Best EASY IN DEPTH Unlimited Power Tutorial For Group Bases 

crazy how 3 years later this is still one of the simplest st8 forward guide to power and turrets

rust becomes so much more when you learn the electric part

Just wanted to say 3 years in advance and this circuit helped me a lot. The addition of electric furnaces, automation, etc made me have to find a better solution to my prior knowledge. Thank you

out of all the videos out there this is by far the best! THANK YOU

Too few views. This is the best electricity tutorial video out of all of them, and I have watched all of them. Well done.

What a video. This is so good, and works so well, easily expandable too! I've got this set up with 4 batteries and it works flawlessly! Thank you for making this, thank you for your time and thank you for allowing me to have a full working electrical system!

By far the best tutorial on this. Very nicely edited and explained. have a sub :)

+1, Best guide on the Rust electricity system that I've seen yet..

Best video on electric I have seen so far

Nice work bro this is what I was looking for 💯💯

Without a doubt the best tutorial out there!

easily the best video on electricity out there

You sir, got yourself a subscriber👍 And i recommend this to others as well 😁

first guide i actually understand and followed ingame , thanks for the video man

By faaaar the best electricity guide out there

yeah this should have more views. really helpful btw thanks!

best tutorial i have seen so far

Nice well explained, so essential the block has to be set higher to take over

A very good explanation! Ty☺️

This has helped me so much to understand the power update for console, very easy to follow, good job man 👍🏻💙

Really nice guide :) Ty for help ! You should really make more, very smooth

You make it look easy but it took me all day lol

This is a good guide for people with limited space in their bases, I also did circuits like this when I started in rust, but quickly discovered that really not worth the extra electricity components, specially when you are running 40, 50+ turrets and several circuits like this per battery / windmill, usually when taking patrol it destroy panels and windmills, after learning that the hard way, I stopped doing complex circuits like this with "perpetual" electricity, from now on, the minimum windmills I use are 6, plus a bunch of solar panels. Getting around 1200 + electricity and each battery for 6 turrets, using 1 smart switch and 3 splitters,( safe 64 points output) also adding several xor switches for rust+ phone alerts whenever the turret get a target. OP, if you have a chance let's connect I want to create a video of how to optimize windmills placement for maximum efficiency and space optimization, maybe we can work together.

Good Video :)

Really helpful 👌

bro that is some wic ked circitry lol mad props

seriously amazing bro i mean hats off to you because you absolutely killed it!!!

Going to try it tomorrow after work hopefully it works have a good base

REALLY helpfull, tnx

Man, you killed this. Sad to see you don’t upload anymore.

Perfect 🙏❤

you saved me u need more subs

Thanks

cool!

When the energy drops, the power is completely supplied from the battery and the incoming energy is ignored, even if it is low, how can we transfer the unused energy to another circuit?

is there more wind on the coast line in rust there should be

This was helpful for understanding but is there an up to date way of making a perpetual battery(infinite power)?

Good video. But my tiny brain hurts now. lol

When batteryes are run in parallel (aka using root combiners to join them), the power draw on each one will be the same power draw from the circuit making it twice the power used if using two batteryes, triple if tree and so on. Untill that bug will be fixed, we'r better off splitting the generator powerline using splitters and making this circuit for each battery we use istead.

are the batterys always losing power while connected into the root combiner, or does the blocker stop them draining?

So I did this setup and expanded on it a little bit but have a question. I have 6 lights setup hooked up to a switch and then a branch going to two splits, 2 sam sites running through a branch hooked up to their own switch in my core, 4 turrets on their own switch and a garage lift hooked up through this power system but I am still using much less than 199 power. Should I adjust the number to match my power usage on the branch that goes to the or switch/second branch so all the extra power goes to the 3 large batteries(300 output from the batteries to the root combiner that connects to the blocker) I have hooked up so I don't lose the use of my wind turbines at night and save the most energy? I am using 130 power to run everything I have so wouldn't it make since to send that extra 60+ power to batteries and just let me turbines run everything at night and still put power in the battieries? Averaging about 340 power in the day but peak at like 380 and. Mostly worried about someone destroying my turbines or panels somehow because I plan to set up at least 4 more turrets coming from this switch I already have in my core(I know the switch for turrets is mostly useless just messing around with what I can do). Still trying to understand this and don't want to mess with the blocker but from what I understand the blocker would allow the batteries to pass through to my base if the turbines or panels get griefed and they should be completely full?

