Silverado 2500 lift kit install - control arms, shocks, axles, front diff (part 2)

Подписаться 422 тыс.

Просмотров 16 тыс.

50% 1

This is a multi-part series on installing a 3" lift kit on a 2009 Chevy Silverado 2500 HD. This kit was purchased at www.rockymountainsusp.com/ and was manufactured by Zone Offroad. Here is the link for this exact kit:
www.rockymountainsusp.com/lift...
In this part 2 video my brother and I will be showing you guys how to remove the upper control arms, front axles, front shocks and the front differential.
Here is a link to my brothers channel
/ @jamesdanner7850
Playlist
- 2009 Chevy Silverado 2500 3" lift kit install
• 2009 Chevy Silverado 2...
Related videos:
- Silverado 2500 lift kit install - torsion bar keys (part 1)
• Silverado 2500 lift ki...
- Silverado 2500 lift kit install - front diff lowering kit and install (part 3)
• Silverado 2500 lift ki...
- Silverado 2500 lift kit install - install control arms, axles, shocks, torsion keys (part 4)
• Silverado 2500 lift ki...
- Silverado 2500 lift kit install - rear block install, final pics (part 5)
• Silverado 2500 lift ki...
For more information on this topic, I have written a “field manual” called Engine Performance Diagnostics which is available at www.scannerdanner.com as an eBook or paper book.
Want even more diagnostic training? Whether you are a DIY trying to fix your own car, someone looking to become an auto technician, or a current auto technician that wants to get more into diagnostics, subscribe to ScannerDanner Premium www.scannerdanner.com/join-sc... There is a 14 day free trial.
On ScannerDanner Premium I will bring you right into my classroom at Rosedale Technical College. You will find page for page lectures taken right from my book as well as exclusive classroom type case studies. What is so special about these classroom case studies? I pull live problem vehicles directly into my classroom and we troubleshoot them in real time, using and applying the theory and testing procedures we learn during the classroom lectures. There is no better on-line training of how to troubleshoot automotive electrical and electronics systems anywhere!
Disclaimer:
Due to factors beyond the control of ScannerDanner LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ScannerDanner LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ScannerDanner LLC recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ScannerDanner LLC, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ScannerDanner LLC.

Авто/Мото

Опубликовано:

17 мар 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 78

@pedrolriveranegron5178 8 лет назад

For me all videos these two are the best !!! Work, share, discuss, have a few beers, spend time with our brothers !! Priceless....and especially to see our own brother do all the work, it is something very special !!! CONGRATS DANNER!!!!!!!!!!

@jamesdanner7850 8 лет назад

hey. I didn't ask for anything but he paid me well.. then wife took it and bought daughters prom dress.... barf

@pedrolriveranegron5178 8 лет назад

Haaaaaaaaa!!! That's great, wives always win!!!!! Congratulations to your daughter at her graduation....Keep working my frined and be safe!!! BLESSINGS...

@ScannerDanner 8 лет назад

+James Danner barf for sure! She's not allowed to have a date......ever

@ro-longo3697 8 лет назад

I love the part where you were concerned about the slots on the passenger side of the front diff and then James starts to remove the bolts and says "I am not concerned about it"

@dReMiXeDg 8 лет назад

some great brother bonding. i work with my brother day and night we are partners nothing is better when you have a real good relationship with your brothers. kudos to the both of you.

@SmittySmithsonite 8 лет назад

This type of work always gets my blood boiling! I remember trying to remove the front diff on my '89 S10 Blazer - problem was, I installed a '00 Jimmy 4.3 V6 (stripped all F.I. & electronics off - went carb & HEI ignition :) ), and that big aluminum oil pain was right in my way. Then, I had to weld a 18mm socket to a head bolt out of a '00 Ford Focus, just to hold one of the bolts up top. Still didn't quite fit right, so in frustration I cut the hole bigger & was finally able to get in there. After wrestling this thing, laying on my back in my driveway, outside, in 30° temps, I find that I STILL don't have the clearance to drop the oil pan to fix a major oil leak I had at the timing cover. So I just wasted 2 days of effort for nothing! I heard my voice echo through the neighborhood that day ... :D Ended up having to pull the engine, just a year after I had originally installed it. You'd think I'd have replaced ALL the gaskets before installing, right? LESSON LEARNED! :D :D

@james69roy 8 лет назад

yea james I feel for yea my lil brother makes me do all the work to

@wyattoneable 8 лет назад

Can't wait to see how this turned out guys. It's been fun hanging out.

