93539F804e36811f0A04B0D047F
Litecoin - LcyGPS2f3NZxWU6BRkCJ5qdk1zV6jUCtn8
👉PLAYLISTS
FPV Camera Reviews - bit.ly/2Nb9WIh
Micro Drone Review - bit.ly/2O2FTOH
Frame Review - bit.ly/2O48KSU
Quadcopter Builds - bit.ly/2O55ypY
Tutorials - bit.ly/2NYJy01
Haul Time - bit.ly/2O2Hkwz
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
#taranis #Xlite #tutorial

Наука

Опубликовано:

7 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 61

@mshane86 5 лет назад

I had no idea what firmware to choose and was winging it on my own but this really helped. Way easier than open tx companion!

@batmojuice5704 5 лет назад

Worked like a champ. Thanks so much.

@elliottcorke7542 5 лет назад

Really helpful, thanks!

@MCsCreations 6 лет назад

Nice and easy, Albert! Great work! 😀

@dronereviewman9580 6 лет назад

This is a really cool looking remote! But i really like my Qx7!! COOL POST!!

@MiniMicroFPV 6 лет назад

Simplest is best. I also like this method as it works easily on a Mac:)

@JohnathanVail 5 лет назад

Is easy if you know what to do. Thanks for the tips. One more tip is if you aren't loading from the FrSky site you need to load the companion to download the bin file for you. I got stuck on that for a few minutes.

@EdwardChew 4 года назад

Thanks for sharing bro. just updated to 2.3.9 latest fw

@stuartgrandison1 3 года назад

I brought my x lite used. Is the Bootloader-2.3.9 the latest update?

@TheWestysworld 5 лет назад

hey man im doing this right now and when i try to copy the updated files on to the other ones as you show it comes up asking if i should replace or merge?

@charasmayhem497 5 лет назад

you got 3 files when downloading the sd card files, i got 2?

@planesandbikes7353 3 года назад

helpful but this all needs an update as I cannot find the firmware, OpenTx wants me to only update using Companion, but Companion fails to flash every time! Can't find the files to do it using sd card

@clittlej5850 6 лет назад

Thanks for this! It helps me a lot.. I’ve been using it stock since I got it. I also wondered about models erasing and see you answered that below. My other question is what to do with the rest of the files on the SD card? Just leave it in there now forever with the files on it? And how do you activate the sounds and voice telling you timers and voltage and things? Thanks for the awesome video, I hope you do more walk throughs with this transmitter, as it’s my first frsky, I don’t know how to do all the things most people have learned before, and the old videos don’t help much because the tx’s are different. 🍻🍻

@clittlej5850 6 лет назад

Unrelated but kind of related, I also can’t get RSSI working on the xm+. Videos show it just working on channel 16 but mine isn’t for some reason. The RXSR works perfectly though.

@AlbertKimTV 6 лет назад

The XM+ needs a firmware upgrade with the RSSI mod to get that to work. Download at the FrSky website.

@clittlej5850 6 лет назад

Albert Kim thank you! That gives me a place to start! I’ll look more into that now 🍻🍻

@sierraiglesias6773 6 лет назад

Hello I would like you to do the text of the excelvan 2400kv engines

@Buffetology 4 года назад

great stuff, but how did you get the left stick to stay down, mine stays in the middle position when I let go.

@SpaceFaceFPV 4 года назад

On the back of the radio there’s some screw holes, and in certain ones there are set screws that allow tension and return adjustments, just don’t lose the set screws!!! Very hard to find replacements. You’ll take the longer one out of the side that you use for throttle. I’m sure you can find a better description on RU-vid tutorials ;) but there ya go. They all come new like that, set up neither mode, as they can be mode 1 or mode 2 that way :)

@yodayedi2325 6 лет назад

nice

@giaxxone 6 лет назад

I got 2 Xlites about a month ago and they both came with the new firmware installed??? Easy enough to check the version though.

@AlbertKimTV 6 лет назад

Mine came with older firmware.

@81velly 5 лет назад

How do I know if I have the newer firmware

@81velly 5 лет назад

Just got mine today

@frankbarajas 6 лет назад

Hey Al, can you use the multi-protocol 4-n-1 module in this TX? I have arthritis in my hands, which is getting worse, had to switch from my X9D to the QX7 because of it late last year. I held off on this TX, because of the battery situation on it, but I am still very interested.

@AlbertKimTV 6 лет назад

The pin outs are the same but obviously a JR module won't fit without some kind of adapter. I haven't tried the one I have yet but I think it will work. Also, there is a mini 4-in-1 module coming soon... check it out here - bit.ly/2KtVEfR

@dronereviewman9580 6 лет назад

Frank Barajas. Arthritis sucks!!! I got rumitod arthritis in my left knee when i was 9 year's old and now its in my left arm!!! It sucks!!! Hope its not to swollen and you get some flying in!!! It just stoped raining and its so muggy im not even going to fly today!!! I love my Qx7. But did want a xd9 just cost to much compared to the Qx7!!!!

