Most SIMPLE HCI 306 GT-40 Combo // Dyno Horsepower Numbers

Подписаться 21 тыс.

Просмотров 18 тыс.

50% 1

Most SIMPLE HCI 306 GT-40 Combo // Dyno Horsepower Numbers
Matt and Tiffany Family RU-vid Channel: / @mattandtiffany
//MERCH - SUPPORT THE CHANNEL
-GearHead704 Shirt - Direct Messages me if you want one.
-Anything you buy from Amazon with this link helps at no extra cost to you: amzn.to/3aEqEul (Must buy something in 24 hours after clicking)
//FMR- FOX MUSTANG RESTORATION DISCOUNT CODE:
www.foxresto.com
Use Promo Code: gearhead704 for 10% off most items!
//COME SAY HI!
Instagram / gearhead704
FaceBook / gearhead704
TikTok gearhead_704
Matt and Tiffany RU-vid Chanel / @mattandtiffany
For business inquiries only contact 704gearhead@gmail.com
//MY FILMING GEAR
Go Pro: amzn.to/3mRzAPr
TriPod: amzn.to/2WLcxLA
Ring Light: amzn.to/3hqzXiY
MountDog Lights: amzn.to/38yAQSo
Music by these artists:
Hidden Agenda
Hidden Agenda by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
Subs to look back on 16,839.
#dyno #gearhead704 #foxbody #gt40 #hci
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content each week!
Additionally, any information provided in this video is not professional advice and should be acted on at the user’s own risk.

Авто/Мото

Опубликовано:

24 янв 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 126

@GearHead704 Год назад

Here's a link to the new family channel with me and Tiffany. www.youtube.com/@mattandtiffany

@keithbrembry8194 Год назад

Aye bro can I have your number jus question about my fox in what to do thank you

@darylfitzgerald1327 Год назад

Awesome Matt ,. I literally just saw this now. 👍

@luecreative Год назад

AYEE I KNOW THAT CAR!! Thanks for coming and capturing this moment with us man! Definitely one of my top 5 days of 2022!

@GearHead704 Год назад

Man it was a blast buddy! Thanks for letting me share some of the calypso journey here with the channel.

@BrailsfordsRides Год назад

Pretty much exactly my goals for my 4 eye as far as the basics of the build

@BrailsfordsRides Год назад

Was hoping to see it pop 300

@guyver650 Год назад

Good numbers and enjoyable on the street. My dyno was done at Dez Racing 306/Gt40p heads 277whp 324 back in 2011. Still running great.

@jennlknnc7135 Год назад

Good to see you both! Keep up the good work. Have a great weekend!

@GearHead704 Год назад

Thanks Jenn! I missed running into you guys at the Foxtoberfest show this year

@mustang91 Год назад

I love this video it shows what can be done on a budget nice video matt

@GearHead704 Год назад

Thanks much!

@darylfitzgerald1327 Год назад

Great job on the video,. The time you put in to making the footage is appreciated. My build is 80 percent done . It's snowing here in Boston and these videos keep me going. I'm looking forward to seeing all of you this year at foxtoberfest. Thanks Matt

@GearHead704 Год назад

Hey Daryl! 80% man you are so close, so Foxtoberfest should be a blast for you then! Hope to see you there and thanks for watching.

@jameyrichardson8967 Год назад

Great looking car always loved the build. Made good solid power and a great driver

@GearHead704 Год назад

I think so too! Thanks Jamey.

@VidTubeWatch Год назад

I'll definitely check out the new chanel with you and Tiffany.

@GearHead704 Год назад

Thanks VV, really appreciate it! I hope to put more content on there in the future.

@i-still-cruz2430 Год назад

Those are some very good numbers for the combo he has👍 Great looking car also 😎

@GearHead704 Год назад

I thought so too and yes the car is a great looking fox

@LalaFox92 Год назад

Great video! And car sounds nice and healthy!

@GearHead704 Год назад

Hey LaLa! Thanks and congrats on your great brand and channel growth of late

@70sport37 Год назад

Very classy fox !

@GearHead704 Год назад

💯

@ogsuperflygarage Год назад

Good video Matt! Awesome Fox! 💯👊🏾

@GearHead704 Год назад

Appreciate that buddy!

@myeighty-nine7813 Год назад

Thats super good for a gt40 setup, you car should be making a little over 300 to the wheels though Matt you gotta get her dynod again!