@SteveRobReviews 8 лет назад

Nice stuff guys. Pocket screwdriver, hats, and shirts , you forgot the Scannerdanner test light and tool box stickers. LOL

@jamesdanner7850 8 лет назад

I defiled one of your stickers during this job. ha. I hope it makes the cut

@SteveRobReviews 8 лет назад

James Danner I always have more LOL

@toyotatechMDT 8 лет назад

You guys are funny together! All it needs is a Clarke appearance!

@wtbm123 8 лет назад

Oh that was funny when you got the ball joint nut off . Reminds me of the first time i ever cut u bolts off a rear end that was laying on the ground . Glad you are learning to turn wrenches , lol

@ScannerDanner 8 лет назад

+wtbm123 haha yep. Did you see that upper control arm almost hit my head? I didn't know it until the editing

@tomduncan1970 8 лет назад

+ScannerDanner That was wayyyyy to close!

@ozzstars_cars 8 лет назад

It's a time consuming job and a big PIA! I cant imagine doing this one solo, that front diff is not fun. Looking forward to seeing part 3. I hear that cough coming on....glad your over it now!! Take it easy

@ScannerDanner 8 лет назад

+Ozzstar thanks brother

@muddytrails1666 8 лет назад

+ScannerDanner - When I worked at a GM dealer, we would remove the three bolts out of the steering box, that attach the it to the frame, and push the whole unit forward. It gave us just enough room to rotate the diff a little and drop it out.

@ScannerDannerPremium 8 лет назад

+Muddy Trails good tip man, thanks!

@abdullahfarag6358 8 лет назад

THIS IS WHAT I CALL MORE THAN INTERSTING :)

@nicholaselias8542 8 лет назад

I use the 1/2" milwaukee m18 fuel high torque. I never use air tools anymore. Might invest in the smaller one also

@Mikeywil0003 8 лет назад

Paul, you mentioned having pocket screwdrivers, tshirts, and hats made with your logo on them. What about stickers? I think Snap-On should start putting your logo on the Verus, as much as you use one.

@charlieb.8441 8 лет назад

You and your brother are among the most knowledgeably adept dudes to ever spin a wrench! I subscribe and am trying to watch ALL of the Danner boys vids. P/S had a friend who campaigned on of 100 69' Hemi factory Darts.Got to fire it up n pull it out of the garage and up onto the "White Whale big Dodge race car hauler back when SS/AA was fun!

@ScannerDanner 8 лет назад

+Charlie B. thanks Charlie

@lukeloader 8 лет назад

Remove the three bolts holding the steering gear to the frame then slide the gear forward and the center link will go with it and give you more room to remove the diff.

@ScannerDanner 8 лет назад

+lukeloader good tip!

@motorcyclesandridingfree2899 8 лет назад

Hope he's charging you by the hour lol. It's a fun project that's for sure

@testbooster 8 лет назад

You guys are funny as Sh*&t working together....good stuff

@Mr.Beastforpresident 5 лет назад

Twisting a bushing is true when it settles but the same is true when you jack the truck back up. So really the trick is to not tighten them enough to put the bushings in a bind to begin with. Same is true for shocks with eyelet bushings.

@ivansperanza 8 лет назад

Just messing with you man,I know what you meant☺,nice seeing you guys working together.

@nickguitarguy1 7 лет назад

I love how the guy that said it's mindless, broke the abs wire clip right after... maybe there is not so much of mindless going on when you are watching.

@ScannerDanner 7 лет назад

Lol, didn't mean to offend anyone. It's just not the same as electronic troubleshooting is all we ment.

@79wobbie 8 лет назад

looks like fun that should be the same as an 07 right

@rbbbjl1 8 лет назад

paul u called it mindless work, wrenching on cars, do u feel the same way at the end of part 2? There was several mistakes made because of not THINKING! things out. I don't think u meant any disrespect by saying it's mindless work, it just a different THOUGHT process. Thanks to u and james and the shop for letting us see it as it happens.

@ScannerDanner 8 лет назад

+rbbbjl1 forgive me, I meant no disrespect. It's just different type of thinking and I agree that even the stuff that we did in this video not everyone can do! It takes a certain skill set to be a mechanic and you either have it or you don't. But no doubt, when it comes to troubleshooting electrical problems, that it is a totally different mindset.

@drivewasher 8 лет назад

Hey Paul, That's what we in UK call a "lightening" hammer....... It never strikes in the same place twice lol

@ScannerDanner 8 лет назад

+Steve Ashcroft lol

@MrPami9899 8 лет назад

awesome project, you guys look like you are having fun

@eddiemartinez265 7 лет назад

Steve Paul is jimmy is doing all the work but that is the way it always is.

@olipirard 8 лет назад

What a fight!!