@frankbarajas 6 лет назад

Hey Drone man - Oh wow, I can't even begin to imagine having it in your shoulder, sleeping might not be much fun, let alone holding up a TX. Unfortunately, yeah, I got it kind of bad too. I have it in my knees, which is bad enough but to make matters worse I hyperextended my left knee on July 3rd. Kind of shot my summer. Went to the doc last Friday and he says my knee has developed a bone spur now. Oh great! Anyway, it just means I got another month or more of keeping any walking/standing to a minimum. *On the plus side one of my dogs is learning to fetch my tiny whoops, although the doggy slime factor can be an issue...just saying.* By the way, yes, I really loved my X9D but this QX7 is really nice. I especially love upgrading the firmware on receivers using the QX7, no muss, no fuss, just plug it in on the bottom and you're good as done. With the X9D you have to remove the module and then use the pins in back leaving it exposed while you are updating so it's easy to bend them. Other than that I don't find I miss anything between the two of them.

@frankbarajas 6 лет назад

Al - Thanks!

@MCsCreations 6 лет назад

Frank Barajas I'm sorry to hear that, dude. Hope you can get better. 😕 You too, DRONE review man of all drones! I have my problems too, so I can imagine how that should be. 😕

@zvonimirtrgovcic5499 6 лет назад

Is it possible to update the firmware on taranis x9d plus the same procedure

@AlbertKimTV 6 лет назад

I don't remember if it will work the same way or not. Check other videos on the X9D for the exact procedure.

@protofpv 6 лет назад

when i try to copy the updated sd card contents into the sd contents folder it says there are 260 files with the same name. do i just replace those? i would have loved to see you actually do the update so i could be sure at each step that i'm doing it right.

@AlbertKimTV 6 лет назад

Yes, just overwrite with the new files. I think most of them are just folders.

@protofpv 6 лет назад

thanks man. my first frsky,really didn't want to screw something up before getting to use it lol.

@DanielSingerX 6 лет назад

Noob question! Does doing this erase your saved models? Is there a back up u should do before?

@AlbertKimTV 6 лет назад

I think it does delete everything so you should backup to the SD card. I think there are tutorials on this already on RU-vid.

@flyerelite5153 3 года назад

Nice to know this now.

@craziestman31 2 года назад

Yes you should save then delete everything in your card yourself. Then after putting on the new downloaded files copy back on your SD card the 4 of the old files you saved : Eeprom, models, log and screenshots

@lday07 6 лет назад

Is it possible to copy models from my X9D plus over to an X-lite? Then simply bind to the receivers?

@AlbertKimTV 6 лет назад

I think you just need to copy them to microSD card and move the files over.

@adamtooyak4699 5 лет назад

Can i do this set up using my mobile phone? Dont have a laptop.

@AlbertKimTV 5 лет назад

I don't think so.

@adamtooyak4699 5 лет назад

@@AlbertKimTV i have a Samsung note 9, i downloaded the content i have a new sd in. trying to figure out how you Configured the set up

@AlbertKimTV 5 лет назад

I did everything on my PC, not my phone.

@clittlej5850 6 лет назад

Don’t mean to be flooding with comments but also; My controller turns off if I accidentally turn the left battery cap even a fraction of a hair counterclockwise. I had to secure it with electrical tape every time I charge the batteries as Iv had it turn off mid flight twice already.

@AlbertKimTV 6 лет назад

check the spring in the cap... it may need to be stretched out a little...

@clittlej5850 6 лет назад

Albert Kim thanks for the reply! I did actually try that, but was afraid of stretching it too far.. I’ll give it another tug next time I take them out and see if I can’t get it to contact better. Thanks again!

@pbarrick03 5 лет назад

Thank baby freaking Jesus. I cant connect to my pc for so screwered up reason with impulseRC driver fixer. So I cant waot to get home and do this!!!!

@flyerelite5153 3 года назад

This is so confusing what to do with the files

@isaaclyonsf1 6 лет назад

👍👍👍

@Crftbt 4 года назад

Does this wipe anything that's bound to it?

@AlbertKimTV 4 года назад

It shouldn't unless you make a change to the model files.

@Crftbt 4 года назад

@@AlbertKimTV you da real mvp

@Jago13381 7 месяцев назад

Hi Albert I followed your tutorial, changed 2 micro SD cards, tried from MAC, tried from Windows but the radio tells me that the SD folder is empty. Has anything changed to date?

@AlbertKimTV 7 месяцев назад

Card needs to be formatted FAT or FAT32 and can't be too big. I recommend 4GB or smaller cards.

@Jago13381 7 месяцев назад

Thanks a lot!