@GearHead704 Год назад

Yeah I was surprised, I think maybe my engine is tired.

@myeighty-nine7813 Год назад

@@GearHead704 Possibly but still I think theres something hiding away on your car or something that needs to be tuned out! some boost would fix that 👀👀👀 lol

@devingullatte3859 Год назад

This is exactly why I don’t want to change my gt40p heads because a lot of guys make similar power with aluminum heads

@midnight347 Год назад

@@devingullatte3859 some guys make similar power with aluminum heads because their combos aren't put together right and doesn't compliment one another. I'm talking about the heads and cam and intake if your combo isn't right or the cam is too small for the heads or you don't have an intake that takes advantage. This particular combo is just put together right with solid tuning. A good set of aluminum heads with a good matching cam and intake can make well over 300 like 330+ range pretty easy.

@devingullatte3859 Год назад

@@midnight347 I’m gonna tune mine soon I’m expecting around 285hp gt40ps b cam , 1.7rr , longtubes , explorer upper

@danvolker13 Год назад

Great video brother. Subbed to your other Chanel 🍻

@GearHead704 Год назад

Appreciate that Dan and awesome thank you!

@paulhudgins5120 Год назад

Awesome numbers for his setup, torque number is very good. Matt I think you and Harris need to do another driving video, I forgot about the removable steering wheel, honestly I never seen that done on purpose. It must be a Duke thing.

@GearHead704 Год назад

🤣 Definitely a Dook thing, lmao

@timwindsor03 Год назад

Thanks for sharing brother. Beautiful car. Thanks for sharing. Keep the content coming. Hope you have an incredible night. Tell TIFF hello. Love ya bro

@GearHead704 Год назад

Thank you Tim! Always appreciate your support.

@gr8tfoxes617 Год назад

Nice vid Matt. Lou’s car did well. Drive it and enjoy it. Respectable fun there to take to shows and drive anywhere with RELIABILITY! Such a shame quality has dropped in parts like it has. Surely puts a hamper on time and $$. See you guys in the Spring time for sure!

@GearHead704 Год назад

Thanks a lot buddy! Yeah parts have been frustrating lately for sure. Matt went through 4 distributors recently to get one to work. Unreal. Definitely looking forward to see you all out and about!

@ZXDF51 Год назад

Sure does sound good. 🐺

@TheSeanGTV Год назад

This car sounds beautiful!!! Harris is ready to take it on one of those longs ass drives. I remember he drove Grandpa to Florida! I was like 🤯🤯🤯🤯 lol

@GearHead704 Год назад

Yes, I remember that too! He really drives his cars. It's great to see.

@TheSeanGTV Год назад

@@GearHead704 definitely is!

@halljam70 Год назад

Which elgin cam is he running? Great looking car.

@chrishansen7004 9 месяцев назад

I bet there’s still 60HP left on the table. What cam does it have? These old windsors perform best with a cam that has a 107 lsa and Gt40’s do an amazing job with some porting

@GearHead704 3 месяца назад

600 lol. He thinks is has an Elgan cam.

@spassmore8483 Год назад

Great video I see that this car has barely anything done to it and in my opinion makes a ton of power for what it is like you said it would definitely benefit from a new MAF but other than that I think the horsepower numbers would be almost even with yours?. I don't understand there has to be some kind of work done on those heads to be making that kind of power pretty cool though super clean love the way everything has been painted and detailed under the hood another gorgeous 🦊 😍 ... I checked out your new channel by the way left you a comment there and sub'd! Hopefully we get to see those 18in reimagined cobras on Tarheel soon!

@GearHead704 Год назад

Thanks Shifty! I wonder if my 306 may be a little tired? IDK, but I was surprised by the numbers for sure. I was trying to get the 18s mounted yesterday but had some issues getting local tire shops to mount the tires, hopefully next week though! Thanks much for the sub over there, I definitely need to put some more content on that channel soon. Have a great day!

