Works on M1009
M1008 M1028 M1010
The Solenoid I’m using
HVACSTAR Military Vehicle Army... www.amazon.com/dp/B077ST84NV?...
The Napa solenoid
www.napaonline.com/en/p/ECHST85
GLOW PLUG RELAY G
Description: The glow plug relay is an electro-mechanical switching device
with two large copper electrical studs and two small electrical steel studs.
Function:
When the glow plug relay coil is activated (at the two small steel studs) by the glow plug control module, electrical current creates a magnetic force in the coil that kicks the plunger out against two large copper terminals. This, in-turn, allows current to. flow from the ballast resistors to the glow plugs.
Location: The glow plug relay is attached to the engine compartment
bulkhead, left of the vehicle's center line
GLOW PLUG @
Description:
The CUCV 6.2 diesel engine glow plugs are temperature self-regulating. This offers a rapid glow plug temperature rise, but does not require the critical shut-off timing and cycling that a commercial glow plug system does.
Function:
To rapidly heat the cylinder prechamber to aid in starting a cold engine (not at operating temperature).
The glow plugs are designed to operate under three condi-tions:
• "PRE-GLOW" ....
... cycle during the amount of time that
the "WAIT" Light is on.
• "CRANKING GLOW"... glow plugs remain on during the engine
cranking period.
• "AFTER GLOW"…..... depending on engine temperature, the
glow plugs can remain cycling for up
to 90 seconds after engine start-up.
Location: The glow plugs (eight in all) are threaded into each of the
cylinder prechambers (four in each head) between the fuel injection nozzle and the exhaust manifold
Buy shirts here teespring.com/stores/cherokee...
Do you like dirt bike stuff subscribe to fist full of dirt
/ @fistfullofdirt
Cheap Cherokee build • cheap cherokee build
Facebook profile.php?...
My guitar channel / ronaldleggettjr
#ClatterWagon #detroitdiesel #chevytruck #diesel
21 июл 2024