to new people who are looking for circuits. these circuits are now obsolete. in the past batteries couldnt charge and decharge at the same time. nowadays they simultaneously are able to.

so,..i have a question. Im trying learn old fashion windmill electricity system - cuz the test gen on mid servers has ruined me lol My question is,... is i have 50 turrets or more set up on a base,... will these two large batteries be enough to sustain them, or will i need like 3 or 4 battery combo? Cuz, i figure more batteries ya have, the more back up juice ya have for later on during a raid; AND obviously you will need more windmills for larger turrets set up and for larger electrify consumption. Any help in making me better, is much appreciated, thanks!

The problem with this setup is that any input power below the first blocker's threshold is wasted at the OR switch. Let's say I set it to 150 for the first blocker. Night hits and the solar is 0, but I have a turbine at 130 power. The branch still sends the 130 to the OR switch at the same time the 200 power from the battery hits. Its not 330, but 200 only. So the 130 power is wasted. Am I missing something? I tried it out, and we have a 190 load. it slowly drained away.

How many turrets can you have from this power system & how much charge time do you get from it as well ?

I have a problem with this circuit/setup Normally if you have solar panels feeding into your batteries you will have a surplus in the day (the batteries will stay max charge) and a demand during the night (this will slowly drain your batteries because you are using the power) and that means your batteries will charge in the day and empty in the night. Now, all you have done is made it so the batteries will charge in the day and empty in the night, except with alot of extra steps and confusion. If I am wrong please point out the difference in a reply.

Im confused how this works, Im trying to power multiple things but all the power is going into the branch out and not equal in the power out?

I have 1 question. How do you add 6 batteries output, connect power in blocker. I tried using combiners but short circuit. Max depth. And my batteries are useless at that point

Very creative build. The only issue is that the large batteries were run in parallel (4:53) when you connected them to the Root Combiner. The problem is that each battery will register active usage on a single item and drain accordingly. For example, if you were to connect a single turret you'd find that each battery registered an active usage of 10 volts, effectively canceling out one of the batteries.

quick question, iv noticed at night time when the battery takes over the output is always 200 regardless of how much battery I want to use. Is there anyway to change this?

Is this an app? Or program for emulating power grid configuration añd optimization?

what if the wire doesnt reach the turrets/sam? what can i do or use to make it reach it

The root combiner will give the combined power of the batteries, however will draw from all the batteries. 4 batteries connected to root combiners will give 400 power, but if the circuit it's connected to only needs 100 power, 300 will be wasted. So even though 4 large batteries are root combined, your max capacity will only be 24,00rWm, not 96,000rWm.

for me this is very complicated i understand with 4 turrets but adding some i got really confused and made a bloody jungle in my base trying to get them all to work i didnt watch you show how to put the sam site and more turrets till after but im still a bit confused

How do I know which way is the best to put my wind turbines to?

Why wont they shoot though?

Tired of all the fake comments glazing about how good this video is I’ve rewatched this for 8 hours today trying still yet it wants to keep turrents on and then I have to turn the switch on for half of the others to turn on

Can you explain or make a video like this but with only wind turbines?

How to download

there is a issue that both batteries getting used ay same time with same amount of power why

should add not to leave root combiners on roof as you can break them with one bone knife and it ruins your circuit

ion understand it but it works 🤣

what is point of this if i can do same thing in 5 min ?

So what do you do if you only ahve 1 turbine how many root connectors you need ? Damn this shit too confusing lol

what if i want more than 4 turrets?

is this still work?

whats Sickening to me is YEARS ago, i did this before the videos came out, and they say i bring circuits made online And "copy them" THATS LIKE saying each computer uses their own Design, they all use the same damn circuits.

But why? Why not just combine all the power, put it directly into the splitter and into the batteries? Then take whatever power you need directly from the batteries. They can output while they are charging simultaneously.

where is the unlimited power........?

what a nightmare

I DONT GET THIS SHIT AT ALL

so this is unnecessarily complicated