@spassmore8483 Год назад

@@GearHead704 well you could kind of get an idea by doing a compression test to see what the numbers are in all 8 cylinders and also what your oil pressure is can give you a little bit of an idea to depending on how the motor was built for bearing tolerances and what oil pump etc... I'm sure Matt from foxresto would be able to give you a good idea once you guys do a compression test I've had a buddy that ran the same setup you are and he was right around 300 so I think you're pretty decent there's other things that you can probably do to gain a little bit to get a little more he had an electric fan and no power steering but if it's a driver and definitely want your power steering unless you do like a Volvo electric pump or something so that kind of bumps it up HP a little bit too! I thought it was really low because I had an Edelbrock set up on my car and I used to put 2-3 car lengths on him every time we ran against each other and he had a fresh motor and his didn't rev as high either but some combos or just odd balls I think my car was gifted one of those Wednesday cars or something LOL

@kpkp2655 Год назад

Calypso fast back. That is a rare sight. He should not redo the bodywork, keep it as is with the dents and dings. Adds character.

@GearHead704 Год назад

I agree with you KP KP, that's the way I like it too.

@luecreative Год назад

That's my plan! This thing has a wild story and I'm proud of every ding and scratch!

@robertwest3093 Год назад

Excellent numbers for a gt40 setup. Even the AFR heads only go around 300 or so depending on tune.

@midnight347 4 месяца назад

The best heads cam intake setups for stock bottom can make 320+ of its a really well thought out Max effort combo but this is solid for gt40 stuff.

@bradykile4598 4 месяца назад

I had gt40 heads. Gt40p intake. Lightly ported stuff. B cam. E85. Don't even think fuel made a difference but that combo made just over 300 to tore. BBK shorty headers. And that's it

@bpturbo27 11 месяцев назад

👏

@GearHead704 19 дней назад

👊

@willsmith8586 4 месяца назад

I feel like your vert should be making more power than that with the TFS kit. Maybe roller rocker sizing or maybe your motor was built a tad tight. I know a tight timing change can consume up to 10 HP, which is crazy. The Calypso might have the opposite. it sounds like the motor has a bunch of used parts. I wouldn't be surprised if that timing chain was already broke in. He might be running those Cobra 1.7 Rockers as well. The custom cam is probably perfect for it.

@GearHead704 4 месяца назад

I agree with you, the vert should. We actually found some computer and computer injector harness problems that I think will fix the car the next time it goes on the dyno.

@mike4fo Год назад

Not bad my stock bottem end original 302 made 290whp and 311tq on a mustang dyno Ruth a trickflow top end kit and stage 1 cam

@GearHead704 Год назад

Good to know! I think my 306 engine may be a little tired.

@hotrodray6802 Год назад

You need to vary the cam advance until you hit the sweet spot. Usually good for 20/20. Yes its a pain on a SBF and costly on the dyno, but ......

@whatthefox302 Год назад

Do you run a stock ECU in your Vert? Also is it an auto or a manual? I believe if you do aftermarket H/C/I then the stock ECU is trash you need something aftermarket just like all the aftermarket stuff on the engine itself. Definitely need to think about that cause a custom dyno tune on a Holley Terminator X would be a better option than that stock stuff!

@GearHead704 Год назад

My vert is a stock ECU with a SuperChip. It is a manual (T-56 Magnum). We are going to build my 347 on a stock ECU with a SuperChip and 90mm MAF and will see how that guys. If numbers are low I'll definitely look into something like a Terminator X.

@matteovanzant270 Год назад

Ever seen any Carolina Ford Dealer 25th anniversary edition mustangs? I'm about to own my second one 👍

@GearHead704 Год назад

My vert is from a NC Ford dealership and is 25th anniversary, but I think it came from Bob Dunn Ford originally.

@matteovanzant270 Год назад

@@GearHead704 I heard there were only 500 units. My first one was a auto, this one's a manual. Both are notchback. Both owned by my grandpa. Both from Mooresville Ford. Been trying to estimate how many are still around with original trim. Appreciate the reply 👍

@bryancrowe3942 Год назад

Do you know what type of window louvers is on that ride and where I can get them?

@GearHead704 Год назад

Sadly I do not, but you can try asking Harris. He has his own RU-vid channel and is on social media pretty much everywhere as LueCreative.

@luecreative Год назад

They're an OG set from my buddy's 4-eye. No clue the brand, but I had to cobble together the hardware because some was lost!

@crazyhorseracing6130 Год назад

What's the wheel size set up on the car?? Thanks for the videos!!

@GearHead704 Год назад

They are 18'x but I don't know by 18x what. So, I"m not sure :-(. You could check with Harris on his social media (@luecreative) and he also has a RU-vid channel. too. Glad you enjoyed the video.