@nestrac 8 лет назад

Well. Scanner.... There is the wires to the ABS Sensor.... so you might be able to fix it...

@ScannerDanner 8 лет назад

+Carsten Langbo hahahaha

@todayintheshopbanksy5904 8 лет назад

Paul, here in the UK, we would have to tell the insurance company that we had modified the car/ truck, is that the same over there?

@ScannerDanner 8 лет назад

+WhitwellMike B I think that applies here but only with new vehicles

@eddiemartinez265 8 лет назад

Hey guys get clark to help ha ha ha !

@wysetech2000 8 лет назад

The Danner Bros. comedy show...."Paul Danner tried to diagnose....CAN'T" HaHaHa.

@ScannerDanner 8 лет назад

+wysetech2000 haha loved it

@codywichman213 8 лет назад

I want a scanner danner pocket prybar

@mellodan 8 лет назад

That impact hanging off the bolt on the passenger side is just asking to drop on someones head!

@ScannerDanner 8 лет назад

+Dan in ND when was that?

@lopezgoenitz3488 8 лет назад

+ScannerDanner last few mins of the clip look near the passenger side wheel

@mellodan 8 лет назад

48 minutes in and to the end- looks like it hanging on a bolt head...

@charlieb.8441 8 лет назад

Question,Isn't the patent on the longitudinal torsion bar suspension still property if Chrysler or now Fiat.Didn't Ford have to pay them or make a deal when they used it in the Explorer?

@ScannerDanner 8 лет назад

+Charlie B. not sure dude

@justinwilliams3933 8 лет назад

where can we buy a scannerdanner pocket screwdriver? lol

@ScannerDanner 8 лет назад

+Justin Williams soon

@justinwilliams3933 8 лет назад

+ScannerDanner okay. let us know when they become available. thanks Paul

@TheZrpilot 8 лет назад

I've pulled my front diff and yep.. center link had to come off :-(

@ScannerDanner 8 лет назад

+Max for sure

@shawnbauman5463 8 лет назад

"Nothing a couple zip ties won't fix." ROFL!!!

@MrPami9899 8 лет назад

Is that a Dmax diesel???

@hansreichwagen8015 8 лет назад

Get rid of trans jack and it will twist out, lifts on newer trucks are a pain.

@ScannerDanner 8 лет назад

+Hans Reichwagen I don't think it would have but I was thinking along the same lines

@wilbert-oppegard 8 лет назад

man that upper control arm was so close to hitting you in the face

@happy543210 8 лет назад

isn't "chevrolet" french for "oil leak"?

@ScannerDanner 8 лет назад

+happy543210 lol

@ivansperanza 8 лет назад

Wrenching is a mindless job,is that what u said?

@ScannerDanner 8 лет назад

+Ivan Speranza I apologize my friend. I meant no disrespect. It truly does take a special talent to be a "wrench"! Trust me, I know this first hand from being a mechanic instructor for 16 years. There are super smart people that can't fix a sandwich. It's one thing to know it upstairs, it's another to be able to take that knowledge to your hands. I was speaking more on the amount of variables when it comes to electrical systems troubleshooting and how brain taxing it can be at times. Say as opposed to separating a ball joint. Though I almost kissed that upper control arm didn't I? And that was from not paying attention!

@jamesdanner7850 8 лет назад

awe man. a cliffhanger. ... you are rotten

@ScannerDanner 8 лет назад

+James Danner :) too many parts bro. Part 3 ended up being just over an hour long and I'm trying to group this project into segments. In part 3 we cut the frame and install the new diff parts and install the diff

@MrPami9899 8 лет назад

+ScannerDanner hey paul, why GM don't use a solid axle in the front,like ford and ram,this is a heavy duty truck

@alexlacey9808 8 лет назад

+STEEVE DAVID Nicolas solid axles dont ride as smooth as independent suspension and gm has a really solid front end just no need for solid axles here.

@MrPami9899 8 лет назад

It ride like a cars then???lol

@alexlacey9808 8 лет назад

That's what the customers want...

@haywardsautomotive6156 8 лет назад

Your brother wasn't getting concerned with anything you were saying. He was having fun ragging on you. You should have heard me yelling just cut the damn thing & get it out of your way! I will say you with an impact looks as much out of place as James would be with the Smart Board. James teaching your class probably would have your students saying what did he say especially if he drew a diagram like in his clogged exhaust video but it would be entertaining.

@ScannerDanner 8 лет назад

+Hayward's Automotive haha for sure

@billrimmer5596 8 лет назад

Well the work we do is mindless as u said. U almost became chinless doing it however. Us wrenchers, even though we drag our knuckles do have to think a little. Talkin' about Paul not u James. Jk