@arturo5819 Год назад

I wonder if they changed springs on heads for cam? Shouldn't be running out of air with that combo. Good numbers though should be a fun car

@GearHead704 Год назад

I'm curious as well. He has been loving it so far.

@midnight347 4 месяца назад

I bet he did it's making solid power for a gt40 setup

@Shawn_42850 Год назад

What’s the lift/duration numbers on the Elgin cam?

@GearHead704 Год назад

Sadly, I"m not sure :-(. You could check with Harris on his social media and he also has a RU-vid channel. He might know.

@Shawn_42850 Год назад

@@GearHead704 that’s a nice little combo he has going on.

@JBAutomotive794 Год назад

Mark Walberg is into Foxbodys!

@tommytorres12 Год назад

Hey i need the placket on the cobra in take

@GearHead704 Год назад

They are getting harder to find for sure.

@luecreative Год назад

That's a custom piece made by Tom Clark at SinisBuilt!

@KASLCustoms Год назад

Great video buddy! What are you guys doing dressing like Canadians 🇨🇦😂👊

@luecreative Год назад

It does get cold down here from time to time, just not as intense and definitely not as long 😂😂😂

@GearHead704 Год назад

LOL, you would probably still be wearing t-shirts but we aren't used to this cold, lmao

@KASLCustoms Год назад

@@GearHead704 🤣👊👊

@tonydelgado2170 5 месяцев назад

What wheels and size are those?

@GearHead704 5 месяцев назад

18 inch Saleen SSCs. You can find out more info on his instagram @luecreative

@josephleonardi8977 Год назад

Don't knock the GT 40's Matt!!😜😜😜😜 they'll surprise ya!!! And no bloopers!!?? Im upset!!😜😜

@GearHead704 Год назад

Hey Joe! I was totally surprised as you can see lol. Man, I was sad to see I didn't mess up any either this time LOL

@josephleonardi8977 Год назад

@@GearHead704 with that said.... You will be going for a ride with me in May..... And ill let the bloopers go for this time!!😜😜😜😜😜😂🤣😂🤣

@El_Escobar612 Месяц назад

What color is that?

@GearHead704 Месяц назад

Calypso

@89gt5.0 Год назад

Was he running the stock computer ?

@GearHead704 Год назад

Yes, we a superchip

@fast02gt Год назад

Shouldn’t run out of MAF if it’s a 93 cobra MAF, unless that cam is doing it…I wonder what compression is.

@GearHead704 Год назад

They had an aftermarket 75mm ProAm MAF, but had to go back to a regular 89-93 5.0 style MAF as that was all that was available. Not sure on compression unfortunately.

@hotrodray6802 Год назад

@@GearHead704 Aren't most of those heads the same as stock 62cc @ 9.0 ?

@jmanthatsall441 Год назад

Line that door up right

@79beans347 Год назад

Not bad for the combo. Im still surprised yours only did 287 with the whole trick flow top end kit . Maybe the tight new rings hurt yours some and now it will make more power now that its broken in. I ran gapless rings in my stock 289 and only got 422 rwhp with a 2 bbl and manifolds🤥🤥🤥🤥 ok im lying its 347 🤣

@GearHead704 Год назад

lol you almost had me! Actually my 306 wasn't rebuilt it was just pulled from my SSP, so maybe it's actually a little tired? IDK, but I can't wait to see what my 349 does. Hopefully this year.

@79beans347 Год назад

Thats right its been a min since you did it. Your 349 is going to make some steam I cant wait to see it in action

@hotrodray6802 Год назад

Perfect Seal does not recommend gapless rings for street engines. They said that they don't last very long. Implying 20,000 is about it.

@79beans347 Год назад

@@hotrodray6802 At the rate I drive this thing that means ill need a rebuild in 50 years cause its not a daily , heck its not even a weekly , might be a bi weekly

@24theMoney Год назад

Those louvers are causing a 5 hp loss.

@midnight347 4 месяца назад

Agreed louvers are trash lol

@02autogt Год назад

Owns a Mustang and is supposedly a Mustang guy but doesn't know what parts are on his own car...😒

@GearHead704 Год назад

The community embraces all

@luecreative Год назад

It's been built over the last four years, engine build was done in 2019, it's been down for over a year... I def haven't memorized the parts list through the chaos!